Update.

	* Makeconfig (all-subdirs): Remove db and db2.
	* db/*: Removed.
	* db2/*: Removed.

1 files changed, 0 insertions, 153 deletions

diff --git a/db2/mp/mp_fput.c b/db2/mp/mp_fput.c
deleted file mode 100644
index c551f97380..0000000000
--- a/db2/mp/mp_fput.c
+++ /dev/null
@@ -1,153 +0,0 @@
-/*-
- * See the file LICENSE for redistribution information.
- *
- * Copyright (c) 1996, 1997, 1998
- *	Sleepycat Software.  All rights reserved.
- */
-#include "config.h"
-
-#ifndef lint
-static const char sccsid[] = "@(#)mp_fput.c	10.24 (Sleepycat) 9/27/98";
-#endif /* not lint */
-
-#ifndef NO_SYSTEM_INCLUDES
-#include <sys/types.h>
-
-#include <errno.h>
-#endif
-
-#include "db_int.h"
-#include "shqueue.h"
-#include "db_shash.h"
-#include "mp.h"
-#include "common_ext.h"
-
-/*
- * memp_fput --
- *	Mpool file put function.
- */
-int
-memp_fput(dbmfp, pgaddr, flags)
-	DB_MPOOLFILE *dbmfp;
-	void *pgaddr;
-	u_int32_t flags;
-{
-	BH *bhp;
-	DB_MPOOL *dbmp;
-	MPOOL *mp;
-	int wrote, ret;
-
-	dbmp = dbmfp->dbmp;
-	mp = dbmp->mp;
-
-	MP_PANIC_CHECK(dbmp);
-
-	/* Validate arguments. */
-	if (flags) {
-		if ((ret = __db_fchk(dbmp->dbenv, "memp_fput", flags,
-		    DB_MPOOL_CLEAN | DB_MPOOL_DIRTY | DB_MPOOL_DISCARD)) != 0)
-			return (ret);
-		if ((ret = __db_fcchk(dbmp->dbenv, "memp_fput",
-		    flags, DB_MPOOL_CLEAN, DB_MPOOL_DIRTY)) != 0)
-			return (ret);
-
-		if (LF_ISSET(DB_MPOOL_DIRTY) && F_ISSET(dbmfp, MP_READONLY)) {
-			__db_err(dbmp->dbenv,
-			    "%s: dirty flag set for readonly file page",
-			    __memp_fn(dbmfp));
-			return (EACCES);
-		}
-	}
-
-	LOCKREGION(dbmp);
-
-	/* Decrement the pinned reference count. */
-	if (dbmfp->pinref == 0)
-		__db_err(dbmp->dbenv,
-		    "%s: put: more blocks returned than retrieved",
-		    __memp_fn(dbmfp));
-	else
-		--dbmfp->pinref;
-
-	/*
-	 * If we're mapping the file, there's nothing to do.  Because we can
-	 * stop mapping the file at any time, we have to check on each buffer
-	 * to see if the address we gave the application was part of the map
-	 * region.
-	 */
-	if (dbmfp->addr != NULL && pgaddr >= dbmfp->addr &&
-	    (u_int8_t *)pgaddr <= (u_int8_t *)dbmfp->addr + dbmfp->len) {
-		UNLOCKREGION(dbmp);
-		return (0);
-	}
-
-	/* Convert the page address to a buffer header. */
-	bhp = (BH *)((u_int8_t *)pgaddr - SSZA(BH, buf));
-
-	/* Set/clear the page bits. */
-	if (LF_ISSET(DB_MPOOL_CLEAN) && F_ISSET(bhp, BH_DIRTY)) {
-		++mp->stat.st_page_clean;
-		--mp->stat.st_page_dirty;
-		F_CLR(bhp, BH_DIRTY);
-	}
-	if (LF_ISSET(DB_MPOOL_DIRTY) && !F_ISSET(bhp, BH_DIRTY)) {
-		--mp->stat.st_page_clean;
-		++mp->stat.st_page_dirty;
-		F_SET(bhp, BH_DIRTY);
-	}
-	if (LF_ISSET(DB_MPOOL_DISCARD))
-		F_SET(bhp, BH_DISCARD);
-
-	/*
-	 * Check for a reference count going to zero.  This can happen if the
-	 * application returns a page twice.
-	 */
-	if (bhp->ref == 0) {
-		__db_err(dbmp->dbenv, "%s: page %lu: unpinned page returned",
-		    __memp_fn(dbmfp), (u_long)bhp->pgno);
-		UNLOCKREGION(dbmp);
-		return (EINVAL);
-	}
-
-	/*
-	 * If more than one reference to the page, we're done.  Ignore the
-	 * discard flags (for now) and leave it at its position in the LRU
-	 * chain.  The rest gets done at last reference close.
-	 */
-	if (--bhp->ref > 0) {
-		UNLOCKREGION(dbmp);
-		return (0);
-	}
-
-	/*
-	 * If this buffer is scheduled for writing because of a checkpoint, we
-	 * need to write it (if we marked it dirty), or update the checkpoint
-	 * counters (if we didn't mark it dirty).  If we try to write it and
-	 * can't, that's not necessarily an error, but set a flag so that the
-	 * next time the memp_sync function runs we try writing it there, as
-	 * the checkpoint application better be able to write all of the files.
-	 */
-	if (F_ISSET(bhp, BH_WRITE)) {
-		if (F_ISSET(bhp, BH_DIRTY)) {
-			if (__memp_bhwrite(dbmp,
-			    dbmfp->mfp, bhp, NULL, &wrote) != 0 || !wrote)
-				F_SET(mp, MP_LSN_RETRY);
-		} else {
-			F_CLR(bhp, BH_WRITE);
-
-			--dbmfp->mfp->lsn_cnt;
-			--mp->lsn_cnt;
-		}
-	}
-
-	/* Move the buffer to the head/tail of the LRU chain. */
-	SH_TAILQ_REMOVE(&mp->bhq, bhp, q, __bh);
-	if (F_ISSET(bhp, BH_DISCARD))
-		SH_TAILQ_INSERT_HEAD(&mp->bhq, bhp, q, __bh);
-	else
-		SH_TAILQ_INSERT_TAIL(&mp->bhq, bhp, q);
-
-
-	UNLOCKREGION(dbmp);
-	return (0);
-}