/* * mos7720.c * Controls the Moschip 7720 usb to dual port serial convertor * * Copyright 2006 Moschip Semiconductor Tech. Ltd. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation, version 2 of the License. * * Developed by: * Vijaya Kumar * Ajay Kumar * Gurudeva * * Cleaned up from the original by: * Greg Kroah-Hartman * * Originally based on drivers/usb/serial/io_edgeport.c which is: * Copyright (C) 2000 Inside Out Networks, All rights reserved. * Copyright (C) 2001-2002 Greg Kroah-Hartman */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include /* * Version Information */ #define DRIVER_VERSION "1.0.0.4F" #define DRIVER_AUTHOR "Aspire Communications pvt Ltd." #define DRIVER_DESC "Moschip USB Serial Driver" /* default urb timeout */ #define MOS_WDR_TIMEOUT (HZ * 5) #define MOS_PORT1 0x0200 #define MOS_PORT2 0x0300 #define MOS_VENREG 0x0000 #define MOS_MAX_PORT 0x02 #define MOS_WRITE 0x0E #define MOS_READ 0x0D /* Interrupt Rotinue Defines */ #define SERIAL_IIR_RLS 0x06 #define SERIAL_IIR_RDA 0x04 #define SERIAL_IIR_CTI 0x0c #define SERIAL_IIR_THR 0x02 #define SERIAL_IIR_MS 0x00 #define NUM_URBS 16 /* URB Count */ #define URB_TRANSFER_BUFFER_SIZE 32 /* URB Size */ /* This structure holds all of the local port information */ struct moschip_port { __u8 shadowLCR; /* last LCR value received */ __u8 shadowMCR; /* last MCR value received */ __u8 shadowMSR; /* last MSR value received */ char open; struct async_icount icount; struct usb_serial_port *port; /* loop back to the owner */ struct urb *write_urb_pool[NUM_URBS]; }; /* This structure holds all of the individual serial device information */ struct moschip_serial { int interrupt_started; }; static int debug; #define USB_VENDOR_ID_MOSCHIP 0x9710 #define MOSCHIP_DEVICE_ID_7720 0x7720 #define MOSCHIP_DEVICE_ID_7715 0x7715 static struct usb_device_id moschip_port_id_table [] = { { USB_DEVICE(USB_VENDOR_ID_MOSCHIP, MOSCHIP_DEVICE_ID_7720) }, { } /* terminating entry */ }; MODULE_DEVICE_TABLE(usb, moschip_port_id_table); /* * mos7720_interrupt_callback * this is the callback function for when we have received data on the * interrupt endpoint. */ static void mos7720_interrupt_callback(struct urb *urb) { int result; int length; int status = urb->status; __u8 *data; __u8 sp1; __u8 sp2; dbg("%s", " : Entering\n"); switch (status) { case 0: /* success */ break; case -ECONNRESET: case -ENOENT: case -ESHUTDOWN: /* this urb is terminated, clean up */ dbg("%s - urb shutting down with status: %d", __func__, status); return; default: dbg("%s - nonzero urb status received: %d", __func__, status); goto exit; } length = urb->actual_length; data = urb->transfer_buffer; /* Moschip get 4 bytes * Byte 1 IIR Port 1 (port.number is 0) * Byte 2 IIR Port 2 (port.number is 1) * Byte 3 -------------- * Byte 4 FIFO status for both */ /* the above description is inverted * oneukum 2007-03-14 */ if (unlikely(length != 4)) { dbg("Wrong data !!!"); return; } sp1 = data[3]; sp2 = data[2]; if ((sp1 | sp2) & 0x01) { /* No Interrupt Pending in both the ports */ dbg("No Interrupt !!!"); } else { switch (sp1 & 0x0f) { case SERIAL_IIR_RLS: dbg("Serial Port 1: Receiver status error or address " "bit detected in 9-bit mode\n"); break; case SERIAL_IIR_CTI: dbg("Serial Port 1: Receiver time out"); break; case SERIAL_IIR_MS: dbg("Serial Port 1: Modem status change"); break; } switch (sp2 & 0x0f) { case SERIAL_IIR_RLS: dbg("Serial Port 2: Receiver status error or address " "bit detected in 9-bit mode"); break; case SERIAL_IIR_CTI: dbg("Serial Port 2: Receiver time out"); break; case SERIAL_IIR_MS: dbg("Serial Port 2: Modem status change"); break; } } exit: result = usb_submit_urb(urb, GFP_ATOMIC); if (result) dev_err(&urb->dev->dev, "%s - Error %d submitting control urb\n", __func__, result); return; } /* * mos7720_bulk_in_callback * this is the callback function for when we have received data on the * bulk in endpoint. */ static void mos7720_bulk_in_callback(struct urb *urb) { int retval; unsigned char *data ; struct usb_serial_port *port; struct moschip_port *mos7720_port; struct tty_struct *tty; int status = urb->status; if (status) { dbg("nonzero read bulk status received: %d", status); return; } mos7720_port = urb->context; if (!mos7720_port) { dbg("%s", "NULL mos7720_port pointer \n"); return ; } port = mos7720_port->port; dbg("Entering...