summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--ChangeLog20
-rw-r--r--Makeconfig10
-rw-r--r--config.make.in2
-rwxr-xr-xconfigure1131
-rw-r--r--configure.in115
-rw-r--r--libidn/ChangeLog4
-rw-r--r--linuxthreads/ChangeLog4
-rw-r--r--nptl/ChangeLog4
-rw-r--r--sysdeps/unix/sysv/linux/bits/in.h9
9 files changed, 500 insertions, 799 deletions
diff --git a/ChangeLog b/ChangeLog
index ed94006a70..7f0430538a 100644
--- a/ChangeLog
+++ b/ChangeLog
@@ -1,3 +1,21 @@
+2004-07-20 Roland McGrath <roland@redhat.com>
+
+ * configure.in (add_ons): Substitute this. Move $add_ons handling
+ after AC_CANONICAL_HOST and default setting of $machine et al.
+ Don't set $subdirs from $add_ons.
+ Instead, source add-on/configure fragments early on.
+ (base_machine): If it's already set, don't set it based on $machine.
+ (libc_config_ok): New variable, set to no. If an add-on fragment sets
+ it to yes, skip the tuple sanity check as if --enable-hacker-mode.
+ (sysnames): Try appending add-on names after machine as well.
+ * configure: Regenerated.
+ * config.make.in (add-ons): Set from @add_ons@ instead of @subdirs@.
+ * Makeconfig ($(common-objpfx)config.status): Also depend on configure
+ files in $(add_ons) dirs.
+
+ * sysdeps/unix/sysv/linux/bits/in.h (struct ip_mreq): Remove
+ definition, now in netinet/in.h proper.
+
2004-07-20 Alexandre Oliva <aoliva@redhat.com>
* sysdeps/unix/sysv/linux/mips/Makefile ($(objpfx)syscall-%.h):
@@ -136,7 +154,7 @@
[BZ #266]
* manual/string.texi (l64a): Note that the static buffer is 7 bytes
- long. Rewrite example code so that it takes account l64a output
+ long. Rewrite example code so that it takes into account l64a output
shorter than 6 characters.
Reported by Julian Graham <julian.graham@aya.yale.edu>.
diff --git a/Makeconfig b/Makeconfig
index 92501a78c0..0b8502192e 100644
--- a/Makeconfig
+++ b/Makeconfig
@@ -110,15 +110,19 @@ $(common-objpfx)config.make: $(common-objpfx)config.status \
$(..)config.make.in $(..)config.h.in
cd $(<D); $(SHELL) $(<F)
-# Find all the sysdeps configure fragments, to make sure we re-run
-# configure when any of them changes.
+# Find all the add-on and sysdeps configure fragments, to make sure we
+# re-run configure when any of them changes.
$(common-objpfx)config.status: $(..)version.h $(..)configure \
$(foreach dir,$(full_config_sysdirs),\
$(wildcard \
$(dir)/Implies) \
$(patsubst %.in,%,\
$(firstword $(wildcard \
- $(addprefix $(dir)/,configure configure.in)))))
+ $(addprefix $(dir)/,configure configure.in))))) \
+ $(patsubst %.in,%,\
+ $(foreach dir,$(add_ons),\
+ $(firstword $(wildcard \
+ $(addprefix $(..)$(dir)/,configure configure.in)))))
@cd $(@D); if test -f $(@F); then exec $(SHELL) $(@F) --recheck; else \
echo The GNU C library has not been configured. >&2; \
echo Run \`configure\' to configure it before building. >&2; \
diff --git a/config.make.in b/config.make.in
index dd3aa8fe8a..b48dbb4fc5 100644
--- a/config.make.in
+++ b/config.make.in
@@ -87,7 +87,7 @@ build-profile = @profile@
build-omitfp = @omitfp@
build-bounded = @bounded@
build-static-nss = @static_nss@
-add-ons = @subdirs@
+add-ons = @add_ons@
cross-compiling = @cross_compiling@
force-install = @force_install@
diff --git a/configure b/configure
index c593cfea40..997c8d4b8c 100755
--- a/configure
+++ b/configure
@@ -1,11 +1,12 @@
#! /bin/sh
# From configure.in CVSid.
# Guess values for system-dependent variables and create Makefiles.
-# Generated by GNU Autoconf 2.59 for GNU C Library (see version.h).
+# Generated by GNU Autoconf 2.57 for GNU C Library (see version.h).
#
# Report bugs to <glibc>.
#
-# Copyright (C) 2003 Free Software Foundation, Inc.
+# Copyright 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, 2002
+# Free Software Foundation, Inc.
# This configure script is free software; the Free Software Foundation
# gives unlimited permission to copy, distribute and modify it.
## --------------------- ##
@@ -22,10 +23,9 @@ if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then
set -o posix
fi
-DUALCASE=1; export DUALCASE # for MKS sh
# Support unset when possible.
-if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
+if (FOO=FOO; unset FOO) >/dev/null 2>&1; then
as_unset=unset
else
as_unset=false
@@ -44,7 +44,7 @@ for as_var in \
LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \
LC_TELEPHONE LC_TIME
do
- if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then
+ if (set +x; test -n "`(eval $as_var=C; export $as_var) 2>&1`"); then
eval $as_var=C; export $as_var
else
$as_unset $as_var
@@ -221,17 +221,16 @@ rm -f conf$$ conf$$.exe conf$$.file
if mkdir -p . 2>/dev/null; then
as_mkdir_p=:
else
- test -d ./-p && rmdir ./-p
as_mkdir_p=false
fi
as_executable_p="test -f"
# Sed expression to map a string onto a valid CPP name.
-as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
+as_tr_cpp="sed y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g"
# Sed expression to map a string onto a valid variable name.
-as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
+as_tr_sh="sed y%*+%pp%;s%[^_$as_cr_alnum]%_%g"
# IFS
@@ -313,7 +312,7 @@ ac_includes_default="\
# include <unistd.h>
#endif"
-ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS with_fp with_cvs enable_check_abi oldest_abi bindnow subdirs force_install all_warnings build build_cpu build_vendor build_os host host_cpu host_vendor host_os base_machine sysnames INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA LN_S CC CFLAGS LDFLAGS CPPFLAGS ac_ct_CC OBJEXT BUILD_CC cross_compiling CPP CXX CXXFLAGS ac_ct_CXX AR OBJDUMP RANLIB ac_ct_RANLIB MIG AS LD PWD_P MAKE MSGFMT MAKEINFO SED AUTOCONF SYSINCLUDES libc_cv_gcc_static_libgcc BASH libc_cv_have_bash2 KSH libc_cv_have_ksh AWK PERL INSTALL_INFO BISON VERSIONING libc_cv_asm_protected_directive libc_cv_initfinit_array libc_cv_cc_with_libunwind libc_cv_z_nodelete libc_cv_z_nodlopen libc_cv_z_initfirst libc_cv_z_relro libc_cv_Bgroup libc_cv_libgcc_s_suffix libc_cv_as_needed ASFLAGS_config libc_cv_z_combreloc libc_cv_z_execstack libc_cv_fpie fno_unit_at_a_time libc_cv_have_initfini libc_cv_cpp_asm_debuginfo no_whole_archive exceptions LIBGD EGREP sizeof_long_double libc_cv_gcc_unwind_find_fde uname_sysname uname_release uname_version old_glibc_headers libc_cv_slibdir libc_cv_localedir libc_cv_sysconfdir libc_cv_rootsbindir libc_cv_forced_unwind use_ldconfig ldd_rewrite_script gnu_ld gnu_as elf xcoff static shared pic_default profile omitfp bounded static_nss nopic_initfini DEFINES linux_doors mach_interface_list VERSION RELEASE LIBOBJS LTLIBOBJS'
+ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS with_fp with_cvs enable_check_abi oldest_abi bindnow force_install all_warnings build build_cpu build_vendor build_os host host_cpu host_vendor host_os subdirs add_ons base_machine sysnames INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA LN_S CC CFLAGS LDFLAGS CPPFLAGS ac_ct_CC OBJEXT BUILD_CC cross_compiling CPP CXX CXXFLAGS ac_ct_CXX AR OBJDUMP RANLIB ac_ct_RANLIB MIG AS LD PWD_P MAKE MSGFMT MAKEINFO SED AUTOCONF SYSINCLUDES libc_cv_gcc_static_libgcc BASH libc_cv_have_bash2 KSH libc_cv_have_ksh AWK PERL INSTALL_INFO BISON VERSIONING libc_cv_asm_protected_directive libc_cv_initfinit_array libc_cv_cc_with_libunwind libc_cv_z_nodelete libc_cv_z_nodlopen libc_cv_z_initfirst libc_cv_z_relro libc_cv_Bgroup libc_cv_libgcc_s_suffix libc_cv_as_needed ASFLAGS_config libc_cv_z_combreloc libc_cv_z_execstack libc_cv_fpie fno_unit_at_a_time libc_cv_have_initfini libc_cv_cpp_asm_debuginfo no_whole_archive exceptions LIBGD EGREP sizeof_long_double libc_cv_gcc_unwind_find_fde uname_sysname uname_release uname_version old_glibc_headers libc_cv_slibdir libc_cv_localedir libc_cv_sysconfdir libc_cv_rootsbindir libc_cv_forced_unwind use_ldconfig ldd_rewrite_script gnu_ld gnu_as elf xcoff static shared pic_default profile omitfp bounded static_nss nopic_initfini DEFINES linux_doors mach_interface_list VERSION RELEASE LIBOBJS LTLIBOBJS'
ac_subst_files=''
# Initialize some variables set by options.
@@ -672,7 +671,7 @@ done
# Be sure to have absolute paths.
for ac_var in bindir sbindir libexecdir datadir sysconfdir sharedstatedir \
- localstatedir libdir includedir oldincludedir infodir mandir
+ localstatedir libdir includedir oldincludedir infodir mandir
do
eval ac_val=$`echo $ac_var`
case $ac_val in
@@ -712,10 +711,10 @@ if test -z "$srcdir"; then
# Try the directory containing this script, then its parent.
ac_confdir=`(dirname "$0") 2>/dev/null ||
$as_expr X"$0" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$0" : 'X\(//\)[^/]' \| \
- X"$0" : 'X\(//\)$' \| \
- X"$0" : 'X\(/\)' \| \
- . : '\(.\)' 2>/dev/null ||
+ X"$0" : 'X\(//\)[^/]' \| \
+ X"$0" : 'X\(//\)$' \| \
+ X"$0" : 'X\(/\)' \| \
+ . : '\(.\)' 2>/dev/null ||
echo X"$0" |
sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
/^X\(\/\/\)[^/].*/{ s//\1/; q; }
@@ -815,9 +814,9 @@ _ACEOF
cat <<_ACEOF
Installation directories:
--prefix=PREFIX install architecture-independent files in PREFIX
- [$ac_default_prefix]
+ [$ac_default_prefix]
--exec-prefix=EPREFIX install architecture-dependent files in EPREFIX
- [PREFIX]
+ [PREFIX]
By default, \`make install' will install all the files in
\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify
@@ -951,45 +950,12 @@ case $srcdir in
ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
ac_top_srcdir=$ac_top_builddir$srcdir ;;
esac
-
-# Do not use `cd foo && pwd` to compute absolute paths, because
-# the directories may not exist.
