summaryrefslogtreecommitdiff
path: root/manual/install.texi
diff options
context:
space:
mode:
Diffstat (limited to 'manual/install.texi')
-rw-r--r--manual/install.texi167
1 files changed, 42 insertions, 125 deletions
diff --git a/manual/install.texi b/manual/install.texi
index 2907715abc..0cd4d622de 100644
--- a/manual/install.texi
+++ b/manual/install.texi
@@ -14,15 +14,7 @@ installation. It is updated more frequently than this manual.
Features can be added to GNU Libc via @dfn{add-on} bundles. These are
separate tar files, which you unpack into the top level of the source
tree. Then you give @code{configure} the @samp{--enable-add-ons} option
-to activate them, and they will be compiled into the library. As of the
-2.2 release, one important component of glibc is distributed as
-``official'' add-ons: the linuxthreads add-on. Unless you are doing an
-unusual installation, you should get this.
-
-Support for POSIX threads is maintained by someone else, so it's in a
-separate package. It is only available for GNU/Linux systems, but this will
-change in the future. Get it from the same place you got the main
-bundle; the file is @file{glibc-linuxthreads-@var{VERSION}.tar.gz}.
+to activate them, and they will be compiled into the library.
You will need recent versions of several GNU tools: definitely GCC and
GNU Make, and possibly others. @xref{Tools for Compilation}, below.
@@ -32,7 +24,6 @@ GNU Make, and possibly others. @xref{Tools for Compilation}, below.
* Running make install:: How to install it once you've got it
compiled.
* Tools for Compilation:: You'll need these first.
-* Supported Configurations:: What it runs on, what it doesn't.
* Linux:: Specific advice for GNU/Linux systems.
* Reporting Bugs:: So they'll get fixed.
@end menu
@@ -42,34 +33,31 @@ GNU Make, and possibly others. @xref{Tools for Compilation}, below.
@cindex configuring
@cindex compiling
-GNU libc can be compiled in the source directory, but we strongly advise
-building it in a separate build directory. For example, if you have
- unpacked
-the glibc sources in @file{/src/gnu/glibc-2.3}, create a directory
+GNU libc cannot be compiled in the source directory. You must build
+it in a separate build directory. For example, if you have unpacked
+the glibc sources in @file{/src/gnu/glibc-2.4}, create a directory
@file{/src/gnu/glibc-build} to put the object files in. This allows
-removing the whole build directory in case an error occurs, which is the
-safest way to get a fresh start and should always be done.
+removing the whole build directory in case an error occurs, which is
+the safest way to get a fresh start and should always be done.
From your object directory, run the shell script @file{configure} located
at the top level of the source tree. In the scenario above, you'd type
@smallexample
-$ ../glibc-2.3/configure @var{args@dots{}}
+$ ../glibc-2.4/configure @var{args@dots{}}
@end smallexample
-Please note that even if you're building in a separate build directory,
-the compilation needs to modify a few files in the source
+Please note that even though you're building in a separate build
+directory, the compilation needs to modify a few files in the source
directory, especially some files in the manual subdirectory.
@noindent
-@code{configure} takes many options, but you can get away with knowing
-only two: @samp{--prefix} and @samp{--enable-add-ons}. The
-@code{--prefix} option tells @code{configure} where you want glibc
-installed. This defaults to @file{/usr/local}. The
-@samp{--enable-add-ons} option tells @code{configure} to use all the
-add-on bundles it finds in the source directory. Since important
-functionality is provided in add-ons, you should always specify this
-option.
+@code{configure} takes many options, but the only one that is usually
+mandatory is @samp{--prefix}. This option tells @code{configure}
+where you want glibc installed. This defaults to @file{/usr/local},
+but the normal setting to install as the standard system library is
+@samp{--prefix=/usr} for GNU/Linux systems and @samp{--prefix=} (an
+empty prefix) for GNU/Hurd systems.
It may also be useful to set the @var{CC} and @var{CFLAGS} variables in
the environment when running @code{configure}. @var{CC} selects the C
@@ -103,11 +91,15 @@ compile glibc with a newer set of kernel headers than the ones found in
@file{/usr/include}.
@item --enable-add-ons[=@var{list}]
-Enable add-on packages in your source tree. If this option is specified
-with no list, it enables all the add-on packages it finds. If you do
-not wish to use some add-on packages that you have present in your source
-tree, give this option a list of the add-ons that you @emph{do} want
-used, like this: @samp{--enable-add-ons=linuxthreads}
+Specify add-on packages to include in the build. If this option is
+specified with no list, it enables all the add-on packages it finds in
+the main source directory; this is the default behavior. You may
+specify an explicit list of add-ons to use in @var{list}, separated by
+spaces or commas (if you use spaces, remember to quote them from the
+shell). Each add-on in @var{list} can be an absolute directory name
+or can be a directory name relative to the main source directory, or
+relative to the build directory (that is, the current working directory).
+For example, @samp{--enable-add-ons=nptl,../glibc-libidn-2.4}.
@item --enable-kernel=@var{version}
This option is currently only useful on GNU/Linux systems. The
@@ -194,11 +186,10 @@ produce a lot of output, some of which may look like errors from
@code{make} but isn't. Look for error messages from @code{make}
containing @samp{***}. Those indicate that something is seriously wrong.
-The compilation process can take several hours. Expect at least two
-hours for the default configuration on i586 for GNU/Linux. For Hurd,
-times are much longer. Some complex modules may take a very long time
-to compile, as much as several minutes on slower machines. Do not
-panic if the compiler appears to hang.
+The compilation process can take a long time, depending on the
+configuration and the speed of your machine. Some complex modules may
+take a very long time to compile, as much as several minutes on slower
+machines. Do not panic if the compiler appears to hang.