-case `pwd` in
-.) ac_abs_builddir="$ac_dir";;
-*)
- case "$ac_dir" in
- .) ac_abs_builddir=`pwd`;;
- [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";;
- *) ac_abs_builddir=`pwd`/"$ac_dir";;
- esac;;
-esac
-case $ac_abs_builddir in
-.) ac_abs_top_builddir=${ac_top_builddir}.;;
-*)
- case ${ac_top_builddir}. in
- .) ac_abs_top_builddir=$ac_abs_builddir;;
- [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;;
- *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;;
- esac;;
-esac
-case $ac_abs_builddir in
-.) ac_abs_srcdir=$ac_srcdir;;
-*)
- case $ac_srcdir in
- .) ac_abs_srcdir=$ac_abs_builddir;;
- [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;;
- *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;;
- esac;;
-esac
-case $ac_abs_builddir in
-.) ac_abs_top_srcdir=$ac_top_srcdir;;
-*)
- case $ac_top_srcdir in
- .) ac_abs_top_srcdir=$ac_abs_builddir;;
- [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;;
- *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;;
- esac;;
-esac
+# Don't blindly perform a `cd "$ac_dir"/$ac_foo && pwd` since $ac_foo can be
+# absolute.
+ac_abs_builddir=`cd "$ac_dir" && cd $ac_builddir && pwd`
+ac_abs_top_builddir=`cd "$ac_dir" && cd ${ac_top_builddir}. && pwd`
+ac_abs_srcdir=`cd "$ac_dir" && cd $ac_srcdir && pwd`
+ac_abs_top_srcdir=`cd "$ac_dir" && cd $ac_top_srcdir && pwd`
cd $ac_dir
# Check for guested configure; otherwise get Cygnus style configure.
@@ -1000,7 +966,7 @@ esac
echo
$SHELL $ac_srcdir/configure --help=recursive
elif test -f $ac_srcdir/configure.ac ||
- test -f $ac_srcdir/configure.in; then
+ test -f $ac_srcdir/configure.in; then
echo
$ac_configure --help
else
@@ -1014,9 +980,10 @@ test -n "$ac_init_help" && exit 0
if $ac_init_version; then
cat <<\_ACEOF
GNU C Library configure (see version.h)
-generated by GNU Autoconf 2.59
+generated by GNU Autoconf 2.57
-Copyright (C) 2003 Free Software Foundation, Inc.
+Copyright 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, 2002
+Free Software Foundation, Inc.
This configure script is free software; the Free Software Foundation
gives unlimited permission to copy, distribute and modify it.
_ACEOF
@@ -1028,7 +995,7 @@ This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
It was created by GNU C Library $as_me (see version.h), which was
-generated by GNU Autoconf 2.59. Invocation command line was
+generated by GNU Autoconf 2.57. Invocation command line was
$ $0 $@
@@ -1105,19 +1072,19 @@ do
2)
ac_configure_args1="$ac_configure_args1 '$ac_arg'"
if test $ac_must_keep_next = true; then
- ac_must_keep_next=false # Got value, back to normal.
+ ac_must_keep_next=false # Got value, back to normal.
else
- case $ac_arg in
- *=* | --config-cache | -C | -disable-* | --disable-* \
- | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \
- | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \
- | -with-* | --with-* | -without-* | --without-* | --x)
- case "$ac_configure_args0 " in
- "$ac_configure_args1"*" '$ac_arg' "* ) continue ;;
- esac
- ;;
- -* ) ac_must_keep_next=true ;;
- esac
+ case $ac_arg in
+ *=* | --config-cache | -C | -disable-* | --disable-* \
+ | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \
+ | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \
+ | -with-* | --with-* | -without-* | --without-* | --x)
+ case "$ac_configure_args0 " in
+ "$ac_configure_args1"*" '$ac_arg' "* ) continue ;;
+ esac
+ ;;
+ -* ) ac_must_keep_next=true ;;
+ esac
fi
ac_configure_args="$ac_configure_args$ac_sep'$ac_arg'"
# Get rid of the leading space.
@@ -1151,12 +1118,12 @@ _ASBOX
case `(ac_space='"'"' '"'"'; set | grep ac_space) 2>&1` in
*ac_space=\ *)
sed -n \
- "s/'"'"'/'"'"'\\\\'"'"''"'"'/g;
- s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='"'"'\\2'"'"'/p"
+ "s/'"'"'/'"'"'\\\\'"'"''"'"'/g;
+ s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='"'"'\\2'"'"'/p"
;;
*)
sed -n \
- "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p"
+ "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p"
;;
esac;
}
@@ -1185,7 +1152,7 @@ _ASBOX
for ac_var in $ac_subst_files
do
eval ac_val=$`echo $ac_var`
- echo "$ac_var='"'"'$ac_val'"'"'"
+ echo "$ac_var='"'"'$ac_val'"'"'"
done | sort
echo
fi
@@ -1204,7 +1171,7 @@ _ASBOX
echo "$as_me: caught signal $ac_signal"
echo "$as_me: exit $exit_status"
} >&5
- rm -f core *.core &&
+ rm -f core core.* *.core &&
rm -rf conftest* confdefs* conf$$* $ac_clean_files &&
exit $exit_status
' 0
@@ -1284,7 +1251,7 @@ fi
# value.
ac_cache_corrupted=false
for ac_var in `(set) 2>&1 |
- sed -n 's/^ac_env_\([a-zA-Z_0-9]*\)_set=.*/\1/p'`; do
+ sed -n 's/^ac_env_\([a-zA-Z_0-9]*\)_set=.*/\1/p'`; do
eval ac_old_set=\$ac_cv_env_${ac_var}_set
eval ac_new_set=\$ac_env_${ac_var}_set
eval ac_old_val="\$ac_cv_env_${ac_var}_value"
@@ -1301,13 +1268,13 @@ echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}
,);;
*)
if test "x$ac_old_val" != "x$ac_new_val"; then
- { echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5
+ { echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5
echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}
- { echo "$as_me:$LINENO: former value: $ac_old_val" >&5
+ { echo "$as_me:$LINENO: former value: $ac_old_val" >&5
echo "$as_me: former value: $ac_old_val" >&2;}
- { echo "$as_me:$LINENO: current value: $ac_new_val" >&5
+ { echo "$as_me:$LINENO: current value: $ac_new_val" >&5
echo "$as_me: current value: $ac_new_val" >&2;}
- ac_cache_corrupted=:
+ ac_cache_corrupted=:
fi;;
esac
# Pass precious variables to config.status.
@@ -1641,51 +1608,6 @@ else
fi;
-
-
-subdirs="$subdirs "
-add_ons_pfx=
-if test x"$add_ons" != x; then
- for f in $add_ons; do
- # Some sanity checks
- if test "$f" = "crypt"; then
- { { echo "$as_me:$LINENO: error:
-*** It seems that you're using an old \`crypt' add-on. crypt is now
-*** part of glibc and using the old add-on will not work with this
-*** release. Start again with fresh sources and without the old
-*** \`crypt' add-on." >&5
-echo "$as_me: error:
-*** It seems that you're using an old \`crypt' add-on. crypt is now
-*** part of glibc and using the old add-on will not work with this
-*** release. Start again with fresh sources and without the old
-*** \`crypt' add-on." >&2;}
- { (exit 1); exit 1; }; }
- fi
- if test "$f" = "localedata"; then
- { { echo "$as_me:$LINENO: error:
-*** It seems that you're using an old \`localedata' add-on. localedata
-*** is now part of glibc and using the old add-on will not work with
-*** this release. Start again with fresh sources and without the old
-*** \`localedata' add-on." >&5
-echo "$as_me: error:
-*** It seems that you're using an old \`localedata' add-on. localedata
-*** is now part of glibc and using the old add-on will not work with
-*** this release. Start again with fresh sources and without the old
-*** \`localedata' add-on." >&2;}
- { (exit 1); exit 1; }; }
- fi
- # Test whether such a subdir really exists.
- if test -d $srcdir/$f; then
- add_ons_pfx="$add_ons_pfx $f/"
- subdirs="$subdirs $f"
- else
- { { echo "$as_me:$LINENO: error: add-on directory \"$f\" does not exist" >&5
-echo "$as_me: error: add-on directory \"$f\" does not exist" >&2;}
- { (exit 1); exit 1; }; }
- fi
- done
-fi
-
# Check whether --enable-static-nss or --disable-static-nss was given.
if test "${enable_static_nss+set}" = set; then
enableval="$enable_static_nss"
@@ -1829,6 +1751,9 @@ aix*)
;;
esac
+# The configure fragment of an add-on port can modify these to supplement
+# or override the table in the case statement below. No fragment should
+# ever change the config_* variables, however.
machine=$config_machine
vendor=$config_vendor
os=$config_os
@@ -1846,6 +1771,75 @@ case "$machine-$host_os" in
;;
esac
+
+# An add-on can set this when it the tuple to disable the sanity check below.
+libc_config_ok=no
+
+
+
+subdirs="$subdirs "
+
+
+add_ons_sfx=
+add_ons_pfx=
+if test x"$add_ons" != x; then
+ for f in $add_ons; do
+ # Some sanity checks
+ case "$f" in
+ crypt)
+ { { echo "$as_me:$LINENO: error:
+*** It seems that you're using an old \`crypt' add-on. crypt is now
+*** part of glibc and using the old add-on will not work with this
+*** release. Start again with fresh sources and without the old
+*** \`crypt' add-on." >&5
+echo "$as_me: error:
+*** It seems that you're using an old \`crypt' add-on. crypt is now
+*** part of glibc and using the old add-on will not work with this
+*** release. Start again with fresh sources and without the old
+*** \`crypt' add-on." >&2;}
+ { (exit 1); exit 1; }; }
+ ;;
+ localedata)
+ { { echo "$as_me:$LINENO: error:
+*** It seems that you're using an old \`localedata' add-on. localedata
+*** is now part of glibc and using the old add-on will not work with
+*** this release. Start again with fresh sources and without the old
+*** \`localedata' add-on." >&5
+echo "$as_me: error:
+*** It seems that you're using an old \`localedata' add-on. localedata
+*** is now part of glibc and using the old add-on will not work with
+*** this release. Start again with fresh sources and without the old
+*** \`localedata' add-on." >&2;}
+ { (exit 1); exit 1; }; }
+ ;;
+ esac
+
+ # Test whether such a subdir really exists.
+ if test -d $srcdir/$f; then
+ add_ons_pfx="$add_ons_pfx $f/"
+ add_ons_sfx="$add_ons_sfx /$f"
+ else
+ { { echo "$as_me:$LINENO: error: add-on directory \"$f\" does not exist" >&5
+echo "$as_me: error: add-on directory \"$f\" does not exist" >&2;}
+ { (exit 1); exit 1; }; }
+ fi
+ done
+
+ for f in $add_ons; do
+ frag=$srcdir/$f/configure
+ if test -r $frag; then
+ echo "$as_me:$LINENO: result: running configure fragment for add-on $f" >&5
+echo "${ECHO_T}running configure fragment for add-on $f" >&6
+ . $frag
+ else
+ { echo "$as_me:$LINENO: WARNING: add-on fragment $frag missing" >&5
+echo "$as_me: WARNING: add-on fragment $frag missing" >&2;}
+ fi
+ done
+fi
+
+
+
###
### I put this here to prevent those annoying emails from people who cannot
### read and try to compile glibc on unsupported platforms. --drepper
@@ -1854,7 +1848,7 @@ esac
### one can skip this test to make the configuration not fail for unsupported
### platforms.
###
-if test -z "$enable_hacker_mode"; then
+if test -z "$enable_hacker_mode" && test x"$libc_config_ok" != xyes; then
case "$machine-$host_os" in
*-linux* | *-gnu* | arm*-none* | powerpc-aix4.3.*)
;;
@@ -1871,8 +1865,9 @@ if test -z "$enable_hacker_mode"; then
fi
# Expand the configuration machine name into a subdirectory by architecture
-# type and particular chip.
-case "$machine" in
+# type and particular chip. If an add-on configure fragment already set
+# base_machine, we don't change it.
+test -n "$base_machine" || case "$machine" in
a29k | am29000) base_machine=a29k machine=a29k ;;
alpha*) base_machine=alpha machine=alpha/$machine ;;
arm*) base_machine=arm machine=arm/arm32/$machine ;;
@@ -2027,16 +2022,18 @@ for d in $add_ons_pfx ''; do
for o in /$ostry ''; do
test "$o" = / && continue
for m in $mach ''; do
- if test "$m0$b$v$o$m"; then
- try="${d}sysdeps$m0$b$v$o$m"
- test -n "$enable_debug_configure" &&
- echo "$0 DEBUG: try $try" >&2
- if test -d $srcdir/$try; then
- sysnames="$sysnames $try"
- { test -n "$o" || test -n "$b"; } && os_used=t
- { test -n "$m" || test -n "$m0"; } && machine_used=t
+ for a in $add_ons_sfx ''; do
+ if test "$m0$b$v$o$m"; then
+ try="${d}sysdeps$m0$b$v$o$m$a"
+ test -n "$enable_debug_configure" &&
+ echo "$0 DEBUG: try $try" >&2
+ if test -d $srcdir/$try; then
+ sysnames="$sysnames $try"
+ { test -n "$o" || test -n "$b"; } && os_used=t
+ { test -n "$m" || test -n "$m0"; } && machine_used=t
+ fi
fi
- fi
+ done
done
done
done
@@ -2177,7 +2174,6 @@ echo "${ECHO_T}$default_sysnames" >&6
# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
# AFS /usr/afsws/bin/install, which mishandles nonexistent args
# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-# OS/2's system install, which has a completely different semantic
# ./install, which can be erroneously created by make from ./install.sh.
echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5
echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6
@@ -2194,7 +2190,6 @@ do
case $as_dir/ in
./ | .// | /cC/* | \
/etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \
- ?:\\/os2\\/install\\/* | ?:\\/OS2\\/INSTALL\\/* | \
/usr/ucb/* ) ;;
*)
# OSF1 and SCO ODT 3.0 have their own names for install.
@@ -2202,20 +2197,20 @@ case $as_dir/ in
# by default.
for ac_prog in ginstall scoinst install; do
for ac_exec_ext in '' $ac_executable_extensions; do
- if $as_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then
- if test $ac_prog = install &&
- grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
- # AIX install. It has an incompatible calling convention.
- :
- elif test $ac_prog = install &&
- grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
- # program-specific install script used by HP pwplus--don't use.
- :
- else
- ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c"
- break 3
- fi
- fi
+ if $as_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then
+ if test $ac_prog = install &&
+ grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
+ # AIX install. It has an incompatible calling convention.
+ :
+ elif test $ac_prog = install &&
+ grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
+ # program-specific install script used by HP pwplus--don't use.
+ :
+ else
+ ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c"
+ break 3
+ fi
+ fi
done
done
;;
@@ -2603,6 +2598,7 @@ if test "${ac_cv_objext+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
cat >conftest.$ac_ext <<_ACEOF
+#line $LINENO "configure"
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
@@ -2653,6 +2649,7 @@ if test "${ac_cv_c_compiler_gnu+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
cat >conftest.$ac_ext <<_ACEOF
+#line $LINENO "configure"
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
@@ -2672,21 +2669,11 @@ main ()
_ACEOF
rm -f conftest.$ac_objext
if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>conftest.er1
+ (eval $ac_compile) 2>&5
ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
+ { ac_try='test -s conftest.$ac_objext'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
@@ -2699,7 +2686,7 @@ sed 's/^/| /' conftest.$ac_ext >&5
ac_compiler_gnu=no
fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+rm -f conftest.$ac_objext conftest.$ac_ext
ac_cv_c_compiler_gnu=$ac_compiler_gnu
fi
@@ -2715,6 +2702,7 @@ if test "${ac_cv_prog_cc_g+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
cat >conftest.$ac_ext <<_ACEOF
+#line $LINENO "configure"
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
@@ -2731,21 +2719,11 @@ main ()
_ACEOF
rm -f conftest.$ac_objext
if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>conftest.er1
+ (eval $ac_compile) 2>&5
ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
+ { ac_try='test -s conftest.$ac_objext'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
@@ -2758,7 +2736,7 @@ sed 's/^/| /' conftest.$ac_ext >&5
ac_cv_prog_cc_g=no
fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+rm -f conftest.$ac_objext conftest.$ac_ext
fi
echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5
echo "${ECHO_T}$ac_cv_prog_cc_g" >&6
@@ -2785,6 +2763,7 @@ else
ac_cv_prog_cc_stdc=no
ac_save_CC=$CC
cat >conftest.$ac_ext <<_ACEOF
+#line $LINENO "configure"
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
@@ -2812,16 +2791,6 @@ static char *f (char * (*g) (char **, int), char **p, ...)
va_end (v);
return s;
}
-
-/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has
- function prototypes and stuff, but not '\xHH' hex character constants.
- These don't provoke an error unfortunately, instead are silently treated
- as 'x'. The following induces an error, until -std1 is added to get
- proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an
- array size at least. It's necessary to write '\x00'==0 to get something
- that's true only with -std1. */
-int osf4_cc_array ['\x00' == 0 ? 1 : -1];
-
int test (int i, double x);
struct s1 {int (*f) (int a);};
struct s2 {int (*f) (double a);};
@@ -2848,21 +2817,11 @@ do
CC="$ac_save_CC $ac_arg"
rm -f conftest.$ac_objext
if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>conftest.er1
+ (eval $ac_compile) 2>&5
ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
+ { ac_try='test -s conftest.$ac_objext'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
@@ -2875,7 +2834,7 @@ else
sed 's/^/| /' conftest.$ac_ext >&5
fi
-rm -f conftest.err conftest.$ac_objext
+rm -f conftest.$ac_objext
done
rm -f conftest.$ac_ext conftest.$ac_objext
CC=$ac_save_CC
@@ -2903,28 +2862,19 @@ cat >conftest.$ac_ext <<_ACEOF
_ACEOF
rm -f conftest.$ac_objext
if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>conftest.er1
+ (eval $ac_compile) 2>&5
ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
+ { ac_try='test -s conftest.$ac_objext'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); }; }; then
for ac_declaration in \
- '' \
+ ''\
+ '#include <stdlib.h>' \
'extern "C" void std::exit (int) throw (); using std::exit;' \
'extern "C" void std::exit (int); using std::exit;' \
'extern "C" void exit (int) throw ();' \
@@ -2932,13 +2882,14 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
'void exit (int);'
do
cat >conftest.$ac_ext <<_ACEOF
+#line $LINENO "configure"
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
-$ac_declaration
#include <stdlib.h>
+$ac_declaration
int
main ()
{
@@ -2949,21 +2900,11 @@ exit (42);
_ACEOF
rm -f conftest.$ac_objext
if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>conftest.er1
+ (eval $ac_compile) 2>&5
ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
+ { ac_try='test -s conftest.$ac_objext'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
@@ -2976,8 +2917,9 @@ sed 's/^/| /' conftest.$ac_ext >&5
continue
fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+rm -f conftest.$ac_objext conftest.$ac_ext
cat >conftest.$ac_ext <<_ACEOF
+#line $LINENO "configure"
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
@@ -2994,21 +2936,11 @@ exit (42);
_ACEOF
rm -f conftest.$ac_objext
if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>conftest.er1
+ (eval $ac_compile) 2>&5
ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
+ { ac_try='test -s conftest.$ac_objext'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
@@ -3020,7 +2952,7 @@ else
sed 's/^/| /' conftest.$ac_ext >&5
fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+rm -f conftest.$ac_objext conftest.$ac_ext
done
rm -f conftest*
if test -n "$ac_declaration"; then
@@ -3034,7 +2966,7 @@ else
sed 's/^/| /' conftest.$ac_ext >&5
fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+rm -f conftest.$ac_objext conftest.$ac_ext
ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
@@ -3112,6 +3044,7 @@ do
# On the NeXT, cc -E runs the code through the compiler's parser,
# not just through cpp. "Syntax error" is here to catch this case.
cat >conftest.$ac_ext <<_ACEOF
+#line $LINENO "configure"