If you want to run a parallel make, simply pass the @samp{-j} option
with an appropriate numeric parameter to @code{make}. You need a recent
@@ -337,11 +328,18 @@ recommend GNU @code{make} version 3.79. All earlier versions have severe
bugs or lack features.
@item
-GCC 3.2 or newer
+GCC 3.4 or newer, GCC 4.1 recommended
The GNU C library can only be compiled with the GNU C compiler family.
-As of the 2.3 release, GCC 3.2 or higher is required. As of this
-writing, GCC 3.2 is the compiler we advise to use.
+For the 2.3 releases, GCC 3.2 or higher is required; GCC 3.4 is the
+compiler we advise to use for 2.3 versions.
+For the 2.4 release, GCC 3.4 or higher is required; as of this
+writing, GCC 4.1 is the compiler we advise to use for current versions.
+On certain machines including @code{powerpc64}, compilers prior to GCC
+4.0 have bugs that prevent them compiling the C library code in the
+2.4 release. On other machines, GCC 4.1 is required to build the C
+library with support for the correct @code{long double} type format;
+these include @code{powerpc} (32 bit), @code{s390} and @code{s390x}.
You can use whatever compiler you like to compile programs that use GNU
libc, but be aware that both GCC 2.7 and 2.8 have bugs in their
@@ -350,7 +348,7 @@ floating-point support that may be triggered by the math library.
Check the FAQ for any special compiler issues on particular platforms.
@item
-GNU @code{binutils} 2.13 or later
+GNU @code{binutils} 2.15 or later
You must use GNU @code{binutils} (as and ld) to build the GNU C library.
No other assembler or linker has the necessary functionality at the
@@ -365,11 +363,10 @@ understand all the tags used in the document, and the installation
mechanism for the info files is not present or works differently.
@item
-GNU @code{awk} 3.0, or some other POSIX awk
+GNU @code{awk} 3.0, or higher
-@code{Awk} is used in several places to generate files. The scripts
-should work with any POSIX-compliant @code{awk} implementation;
-@code{gawk} 3.0 and @code{mawk} 1.3 are known to work.
+@code{Awk} is used in several places to generate files.
+@code{gawk} 3.0 is known to work.
@item
Perl 5
@@ -409,86 +406,6 @@ GNU @code{gettext} 0.10.36 or later
You may also need these packages if you upgrade your source tree using
patches, although we try to avoid this.
-@node Supported Configurations
-@appendixsec Supported Configurations
-@cindex configurations, all supported
-
-The GNU C Library currently supports configurations that match the
-following patterns:
-
-@smallexample
-alpha@var{*}-@var{*}-linux
-arm-@var{*}-linux
-cris-@var{*}-linux
-hppa-@var{*}-linux
-i@var{x}86-@var{*}-gnu
-i@var{x}86-@var{*}-linux
-ia64-@var{*}-linux
-m68k-@var{*}-linux
-mips@var{*}-@var{*}-linux
-powerpc-@var{*}-linux
-s390-@var{*}-linux
-s390x-@var{*}-linux
-sparc-@var{*}-linux
-sparc64-@var{*}-linux
-x86_64-@var{*}-linux
-@end smallexample
-
-Former releases of this library (version 2.1 and/or 2.0) used to run on
-the following configurations:
-
-@smallexample
-arm-@var{*}-linuxaout
-arm-@var{*}-none
-@end smallexample
-
-Very early releases (version 1.09.1 and perhaps earlier versions) used
-to run on the following configurations:
-
-@smallexample
-alpha-dec-osf1
-alpha-@var{*}-linuxecoff
-i@var{x}86-@var{*}-bsd4.3
-i@var{x}86-@var{*}-isc2.2
-i@var{x}86-@var{*}-isc3.@var{n}
-i@var{x}86-@var{*}-sco3.2
-i@var{x}86-@var{*}-sco3.2v4
-i@var{x}86-@var{*}-sysv
-i@var{x}86-@var{*}-sysv4
-i@var{x}86-force_cpu386-none
-i@var{x}86-sequent-bsd
-i960-nindy960-none
-m68k-hp-bsd4.3
-m68k-mvme135-none
-m68k-mvme136-none
-m68k-sony-newsos3
-m68k-sony-newsos4
-m68k-sun-sunos4.@var{n}
-mips-dec-ultrix4.@var{n}
-mips-sgi-irix4.@var{n}
-sparc-sun-solaris2.@var{n}
-sparc-sun-sunos4.@var{n}
-@end smallexample
-
-Since no one has volunteered to test and fix these configurations,
-they are not supported at the moment. They probably don't compile;
-they definitely don't work anymore. Porting the library is not hard.
-If you are interested in doing a port, please contact the glibc
-maintainers. Start at @url{http://www.gnu.org/software/libc/} and
-read the references there on how to go about getting involved and
-contacting the developers.
-
-Valid cases of @samp{i@var{x}86} include @samp{i386}, @samp{i486},
-@samp{i586}, and @samp{i686}. All of those configurations produce a
-library that can run on this processor and newer processors. The GCC
-compiler by default generates code that's optimized for the machine it's
-configured for and will use the instructions available on that machine.
-For example if your GCC is configured for @samp{i686}, gcc will optimize
-for @samp{i686} and might issue some @samp{i686} specific instructions.
-To generate code for other models, you have to configure for that model
-and give GCC the appropriate @samp{-march=} and @samp{-mcpu=} compiler
-switches via @var{CFLAGS}.
-
@node Linux
@appendixsec Specific advice for GNU/Linux systems
@cindex upgrading from libc5