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
@@ -3122,7 +3055,7 @@ cat >>conftest.$ac_ext <<_ACEOF
#else
# include <assert.h>
#endif
- Syntax error
+ Syntax error
_ACEOF
if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
(eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
@@ -3134,7 +3067,6 @@ if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
(exit $ac_status); } >/dev/null; then
if test -s conftest.err; then
ac_cpp_err=$ac_c_preproc_warn_flag
- ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
else
ac_cpp_err=
fi
@@ -3155,6 +3087,7 @@ rm -f conftest.err conftest.$ac_ext
# OK, works on sane cases. Now check whether non-existent headers
# can be detected and how.
cat >conftest.$ac_ext <<_ACEOF
+#line $LINENO "configure"
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
@@ -3172,7 +3105,6 @@ if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
(exit $ac_status); } >/dev/null; then
if test -s conftest.err; then
ac_cpp_err=$ac_c_preproc_warn_flag
- ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
else
ac_cpp_err=
fi
@@ -3219,6 +3151,7 @@ do
# On the NeXT, cc -E runs the code through the compiler's parser,
# not just through cpp. "Syntax error" is here to catch this case.
cat >conftest.$ac_ext <<_ACEOF
+#line $LINENO "configure"
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
@@ -3229,7 +3162,7 @@ cat >>conftest.$ac_ext <<_ACEOF
#else
# include <assert.h>
#endif
- Syntax error
+ Syntax error
_ACEOF
if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
(eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
@@ -3241,7 +3174,6 @@ if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
(exit $ac_status); } >/dev/null; then
if test -s conftest.err; then
ac_cpp_err=$ac_c_preproc_warn_flag
- ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
else
ac_cpp_err=
fi
@@ -3262,6 +3194,7 @@ rm -f conftest.err conftest.$ac_ext
# OK, works on sane cases. Now check whether non-existent headers
# can be detected and how.
cat >conftest.$ac_ext <<_ACEOF
+#line $LINENO "configure"
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
@@ -3279,7 +3212,6 @@ if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
(exit $ac_status); } >/dev/null; then
if test -s conftest.err; then
ac_cpp_err=$ac_c_preproc_warn_flag
- ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
else
ac_cpp_err=
fi
@@ -3438,6 +3370,7 @@ if test "${ac_cv_cxx_compiler_gnu+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
cat >conftest.$ac_ext <<_ACEOF
+#line $LINENO "configure"
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
@@ -3457,21 +3390,11 @@ main ()
_ACEOF
rm -f conftest.$ac_objext
if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>conftest.er1
+ (eval $ac_compile) 2>&5
ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_cxx_werror_flag"
- || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
+ { ac_try='test -s conftest.$ac_objext'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
@@ -3484,7 +3407,7 @@ sed 's/^/| /' conftest.$ac_ext >&5
ac_compiler_gnu=no
fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+rm -f conftest.$ac_objext conftest.$ac_ext
ac_cv_cxx_compiler_gnu=$ac_compiler_gnu
fi
@@ -3500,6 +3423,7 @@ if test "${ac_cv_prog_cxx_g+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
cat >conftest.$ac_ext <<_ACEOF
+#line $LINENO "configure"
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
@@ -3516,21 +3440,11 @@ main ()
_ACEOF
rm -f conftest.$ac_objext
if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>conftest.er1
+ (eval $ac_compile) 2>&5
ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_cxx_werror_flag"
- || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
+ { ac_try='test -s conftest.$ac_objext'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
@@ -3543,7 +3457,7 @@ sed 's/^/| /' conftest.$ac_ext >&5
ac_cv_prog_cxx_g=no
fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+rm -f conftest.$ac_objext conftest.$ac_ext
fi
echo "$as_me:$LINENO: result: $ac_cv_prog_cxx_g" >&5
echo "${ECHO_T}$ac_cv_prog_cxx_g" >&6
@@ -3563,7 +3477,8 @@ else
fi
fi
for ac_declaration in \
- '' \
+ ''\
+ '#include <stdlib.h>' \
'extern "C" void std::exit (int) throw (); using std::exit;' \
'extern "C" void std::exit (int); using std::exit;' \
'extern "C" void exit (int) throw ();' \
@@ -3571,13 +3486,14 @@ for ac_declaration in \
'void exit (int);'
do
cat >conftest.$ac_ext <<_ACEOF
+#line $LINENO "configure"
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
-$ac_declaration
#include <stdlib.h>
+$ac_declaration
int
main ()
{
@@ -3588,21 +3504,11 @@ exit (42);
_ACEOF
rm -f conftest.$ac_objext
if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>conftest.er1
+ (eval $ac_compile) 2>&5
ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_cxx_werror_flag"
- || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
+ { ac_try='test -s conftest.$ac_objext'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
@@ -3615,8 +3521,9 @@ sed 's/^/| /' conftest.$ac_ext >&5
continue
fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+rm -f conftest.$ac_objext conftest.$ac_ext
cat >conftest.$ac_ext <<_ACEOF
+#line $LINENO "configure"
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
@@ -3633,21 +3540,11 @@ exit (42);
_ACEOF
rm -f conftest.$ac_objext
if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>conftest.er1
+ (eval $ac_compile) 2>&5
ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_cxx_werror_flag"
- || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
+ { ac_try='test -s conftest.$ac_objext'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
@@ -3659,7 +3556,7 @@ else
sed 's/^/| /' conftest.$ac_ext >&5
fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+rm -f conftest.$ac_objext conftest.$ac_ext
done
rm -f conftest*
if test -n "$ac_declaration"; then
@@ -4765,6 +4662,7 @@ if test "${libc_cv_friendly_stddef+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
cat >conftest.$ac_ext <<_ACEOF
+#line $LINENO "configure"
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
@@ -4789,21 +4687,11 @@ if (&size == NULL || &wchar == NULL) abort ();
_ACEOF
rm -f conftest.$ac_objext
if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>conftest.er1
+ (eval $ac_compile) 2>&5
ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
+ { ac_try='test -s conftest.$ac_objext'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
@@ -4816,7 +4704,7 @@ sed 's/^/| /' conftest.$ac_ext >&5
libc_cv_friendly_stddef=no
fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+rm -f conftest.$ac_objext conftest.$ac_ext
fi
echo "$as_me:$LINENO: result: $libc_cv_friendly_stddef" >&5
echo "${ECHO_T}$libc_cv_friendly_stddef" >&6
@@ -5358,6 +5246,7 @@ if test "${libc_cv_cc_with_libunwind+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
cat >conftest.$ac_ext <<_ACEOF
+#line $LINENO "configure"
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
@@ -5378,21 +5267,11 @@ main ()
_ACEOF
rm -f conftest.$ac_objext conftest$ac_exeext
if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
- (eval $ac_link) 2>conftest.er1
+ (eval $ac_link) 2>&5
ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest$ac_exeext'
+ { ac_try='test -s conftest$ac_exeext'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
@@ -5405,8 +5284,7 @@ sed 's/^/| /' conftest.$ac_ext >&5
libc_cv_cc_with_libunwind=no
fi
-rm -f conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
+rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
fi
echo "$as_me:$LINENO: result: $libc_cv_cc_with_libunwind" >&5
echo "${ECHO_T}$libc_cv_cc_with_libunwind" >&6
@@ -5773,6 +5651,7 @@ if test "${libc_cv_have_initfini+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
cat >conftest.$ac_ext <<_ACEOF
+#line $LINENO "configure"
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
@@ -5791,21 +5670,11 @@ asm (".section .init");
_ACEOF
rm -f conftest.$ac_objext
if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>conftest.er1
+ (eval $ac_compile) 2>&5
ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
+ { ac_try='test -s conftest.$ac_objext'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
@@ -5818,7 +5687,7 @@ sed 's/^/| /' conftest.$ac_ext >&5
libc_cv_have_initfini=no
fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+rm -f conftest.$ac_objext conftest.$ac_ext
fi
echo "$as_me:$LINENO: result: $libc_cv_have_initfini" >&5
echo "${ECHO_T}$libc_cv_have_initfini" >&6
@@ -5874,6 +5743,7 @@ if test "${libc_cv_asm_underscores+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
cat >conftest.$ac_ext <<_ACEOF
+#line $LINENO "configure"
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
@@ -5890,21 +5760,11 @@ glibc_foobar ();
_ACEOF
rm -f conftest.$ac_objext conftest$ac_exeext
if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
- (eval $ac_link) 2>conftest.er1
+ (eval $ac_link) 2>&5
ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest$ac_exeext'
+ { ac_try='test -s conftest$ac_exeext'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
@@ -5917,8 +5777,7 @@ sed 's/^/| /' conftest.$ac_ext >&5
libc_cv_asm_underscores=no
fi
-rm -f conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
+rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
fi
echo "$as_me:$LINENO: result: $libc_cv_asm_underscores" >&5
echo "${ECHO_T}$libc_cv_asm_underscores" >&6
@@ -6238,6 +6097,7 @@ if test "${libc_cv_c_asmcr0_bug+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
cat >conftest.$ac_ext <<_ACEOF
+#line $LINENO "configure"
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
@@ -6254,21 +6114,11 @@ main ()
_ACEOF
rm -f conftest.$ac_objext
if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>conftest.er1
+ (eval $ac_compile) 2>&5
ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
+ { ac_try='test -s conftest.$ac_objext'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
@@ -6281,7 +6131,7 @@ sed 's/^/| /' conftest.$ac_ext >&5
libc_cv_c_asmcr0_bug='yes'
fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+rm -f conftest.$ac_objext conftest.$ac_ext
fi
echo "$as_me:$LINENO: result: $libc_cv_c_asmcr0_bug" >&5
echo "${ECHO_T}$libc_cv_c_asmcr0_bug" >&6
@@ -6605,6 +6455,7 @@ if test "$with_gd" != "no"; then
old_LIBS="$LIBS"
LIBS="$LIBS -lgd -lpng -lz -lm"
cat >conftest.$ac_ext <<_ACEOF
+#line $LINENO "configure"
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
@@ -6621,21 +6472,11 @@ gdImagePng (0, 0)
_ACEOF
rm -f conftest.$ac_objext conftest$ac_exeext
if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
- (eval $ac_link) 2>conftest.er1
+ (eval $ac_link) 2>&5
ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest$ac_exeext'
+ { ac_try='test -s conftest$ac_exeext'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
@@ -6648,8 +6489,7 @@ sed 's/^/| /' conftest.$ac_ext >&5
LIBGD=no
fi
-rm -f conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
+rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
CFLAGS="$old_CFLAGS"
LDFLAGS="$old_LDFLAGS"
LIBS="$old_LIBS"
@@ -6682,6 +6522,7 @@ if test "${ac_cv_header_stdc+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
cat >conftest.$ac_ext <<_ACEOF
+#line $LINENO "configure"
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
@@ -6702,21 +6543,11 @@ main ()
_ACEOF
rm -f conftest.$ac_objext
if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>conftest.er1
+ (eval $ac_compile) 2>&5
ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
+ { ac_try='test -s conftest.$ac_objext'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
@@ -6729,11 +6560,12 @@ sed 's/^/| /' conftest.$ac_ext >&5
ac_cv_header_stdc=no
fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+rm -f conftest.$ac_objext conftest.$ac_ext
if test $ac_cv_header_stdc = yes; then
# SunOS 4.x string.h does not declare mem*, contrary to ANSI.
cat >conftest.$ac_ext <<_ACEOF
+#line $LINENO "configure"
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
@@ -6755,6 +6587,7 @@ fi
if test $ac_cv_header_stdc = yes; then
# ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
cat >conftest.$ac_ext <<_ACEOF
+#line $LINENO "configure"
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
@@ -6779,6 +6612,7 @@ if test $ac_cv_header_stdc = yes; then
:
else
cat >conftest.$ac_ext <<_ACEOF
+#line $LINENO "configure"
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
@@ -6790,9 +6624,9 @@ cat >>conftest.$ac_ext <<_ACEOF
# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
#else
# define ISLOWER(c) \
- (('a' <= (c) && (c) <= 'i') \
- || ('j' <= (c) && (c) <= 'r') \
- || ('s' <= (c) && (c) <= 'z'))
+ (('a' <= (c) && (c) <= 'i') \
+ || ('j' <= (c) && (c) <= 'r') \
+ || ('s' <= (c) && (c) <= 'z'))
# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c))
#endif
@@ -6803,7 +6637,7 @@ main ()
int i;
for (i = 0; i < 256; i++)
if (XOR (islower (i), ISLOWER (i))
- || toupper (i) != TOUPPER (i))
+ || toupper (i) != TOUPPER (i))
exit(2);
exit (0);
}
@@ -6828,7 +6662,7 @@ sed 's/^/| /' conftest.$ac_ext >&5
( exit $ac_status )
ac_cv_header_stdc=no
fi
-rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
+rm -f core core.* *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
fi
fi
fi
@@ -6853,7 +6687,7 @@ fi
for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \
- inttypes.h stdint.h unistd.h
+ inttypes.h stdint.h unistd.h
do
as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
echo "$as_me:$LINENO: checking for $ac_header" >&5
@@ -6862,6 +6696,7 @@ if eval "test \"\${$as_ac_Header+set}\" = set"; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
cat >conftest.$ac_ext <<_ACEOF
+#line $LINENO "configure"
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
@@ -6873,21 +6708,11 @@ $ac_includes_default
_ACEOF
rm -f conftest.$ac_objext
if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>conftest.er1
+ (eval $ac_compile) 2>&5
ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
+ { ac_try='test -s conftest.$ac_objext'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
@@ -6900,7 +6725,7 @@ sed 's/^/| /' conftest.$ac_ext >&5
eval "$as_ac_Header=no"
fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+rm -f conftest.$ac_objext conftest.$ac_ext
fi
echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
@@ -6920,6 +6745,7 @@ if test "${ac_cv_type_long_double+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
cat >conftest.$ac_ext <<_ACEOF
+#line $LINENO "configure"
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
@@ -6939,21 +6765,11 @@ if (sizeof (long double))
_ACEOF
rm -f conftest.$ac_objext
if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>conftest.er1
+ (eval $ac_compile) 2>&5
ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
+ { ac_try='test -s conftest.$ac_objext'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
@@ -6966,7 +6782,7 @@ sed 's/^/| /' conftest.$ac_ext >&5
ac_cv_type_long_double=no
fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+rm -f conftest.$ac_objext conftest.$ac_ext
fi
echo "$as_me:$LINENO: result: $ac_cv_type_long_double" >&5
echo "${ECHO_T}$ac_cv_type_long_double" >&6
@@ -6984,6 +6800,7 @@ else
if test "$cross_compiling" = yes; then
# Depending upon the size, compute the lo and hi bounds.
cat >conftest.$ac_ext <<_ACEOF
+#line $LINENO "configure"
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
@@ -7002,21 +6819,11 @@ test_array [0] = 0
_ACEOF
rm -f conftest.$ac_objext
if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>conftest.er1
+ (eval $ac_compile) 2>&5
ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
+ { ac_try='test -s conftest.$ac_objext'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
@@ -7025,6 +6832,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
ac_lo=0 ac_mid=0
while :; do
cat >conftest.$ac_ext <<_ACEOF
+#line $LINENO "configure"
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
@@ -7043,21 +6851,11 @@ test_array [0] = 0
_ACEOF
rm -f conftest.$ac_objext
if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>conftest.er1
+ (eval $ac_compile) 2>&5
ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
+ { ac_try='test -s conftest.$ac_objext'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
@@ -7069,19 +6867,20 @@ else
sed 's/^/| /' conftest.$ac_ext >&5
ac_lo=`expr $ac_mid + 1`
- if test $ac_lo -le $ac_mid; then
- ac_lo= ac_hi=
- break
- fi
- ac_mid=`expr 2 '*' $ac_mid + 1`
+ if test $ac_lo -le $ac_mid; then
+ ac_lo= ac_hi=
+ break
+ fi
+ ac_mid=`expr 2 '*' $ac_mid + 1`
fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+rm -f conftest.$ac_objext conftest.$ac_ext
done
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
cat >conftest.$ac_ext <<_ACEOF
+#line $LINENO "configure"
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
@@ -7100,21 +6899,11 @@ test_array [0] = 0
_ACEOF
rm -f conftest.$ac_objext
if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>conftest.er1
+ (eval $ac_compile) 2>&5
ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
+ { ac_try='test -s conftest.$ac_objext'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
@@ -7123,6 +6912,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
ac_hi=-1 ac_mid=-1
while :; do
cat >conftest.$ac_ext <<_ACEOF
+#line $LINENO "configure"
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
@@ -7141,21 +6931,11 @@ test_array [0] = 0
_ACEOF
rm -f conftest.$ac_objext
if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>conftest.er1
+ (eval $ac_compile) 2>&5
ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
+ { ac_try='test -s conftest.$ac_objext'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
@@ -7167,13 +6947,13 @@ else
sed 's/^/| /' conftest.$ac_ext >&5
ac_hi=`expr '(' $ac_mid ')' - 1`
- if test $ac_mid -le $ac_hi; then
- ac_lo= ac_hi=
- break
- fi
- ac_mid=`expr 2 '*' $ac_mid`
+ if test $ac_mid -le $ac_hi; then
+ ac_lo= ac_hi=
+ break
+ fi
+ ac_mid=`expr 2 '*' $ac_mid`
fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+rm -f conftest.$ac_objext conftest.$ac_ext
done
else
echo "$as_me: failed program was:" >&5
@@ -7181,13 +6961,14 @@ sed 's/^/| /' conftest.$ac_ext >&5
ac_lo= ac_hi=
fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+rm -f conftest.$ac_objext conftest.$ac_ext
fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+rm -f conftest.$ac_objext conftest.$ac_ext
# Binary search between lo and hi bounds.
while test "x$ac_lo" != "x$ac_hi"; do
ac_mid=`expr '(' $ac_hi - $ac_lo ')' / 2 + $ac_lo`
cat >conftest.$ac_ext <<_ACEOF
+#line $LINENO "configure"
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
@@ -7206,21 +6987,11 @@ test_array [0] = 0
_ACEOF
rm -f conftest.$ac_objext
if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>conftest.er1
+ (eval $ac_compile) 2>&5
ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
+ { ac_try='test -s conftest.$ac_objext'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
@@ -7233,7 +7004,7 @@ sed 's/^/| /' conftest.$ac_ext >&5
ac_lo=`expr '(' $ac_mid ')' + 1`
fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+rm -f conftest.$ac_objext conftest.$ac_ext
done
case $ac_lo in
?*) ac_cv_sizeof_long_double=$ac_lo;;
@@ -7252,6 +7023,7 @@ See \`config.log' for more details." >&2;}
{ (exit 1); exit 1; }; }
else
cat >conftest.$ac_ext <<_ACEOF
+#line $LINENO "configure"
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
@@ -7313,7 +7085,7 @@ echo "$as_me: error: cannot compute sizeof (long double), 77
See \`config.log' for more details." >&2;}
{ (exit 1); exit 1; }; }
fi
-rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
+rm -f core core.* *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
fi
fi
rm -f conftest.val
@@ -7600,13 +7372,13 @@ _ACEOF
# `set' does not quote correctly, so add quotes (double-quote
# substitution turns \\\\ into \\, and sed turns \\ into \).
sed -n \
- "s/'/'\\\\''/g;
- s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p"
+ "s/'/'\\\\''/g;
+ s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p"
;;
*)
# `set' quotes correctly as required by POSIX, so do not add quotes.
sed -n \
- "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p"
+ "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p"
;;
esac;
} |
@@ -7636,13 +7408,13 @@ test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
# trailing colons and then remove the whole line if VPATH becomes empty
# (actually we leave an empty line to preserve line numbers).
if test "x$srcdir" = x.; then
- ac_vpsub='/^[ ]*VPATH[ ]*=/{
+ ac_vpsub='/^[ ]*VPATH[ ]*=/{
s/:*\$(srcdir):*/:/;
s/:*\${srcdir}:*/:/;
s/:*@srcdir@:*/:/;
-s/^\([^=]*=[ ]*\):*/\1/;
+s/^\([^=]*=[ ]*\):*/\1/;
s/:*$//;
-s/^[^=]*=[ ]*$//;
+s/^[^=]*=[ ]*$//;
}'
fi
@@ -7653,7 +7425,7 @@ ac_ltlibobjs=
for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue
# 1. Remove the extension, and $U if already installed.
ac_i=`echo "$ac_i" |
- sed 's/\$U\././;s/\.o$//;s/\.obj$//'`
+ sed 's/\$U\././;s/\.o$//;s/\.obj$//'`
# 2. Add them.
ac_libobjs="$ac_libobjs $ac_i\$U.$ac_objext"
ac_ltlibobjs="$ac_ltlibobjs $ac_i"'$U.lo'
@@ -7697,10 +7469,9 @@ if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then
set -o posix
fi
-DUALCASE=1; export DUALCASE # for MKS sh
# Support unset when possible.
-if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
+if (FOO=FOO; unset FOO) >/dev/null 2>&1; then
as_unset=unset
else
as_unset=false
@@ -7719,7 +7490,7 @@ for as_var in \
LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \
LC_TELEPHONE LC_TIME
do
- if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then
+ if (set +x; test -n "`(eval $as_var=C; export $as_var) 2>&1`"); then
eval $as_var=C; export $as_var
else
$as_unset $as_var
@@ -7898,17 +7669,16 @@ rm -f conf$$ conf$$.exe conf$$.file
if mkdir -p . 2>/dev/null; then
as_mkdir_p=:
else
- test -d ./-p && rmdir ./-p
as_mkdir_p=false
fi
as_executable_p="test -f"
# Sed expression to map a string onto a valid CPP name.
-as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
+as_tr_cpp="sed y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g"
# Sed expression to map a string onto a valid variable name.
-as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
+as_tr_sh="sed y%*+%pp%;s%[^_$as_cr_alnum]%_%g"
# IFS
@@ -7935,7 +7705,7 @@ _ASBOX
cat >&5 <<_CSEOF
This file was extended by GNU C Library $as_me (see version.h), which was
-generated by GNU Autoconf 2.59. Invocation command line was
+generated by GNU Autoconf 2.57. Invocation command line was
CONFIG_FILES = $CONFIG_FILES
CONFIG_HEADERS = $CONFIG_HEADERS
@@ -7979,9 +7749,9 @@ Usage: $0 [OPTIONS] [FILE]...
-d, --debug don't remove temporary files
--recheck update $as_me by reconfiguring in the same conditions
--file=FILE[:TEMPLATE]
- instantiate the configuration file FILE
+ instantiate the configuration file FILE
--header=FILE[:TEMPLATE]
- instantiate the configuration header FILE
+ instantiate the configuration header FILE
Configuration files:
$config_files
@@ -7998,10 +7768,11 @@ _ACEOF
cat >>$CONFIG_STATUS <<_ACEOF
ac_cs_version="\\
GNU C Library config.status (see version.h)
-configured by $0, generated by GNU Autoconf 2.59,
+configured by $0, generated by GNU Autoconf 2.57,
with options \\"`echo "$ac_configure_args" | sed 's/[\\""\`\$]/\\\\&/g'`\\"
-Copyright (C) 2003 Free Software Foundation, Inc.
+Copyright 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001
+Free Software Foundation, Inc.
This config.status script is free software; the Free Software Foundation
gives unlimited permission to copy, distribute and modify it."
srcdir=$srcdir
@@ -8202,7 +7973,6 @@ s,@with_cvs@,$with_cvs,;t t
s,@enable_check_abi@,$enable_check_abi,;t t
s,@oldest_abi@,$oldest_abi,;t t
s,@bindnow@,$bindnow,;t t
-s,@subdirs@,$subdirs,;t t
s,@force_install@,$force_install,;t t
s,@all_warnings@,$all_warnings,;t t
s,@build@,$build,;t t
@@ -8213,6 +7983,8 @@ s,@host@,$host,;t t
s,@host_cpu@,$host_cpu,;t t
s,@host_vendor@,$host_vendor,;t t
s,@host_os@,$host_os,;t t
+s,@subdirs@,$subdirs,;t t
+s,@add_ons@,$add_ons,;t t
s,@base_machine@,$base_machine,;t t
s,@sysnames@,$sysnames,;t t
s,@INSTALL_PROGRAM@,$INSTALL_PROGRAM,;t t
@@ -8337,9 +8109,9 @@ _ACEOF
(echo ':t
/@[a-zA-Z_][a-zA-Z_0-9]*@/!b' && cat $tmp/subs.frag) >$tmp/subs-$ac_sed_frag.sed
if test -z "$ac_sed_cmds"; then
- ac_sed_cmds="sed -f $tmp/subs-$ac_sed_frag.sed"
+ ac_sed_cmds="sed -f $tmp/subs-$ac_sed_frag.sed"
else
- ac_sed_cmds="$ac_sed_cmds | sed -f $tmp/subs-$ac_sed_frag.sed"
+ ac_sed_cmds="$ac_sed_cmds | sed -f $tmp/subs-$ac_sed_frag.sed"
fi
ac_sed_frag=`expr $ac_sed_frag + 1`
ac_beg=$ac_end
@@ -8357,21 +8129,21 @@ for ac_file in : $CONFIG_FILES; do test "x$ac_file" = x: && continue
# Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
case $ac_file in
- | *:- | *:-:* ) # input from stdin
- cat >$tmp/stdin
- ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
- ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
+ cat >$tmp/stdin
+ ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
+ ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
*:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
- ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
+ ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
* ) ac_file_in=$ac_file.in ;;
esac
# Compute @srcdir@, @top_srcdir@, and @INSTALL@ for subdirectories.
ac_dir=`(dirname "$ac_file") 2>/dev/null ||
$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$ac_file" : 'X\(//\)[^/]' \| \
- X"$ac_file" : 'X\(//\)$' \| \
- X"$ac_file" : 'X\(/\)' \| \
- . : '\(.\)' 2>/dev/null ||
+ X"$ac_file" : 'X\(//\)[^/]' \| \
+ X"$ac_file" : 'X\(//\)$' \| \
+ X"$ac_file" : 'X\(/\)' \| \
+ . : '\(.\)' 2>/dev/null ||
echo X"$ac_file" |
sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
/^X\(\/\/\)[^/].*/{ s//\1/; q; }
@@ -8387,10 +8159,10 @@ echo X"$ac_file" |
as_dirs="$as_dir $as_dirs"
as_dir=`(dirname "$as_dir") 2>/dev/null ||
$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$as_dir" : 'X\(//\)[^/]' \| \
- X"$as_dir" : 'X\(//\)$' \| \
- X"$as_dir" : 'X\(/\)' \| \
- . : '\(.\)' 2>/dev/null ||
+ X"$as_dir" : 'X\(//\)[^/]' \| \
+ X"$as_dir" : 'X\(//\)$' \| \
+ X"$as_dir" : 'X\(/\)' \| \
+ . : '\(.\)' 2>/dev/null ||
echo X"$as_dir" |
sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
/^X\(\/\/\)[^/].*/{ s//\1/; q; }
@@ -8428,45 +8200,12 @@ case $srcdir in
ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
ac_top_srcdir=$ac_top_builddir$srcdir ;;
esac
-
-# Do not use `cd foo && pwd` to compute absolute paths, because
-# the directories may not exist.
-case `pwd` in
-.) ac_abs_builddir="$ac_dir";;
-*)
- case "$ac_dir" in
- .) ac_abs_builddir=`pwd`;;
- [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";;
- *) ac_abs_builddir=`pwd`/"$ac_dir";;
- esac;;
-esac
-case $ac_abs_builddir in
-.) ac_abs_top_builddir=${ac_top_builddir}.;;
-*)
- case ${ac_top_builddir}. in
- .) ac_abs_top_builddir=$ac_abs_builddir;;
- [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;;
- *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;;
- esac;;
-esac
-case $ac_abs_builddir in
-.) ac_abs_srcdir=$ac_srcdir;;
-*)
- case $ac_srcdir in
- .) ac_abs_srcdir=$ac_abs_builddir;;
- [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;;
- *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;;
- esac;;
-esac
-case $ac_abs_builddir in
-.) ac_abs_top_srcdir=$ac_top_srcdir;;
-*)
- case $ac_top_srcdir in
- .) ac_abs_top_srcdir=$ac_abs_builddir;;
- [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;;
- *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;;
- esac;;
-esac
+# Don't blindly perform a `cd "$ac_dir"/$ac_foo && pwd` since $ac_foo can be
+# absolute.
+ac_abs_builddir=`cd "$ac_dir" && cd $ac_builddir && pwd`
+ac_abs_top_builddir=`cd "$ac_dir" && cd ${ac_top_builddir}. && pwd`
+ac_abs_srcdir=`cd "$ac_dir" && cd $ac_srcdir && pwd`
+ac_abs_top_srcdir=`cd "$ac_dir" && cd $ac_top_srcdir && pwd`
case $INSTALL in
@@ -8488,7 +8227,7 @@ echo "$as_me: creating $ac_file" >&6;}
configure_input="$ac_file. "
fi
configure_input=$configure_input"Generated from `echo $ac_file_in |
- sed 's,.*/,,'` by configure."
+ sed 's,.*/,,'` by configure."
# First look for the input files in the build tree, otherwise in the
# src tree.
@@ -8497,24 +8236,24 @@ echo "$as_me: creating $ac_file" >&6;}
case $f in
-) echo $tmp/stdin ;;
[\\/$]*)
- # Absolute (can't be DOS-style, as IFS=:)
- test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
+ # Absolute (can't be DOS-style, as IFS=:)
+ test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
echo "$as_me: error: cannot find input file: $f" >&2;}
{ (exit 1); exit 1; }; }
- echo "$f";;
+ echo $f;;
*) # Relative
- if test -f "$f"; then
- # Build tree
- echo "$f"
- elif test -f "$srcdir/$f"; then
- # Source tree
- echo "$srcdir/$f"
- else
- # /dev/null tree
- { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
+ if test -f "$f"; then
+ # Build tree
+ echo $f
+ elif test -f "$srcdir/$f"; then
+ # Source tree
+ echo $srcdir/$f
+ else
+ # /dev/null tree
+ { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
echo "$as_me: error: cannot find input file: $f" >&2;}
{ (exit 1); exit 1; }; }
- fi;;
+ fi;;
esac
done` || { (exit 1); exit 1; }
_ACEOF
@@ -8556,12 +8295,12 @@ cat >>$CONFIG_STATUS <<\_ACEOF
# NAME is the cpp macro being defined and VALUE is the value it is being given.
#
# ac_d sets the value in "#define NAME VALUE" lines.
-ac_dA='s,^\([ ]*\)#\([ ]*define[ ][ ]*\)'
-ac_dB='[ ].*$,\1#\2'
+ac_dA='s,^\([ ]*\)#\([ ]*define[ ][ ]*\)'
+ac_dB='[ ].*$,\1#\2'
ac_dC=' '
ac_dD=',;t'
# ac_u turns "#undef NAME" without trailing blanks into "#define NAME VALUE".
-ac_uA='s,^\([ ]*\)#\([ ]*\)undef\([ ][ ]*\)'
+ac_uA='s,^\([ ]*\)#\([ ]*\)undef\([ ][ ]*\)'
ac_uB='$,\1#\2define\3'
ac_uC=' '
ac_uD=',;t'
@@ -8570,11 +8309,11 @@ for ac_file in : $CONFIG_HEADERS; do test "x$ac_file" = x: && continue
# Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
case $ac_file in
- | *:- | *:-:* ) # input from stdin
- cat >$tmp/stdin
- ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
- ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
+ cat >$tmp/stdin
+ ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
+ ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
*:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
- ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
+ ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
* ) ac_file_in=$ac_file.in ;;
esac
@@ -8588,29 +8327,28 @@ echo "$as_me: creating $ac_file" >&6;}
case $f in
-) echo $tmp/stdin ;;
[\\/$]*)
- # Absolute (can't be DOS-style, as IFS=:)
- test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
+ # Absolute (can't be DOS-style, as IFS=:)
+ test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
echo "$as_me: error: cannot find input file: $f" >&2;}
{ (exit 1); exit 1; }; }
- # Do quote $f, to prevent DOS paths from being IFS'd.
- echo "$f";;
+ echo $f;;
*) # Relative
- if test -f "$f"; then
- # Build tree
- echo "$f"
- elif test -f "$srcdir/$f"; then
- # Source tree
- echo "$srcdir/$f"
- else
- # /dev/null tree
- { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
+ if test -f "$f"; then
+ # Build tree
+ echo $f
+ elif test -f "$srcdir/$f"; then
+ # Source tree
+ echo $srcdir/$f
+ else
+ # /dev/null tree
+ { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
echo "$as_me: error: cannot find input file: $f" >&2;}
{ (exit 1); exit 1; }; }
- fi;;
+ fi;;
esac
done` || { (exit 1); exit 1; }
# Remove the trailing spaces.
- sed 's/[ ]*$//' $ac_file_inputs >$tmp/in
+ sed 's/[ ]*$//' $ac_file_inputs >$tmp/in
_ACEOF
@@ -8633,9 +8371,9 @@ s/[\\&,]/\\&/g
s,[\\$`],\\&,g
t clear
: clear
-s,^[ ]*#[ ]*define[ ][ ]*\([^ (][^ (]*\)\(([^)]*)\)[ ]*\(.*\)$,${ac_dA}\1${ac_dB}\1\2${ac_dC}\3${ac_dD},gp
+s,^[ ]*#[ ]*define[ ][ ]*\([^ (][^ (]*\)\(([^)]*)\)[ ]*\(.*\)$,${ac_dA}\1${ac_dB}\1\2${ac_dC}\3${ac_dD},gp
t end
-s,^[ ]*#[ ]*define[ ][ ]*\([^ ][^ ]*\)[ ]*\(.*\)$,${ac_dA}\1${ac_dB}\1${ac_dC}\2${ac_dD},gp
+s,^[ ]*#[ ]*define[ ][ ]*\([^ ][^ ]*\)[ ]*\(.*\)$,${ac_dA}\1${ac_dB}\1${ac_dC}\2${ac_dD},gp
: end
_ACEOF
# If some macros were called several times there might be several times
@@ -8649,13 +8387,13 @@ rm -f confdef2sed.sed
# example, in the case of _POSIX_SOURCE, which is predefined and required
# on some systems where configure will not decide to define it.
cat >>conftest.undefs <<\_ACEOF
-s,^[ ]*#[ ]*undef[ ][ ]*[a-zA-Z_][a-zA-Z_0-9]*,/* & */,
+s,^[ ]*#[ ]*undef[ ][ ]*[a-zA-Z_][a-zA-Z_0-9]*,/* & */,
_ACEOF
# Break up conftest.defines because some shells have a limit on the size
# of here documents, and old seds have small limits too (100 cmds).
echo ' # Handle all the #define templates only if necessary.' >>$CONFIG_STATUS
-echo ' if grep "^[ ]*#[ ]*define" $tmp/in >/dev/null; then' >>$CONFIG_STATUS
+echo ' if grep "^[ ]*#[ ]*define" $tmp/in >/dev/null; then' >>$CONFIG_STATUS
echo ' # If there are no defines, we may have an empty if/fi' >>$CONFIG_STATUS
echo ' :' >>$CONFIG_STATUS
rm -f conftest.tail
@@ -8664,7 +8402,7 @@ do
# Write a limited-size here document to $tmp/defines.sed.
echo ' cat >$tmp/defines.sed <<CEOF' >>$CONFIG_STATUS
# Speed up: don't consider the non `#define' lines.
- echo '/^[ ]*#[ ]*define/!b' >>$CONFIG_STATUS
+ echo '/^[ ]*#[ ]*define/!b' >>$CONFIG_STATUS
# Work around the forget-to-reset-the-flag bug.
echo 't clr' >>$CONFIG_STATUS
echo ': clr' >>$CONFIG_STATUS
@@ -8691,7 +8429,7 @@ do
# Write a limited-size here document to $tmp/undefs.sed.
echo ' cat >$tmp/undefs.sed <<CEOF' >>$CONFIG_STATUS
# Speed up: don't consider the non `#undef'
- echo '/^[ ]*#[ ]*undef/!b' >>$CONFIG_STATUS
+ echo '/^[ ]*#[ ]*undef/!b' >>$CONFIG_STATUS
# Work around the forget-to-reset-the-flag bug.
echo 't clr' >>$CONFIG_STATUS
echo ': clr' >>$CONFIG_STATUS
@@ -8725,10 +8463,10 @@ echo "$as_me: $ac_file is unchanged" >&6;}
else
ac_dir=`(dirname "$ac_file") 2>/dev/null ||
$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$ac_file" : 'X\(//\)[^/]' \| \
- X"$ac_file" : 'X\(//\)$' \| \
- X"$ac_file" : 'X\(/\)' \| \
- . : '\(.\)' 2>/dev/null ||
+ X"$ac_file" : 'X\(//\)[^/]' \| \
+ X"$ac_file" : 'X\(//\)$' \| \
+ X"$ac_file" : 'X\(/\)' \| \
+ . : '\(.\)' 2>/dev/null ||
echo X"$ac_file" |
sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
/^X\(\/\/\)[^/].*/{ s//\1/; q; }
@@ -8744,10 +8482,10 @@ echo X"$ac_file" |
as_dirs="$as_dir $as_dirs"
as_dir=`(dirname "$as_dir") 2>/dev/null ||
$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$as_dir" : 'X\(//\)[^/]' \| \
- X"$as_dir" : 'X\(//\)$' \| \
- X"$as_dir" : 'X\(/\)' \| \
- . : '\(.\)' 2>/dev/null ||
+ X"$as_dir" : 'X\(//\)[^/]' \| \
+ X"$as_dir" : 'X\(//\)$' \| \
+ X"$as_dir" : 'X\(/\)' \| \
+ . : '\(.\)' 2>/dev/null ||
echo X"$as_dir" |
sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
/^X\(\/\/\)[^/].*/{ s//\1/; q; }
@@ -8779,41 +8517,16 @@ for ac_file in : $CONFIG_COMMANDS; do test "x$ac_file" = x: && continue
ac_source=`echo "$ac_file" | sed 's,[^:]*:,,'`
ac_dir=`(dirname "$ac_dest") 2>/dev/null ||
$as_expr X"$ac_dest" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$ac_dest" : 'X\(//\)[^/]' \| \
- X"$ac_dest" : 'X\(//\)$' \| \
- X"$ac_dest" : 'X\(/\)' \| \
- . : '\(.\)' 2>/dev/null ||
+ X"$ac_dest" : 'X\(//\)[^/]' \| \
+ X"$ac_dest" : 'X\(//\)$' \| \
+ X"$ac_dest" : 'X\(/\)' \| \
+ . : '\(.\)' 2>/dev/null ||
echo X"$ac_dest" |
sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
/^X\(\/\/\)[^/].*/{ s//\1/; q; }
/^X\(\/\/\)$/{ s//\1/; q; }
/^X\(\/\).*/{ s//\1/; q; }
s/.*/./; q'`
- { if $as_mkdir_p; then
- mkdir -p "$ac_dir"
- else
- as_dir="$ac_dir"
- as_dirs=
- while test ! -d "$as_dir"; do
- as_dirs="$as_dir $as_dirs"
- as_dir=`(dirname "$as_dir") 2>/dev/null ||
-$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$as_dir" : 'X\(//\)[^/]' \| \
- X"$as_dir" : 'X\(//\)$' \| \
- X"$as_dir" : 'X\(/\)' \| \
- . : '\(.\)' 2>/dev/null ||
-echo X"$as_dir" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
- /^X\(\/\/\)[^/].*/{ s//\1/; q; }
- /^X\(\/\/\)$/{ s//\1/; q; }
- /^X\(\/\).*/{ s//\1/; q; }
- s/.*/./; q'`
- done
- test ! -n "$as_dirs" || mkdir $as_dirs
- fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5
-echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;}
- { (exit 1); exit 1; }; }; }
-
ac_builddir=.
if test "$ac_dir" != .; then
@@ -8839,45 +8552,12 @@ case $srcdir in
ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
ac_top_srcdir=$ac_top_builddir$srcdir ;;
esac
-
-# Do not use `cd foo && pwd` to compute absolute paths, because
-# the directories may not exist.
-case `pwd` in
-.) ac_abs_builddir="$ac_dir";;
-*)
- case "$ac_dir" in
- .) ac_abs_builddir=`pwd`;;
- [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";;
- *) ac_abs_builddir=`pwd`/"$ac_dir";;
- esac;;
-esac
-case $ac_abs_builddir in
-.) ac_abs_top_builddir=${ac_top_builddir}.;;
-*)
- case ${ac_top_builddir}. in
- .) ac_abs_top_builddir=$ac_abs_builddir;;
- [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;;
- *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;;
- esac;;
-esac
-case $ac_abs_builddir in
-.) ac_abs_srcdir=$ac_srcdir;;
-*)
- case $ac_srcdir in
- .) ac_abs_srcdir=$ac_abs_builddir;;
- [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;;
- *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;;
- esac;;
-esac
-case $ac_abs_builddir in
-.) ac_abs_top_srcdir=$ac_top_srcdir;;
-*)
- case $ac_top_srcdir in
- .) ac_abs_top_srcdir=$ac_abs_builddir;;
- [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;;
- *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;;
- esac;;
-esac
+# Don't blindly perform a `cd "$ac_dir"/$ac_foo && pwd` since $ac_foo can be
+# absolute.
+ac_abs_builddir=`cd "$ac_dir" && cd $ac_builddir && pwd`
+ac_abs_top_builddir=`cd "$ac_dir" && cd ${ac_top_builddir}. && pwd`
+ac_abs_srcdir=`cd "$ac_dir" && cd $ac_srcdir && pwd`
+ac_abs_top_srcdir=`cd "$ac_dir" && cd $ac_top_srcdir && pwd`
{ echo "$as_me:$LINENO: executing $ac_dest commands" >&5
@@ -8978,10 +8658,10 @@ echo "$as_me: configuring in $ac_dir" >&6;}
as_dirs="$as_dir $as_dirs"
as_dir=`(dirname "$as_dir") 2>/dev/null ||
$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$as_dir" : 'X\(//\)[^/]' \| \
- X"$as_dir" : 'X\(//\)$' \| \
- X"$as_dir" : 'X\(/\)' \| \
- . : '\(.\)' 2>/dev/null ||
+ X"$as_dir" : 'X\(//\)[^/]' \| \
+ X"$as_dir" : 'X\(//\)$' \| \
+ X"$as_dir" : 'X\(/\)' \| \
+ . : '\(.\)' 2>/dev/null ||
echo X"$as_dir" |
sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
/^X\(\/\/\)[^/].*/{ s//\1/; q; }
@@ -9019,45 +8699,12 @@ case $srcdir in
ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
ac_top_srcdir=$ac_top_builddir$srcdir ;;
esac
-
-# Do not use `cd foo && pwd` to compute absolute paths, because
-# the directories may not exist.
-case `pwd` in
-.) ac_abs_builddir="$ac_dir";;
-*)
- case "$ac_dir" in
- .) ac_abs_builddir=`pwd`;;
- [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";;
- *) ac_abs_builddir=`pwd`/"$ac_dir";;
- esac;;
-esac
-case $ac_abs_builddir in
-.) ac_abs_top_builddir=${ac_top_builddir}.;;
-*)
- case ${ac_top_builddir}. in
- .) ac_abs_top_builddir=$ac_abs_builddir;;
- [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;;
- *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;;
- esac;;
-esac
-case $ac_abs_builddir in
-.) ac_abs_srcdir=$ac_srcdir;;
-*)
- case $ac_srcdir in
- .) ac_abs_srcdir=$ac_abs_builddir;;
- [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;;
- *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;;
- esac;;
-esac
-case $ac_abs_builddir in
-.) ac_abs_top_srcdir=$ac_top_srcdir;;
-*)
- case $ac_top_srcdir in
- .) ac_abs_top_srcdir=$ac_abs_builddir;;
- [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;;
- *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;;
- esac;;
-esac
+# Don't blindly perform a `cd "$ac_dir"/$ac_foo && pwd` since $ac_foo can be
+# absolute.
+ac_abs_builddir=`cd "$ac_dir" && cd $ac_builddir && pwd`
+ac_abs_top_builddir=`cd "$ac_dir" && cd ${ac_top_builddir}. && pwd`
+ac_abs_srcdir=`cd "$ac_dir" && cd $ac_srcdir && pwd`
+ac_abs_top_srcdir=`cd "$ac_dir" && cd $ac_top_srcdir && pwd`
cd $ac_dir
@@ -9081,15 +8728,15 @@ echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2;}
case $cache_file in
[\\/]* | ?:[\\/]* ) ac_sub_cache_file=$cache_file ;;
*) # Relative path.
- ac_sub_cache_file=$ac_top_builddir$cache_file ;;
+ ac_sub_cache_file=$ac_top_builddir$cache_file ;;
esac
{ echo "$as_me:$LINENO: running $ac_sub_configure $ac_sub_configure_args --cache-file=$ac_sub_cache_file --srcdir=$ac_srcdir" >&5
echo "$as_me: running $ac_sub_configure $ac_sub_configure_args --cache-file=$ac_sub_cache_file --srcdir=$ac_srcdir" >&6;}
# The eval makes quoting arguments work.
eval $ac_sub_configure $ac_sub_configure_args \
- --cache-file=$ac_sub_cache_file --srcdir=$ac_srcdir ||
- { { echo "$as_me:$LINENO: error: $ac_sub_configure failed for $ac_dir" >&5
+ --cache-file=$ac_sub_cache_file --srcdir=$ac_srcdir ||
+ { { echo "$as_me:$LINENO: error: $ac_sub_configure failed for $ac_dir" >&5
echo "$as_me: error: $ac_sub_configure failed for $ac_dir" >&2;}
{ (exit 1); exit 1; }; }
fi
diff --git a/configure.in b/configure.in
index bf60a50028..2391313de8 100644
--- a/configure.in
+++ b/configure.in
@@ -210,38 +210,6 @@ AC_ARG_ENABLE([bind-now],
[bindnow=no])
AC_SUBST(bindnow)
-AC_CONFIG_SUBDIRS([ ])dnl Bonehead new Autoconf whines if we do it cleanly.
-add_ons_pfx=
-if test x"$add_ons" != x; then
- for f in $add_ons; do
- # Some sanity checks
- if test "$f" = "crypt"; then
- AC_MSG_ERROR([
-*** It seems that you're using an old \`crypt' add-on. crypt is now
-*** part of glibc and using the old add-on will not work with this
-*** release. Start again with fresh sources and without the old
-*** \`crypt' add-on.])
- fi
- if test "$f" = "localedata"; then
- AC_MSG_ERROR([
-*** It seems that you're using an old \`localedata' add-on. localedata
-*** is now part of glibc and using the old add-on will not work with
-*** this release. Start again with fresh sources and without the old
-*** \`localedata' add-on.])
- fi
- # Test whether such a subdir really exists.
- if test -d $srcdir/$f; then
- add_ons_pfx="$add_ons_pfx $f/"
- dnl This variable is what AC_CONFIG_SUBDIRS is supposed to set,
- dnl but the new Autoconf maintainers don't care about compatibility
- dnl so we cannot use it normally any more without complaints.
- subdirs="$subdirs $f"
- else
- AC_MSG_ERROR(add-on directory \"$f\" does not exist)
- fi
- done
-fi
-
dnl On some platforms we cannot use dynamic loading. We must provide
dnl static NSS modules.
AC_ARG_ENABLE([static-nss],
@@ -334,6 +302,9 @@ aix*)
;;
esac
+# The configure fragment of an add-on port can modify these to supplement
+# or override the table in the case statement below. No fragment should
+# ever change the config_* variables, however.
machine=$config_machine
vendor=$config_vendor
os=$config_os
@@ -351,6 +322,59 @@ case "$machine-$host_os" in
;;
esac
+
+# An add-on can set this when it the tuple to disable the sanity check below.
+libc_config_ok=no
+
+dnl Having this here, though empty, makes sure that if add-ons' fragments
+dnl do AC_CONFIG_SUBDIRS([some-dir]), which just sets $subdirs, then
+dnl our AC_OUTPUT will actually use it.
+AC_CONFIG_SUBDIRS()
+
+add_ons_sfx=
+add_ons_pfx=
+if test x"$add_ons" != x; then
+ for f in $add_ons; do
+ # Some sanity checks
+ case "$f" in
+ crypt)
+ AC_MSG_ERROR([
+*** It seems that you're using an old \`crypt' add-on. crypt is now
+*** part of glibc and using the old add-on will not work with this
+*** release. Start again with fresh sources and without the old
+*** \`crypt' add-on.])
+ ;;
+ localedata)
+ AC_MSG_ERROR([
+*** It seems that you're using an old \`localedata' add-on. localedata
+*** is now part of glibc and using the old add-on will not work with
+*** this release. Start again with fresh sources and without the old
+*** \`localedata' add-on.])
+ ;;
+ esac
+
+ # Test whether such a subdir really exists.
+ if test -d $srcdir/$f; then
+ add_ons_pfx="$add_ons_pfx $f/"
+ add_ons_sfx="$add_ons_sfx /$f"
+ else
+ AC_MSG_ERROR(add-on directory \"$f\" does not exist)
+ fi
+ done
+
+ for f in $add_ons; do
+ frag=$srcdir/$f/configure
+ if test -r $frag; then
+ AC_MSG_RESULT(running configure fragment for add-on $f)
+ . $frag
+ else
+ AC_MSG_WARN(add-on fragment $frag missing)
+ fi
+ done
+fi
+AC_SUBST(add_ons)
+
+
###
### I put this here to prevent those annoying emails from people who cannot
### read and try to compile glibc on unsupported platforms. --drepper
@@ -359,7 +383,7 @@ esac
### one can skip this test to make the configuration not fail for unsupported
### platforms.
###
-if test -z "$enable_hacker_mode"; then
+if test -z "$enable_hacker_mode" && test x"$libc_config_ok" != xyes; then
case "$machine-$host_os" in
*-linux* | *-gnu* | arm*-none* | powerpc-aix4.3.*)
;;
@@ -378,8 +402,9 @@ fi
dnl We need to use [ and ] for other purposes for a while now.
changequote(,)dnl
# Expand the configuration machine name into a subdirectory by architecture
-# type and particular chip.
-case "$machine" in
+# type and particular chip. If an add-on configure fragment already set
+# base_machine, we don't change it.
+test -n "$base_machine" || case "$machine" in
a29k | am29000) base_machine=a29k machine=a29k ;;
alpha*) base_machine=alpha machine=alpha/$machine ;;
arm*) base_machine=arm machine=arm/arm32/$machine ;;
@@ -535,16 +560,18 @@ for d in $add_ons_pfx ''; do
for o in /$ostry ''; do
test "$o" = / && continue
for m in $mach ''; do
- if test "$m0$b$v$o$m"; then
- try="${d}sysdeps$m0$b$v$o$m"
- test -n "$enable_debug_configure" &&
- echo "$0 [DEBUG]: try $try" >&2
- if test -d $srcdir/$try; then
- sysnames="$sysnames $try"
- { test -n "$o" || test -n "$b"; } && os_used=t
- { test -n "$m" || test -n "$m0"; } && machine_used=t
+ for a in $add_ons_sfx ''; do
+ if test "$m0$b$v$o$m"; then
+ try="${d}sysdeps$m0$b$v$o$m$a"
+ test -n "$enable_debug_configure" &&
+ echo "$0 [DEBUG]: try $try" >&2
+ if test -d $srcdir/$try; then
+ sysnames="$sysnames $try"
+ { test -n "$o" || test -n "$b"; } && os_used=t
+ { test -n "$m" || test -n "$m0"; } && machine_used=t
+ fi
fi
- fi
+ done
done
done
done
diff --git a/libidn/ChangeLog b/libidn/ChangeLog
index 5e2f6e17de..7f65c50711 100644
--- a/libidn/ChangeLog
+++ b/libidn/ChangeLog
@@ -1,3 +1,7 @@
+2004-07-02 Roland McGrath <roland@redhat.com>
+
+ * configure: Don't exit.
+
2004-05-21 Ulrich Drepper <drepper@redhat.com>
* idna.c (idna_to_unicode_4z4z): Fix test for failed memory allocation.
diff --git a/linuxthreads/ChangeLog b/linuxthreads/ChangeLog
index 92a1fbdb24..df63d6bc93 100644
--- a/linuxthreads/ChangeLog
+++ b/linuxthreads/ChangeLog
@@ -1,3 +1,7 @@
+2004-07-02 Roland McGrath <roland@redhat.com>
+
+ * configure: Don't exit.
+
2004-07-20 Alexandre Oliva <aoliva@redhat.com>
* sysdeps/mips/pt-machine.h: Use standard names for ABI macros,
diff --git a/nptl/ChangeLog b/nptl/ChangeLog
index 1b69d66e95..44af273384 100644
--- a/nptl/ChangeLog
+++ b/nptl/ChangeLog
@@ -1,3 +1,7 @@
+2004-07-02 Roland McGrath <roland@redhat.com>
+
+ * configure: Don't exit.
+
2004-07-14 Kaz Kojima <kkojima@rr.iij4u.or.jp>
* sysdeps/unix/sysv/linux/sh/pthread_cond_timedwait.S
diff --git a/sysdeps/unix/sysv/linux/bits/in.h b/sysdeps/unix/sysv/linux/bits/in.h
index d92619630a..9d587897ad 100644
--- a/sysdeps/unix/sysv/linux/bits/in.h
+++ b/sysdeps/unix/sysv/linux/bits/in.h
@@ -85,14 +85,7 @@ struct ip_opts
char ip_opts[40]; /* Actually variable in size. */
};
-/* Structure used for IP_ADD_MEMBERSHIP and IP_DROP_MEMBERSHIP. */
-struct ip_mreq
- {
- struct in_addr imr_multiaddr; /* IP multicast address of group */
- struct in_addr imr_interface; /* local IP address of interface */
- };
-
-/* As above but including interface specification by index. */
+/* Like `struct ip_mreq' but including interface specification by index. */
struct ip_mreqn
{
struct in_addr imr_multiaddr; /* IP multicast address of group */