%s", __func__); data = urb->transfer_buffer; tty = tty_port_tty_get(&port->port); if (tty && urb->actual_length) { tty_buffer_request_room(tty, urb->actual_length); tty_insert_flip_string(tty, data, urb->actual_length); tty_flip_buffer_push(tty); } tty_kref_put(tty); if (!port->read_urb) { dbg("URB KILLED !!!"); return; } if (port->read_urb->status != -EINPROGRESS) { port->read_urb->dev = port->serial->dev; retval = usb_submit_urb(port->read_urb, GFP_ATOMIC); if (retval) dbg("usb_submit_urb(read bulk) failed, retval = %d", retval); } } /* * mos7720_bulk_out_data_callback * this is the callback function for when we have finished sending serial * data on the bulk out endpoint. */ static void mos7720_bulk_out_data_callback(struct urb *urb) { struct moschip_port *mos7720_port; struct tty_struct *tty; int status = urb->status; if (status) { dbg("nonzero write bulk status received:%d", status); return; } mos7720_port = urb->context; if (!mos7720_port) { dbg("NULL mos7720_port pointer"); return ; } dbg("Entering ........."); tty = tty_port_tty_get(&mos7720_port->port->port); if (tty && mos7720_port->open) tty_wakeup(tty); tty_kref_put(tty); } /* * send_mos_cmd * this function will be used for sending command to device */ static int send_mos_cmd(struct usb_serial *serial, __u8 request, __u16 value, __u16 index, void *data) { int status; unsigned int pipe; u16 product = le16_to_cpu(serial->dev->descriptor.idProduct); __u8 requesttype; __u16 size = 0x0000; if (value < MOS_MAX_PORT) { if (product == MOSCHIP_DEVICE_ID_7715) value = value*0x100+0x100; else value = value*0x100+0x200; } else { value = 0x0000; if ((product == MOSCHIP_DEVICE_ID_7715) && (index != 0x08)) { dbg("serial->product== MOSCHIP_DEVICE_ID_7715"); /* index = 0x01 ; */ } } if (request == MOS_WRITE) { request = (__u8)MOS_WRITE; requesttype = (__u8)0x40; value = value + (__u16)*((unsigned char *)data); data = NULL; pipe = usb_sndctrlpipe(serial->dev, 0); } else { request = (__u8)MOS_READ; requesttype = (__u8)0xC0; size = 0x01; pipe = usb_rcvctrlpipe(serial->dev, 0); } status = usb_control_msg(serial->dev, pipe, request, requesttype, value, index, data, size, MOS_WDR_TIMEOUT); if (status < 0) dbg("Command Write failed Value %x index %x\n", value, index); return status; } static int mos7720_open(struct tty_struct *tty, struct usb_serial_port *port, struct file *filp) { struct usb_serial *serial; struct usb_serial_port *port0; struct urb *urb; struct moschip_serial *mos7720_serial; struct moschip_port *mos7720_port; int response; int port_number; char data; int allocated_urbs = 0; int j; serial = port->serial; mos7720_port = usb_get_serial_port_data(port); if (mos7720_port == NULL) return -ENODEV; port0 = serial->port[0]; mos7720_serial = usb_get_serial_data(serial); if (mos7720_serial == NULL || port0 == NULL) return -ENODEV; usb_clear_halt(serial->dev, port->write_urb->pipe); usb_clear_halt(serial->dev, port->read_urb->pipe); /* Initialising the write urb pool */ for (j = 0; j < NUM_URBS; ++j) { urb = usb_alloc_urb(0, GFP_KERNEL); mos7720_port->write_urb_pool[j] = urb; if (urb == NULL) { dev_err(&port->dev, "No more urbs???\n"); continue; } urb->transfer_buffer = kmalloc(URB_TRANSFER_BUFFER_SIZE, GFP_KERNEL); if (!urb->transfer_buffer) { dev_err(&port->dev, "%s-out of memory for urb buffers.\n", __func__); usb_free_urb(mos7720_port->write_urb_pool[j]); mos7720_port->write_urb_pool[j] = NULL; continue; } allocated_urbs++; } if (!allocated_urbs) return -ENOMEM; /* Initialize MCS7720 -- Write Init values to corresponding Registers * * Register Index * 1 : IER * 2 : FCR * 3 : LCR * 4 : MCR * * 0x08 : SP1/2 Control Reg */ port_number = port->number - port->serial->minor; send_mos_cmd(port->serial, MOS_READ, port_number, UART_LSR, &data); dbg("SS::%p LSR:%x\n", mos7720_port, data); dbg("Check:Sending Command .........."); data = 0x02; send_mos_cmd(serial, MOS_WRITE, MOS_MAX_PORT, 0x01, &data); data = 0x02; send_mos_cmd(serial, MOS_WRITE, MOS_MAX_PORT, 0x02, &data); data = 0x00; send_mos_cmd(serial, MOS_WRITE, port_number, 0x01, &data); data = 0x00; send_mos_cmd(serial, MOS_WRITE, port_number, 0x02, &data); data = 0xCF; send_mos_cmd(serial, MOS_WRITE, port_number, 0x02, &data); data = 0x03; mos7720_port->shadowLCR = data; send_mos_cmd(serial, MOS_WRITE, port_number, 0x03, &data); data = 0x0b; mos7720_port->shadowMCR = data; send_mos_cmd(serial, MOS_WRITE, port_number, 0x04, &data); data = 0x0b; send_mos_cmd(serial, MOS_WRITE, port_number, 0x04, &data); data = 0x00; send_mos_cmd(serial, MOS_READ, MOS_MAX_PORT, 0x08, &data); data = 0x00; send_mos_cmd(serial, MOS_WRITE, MOS_MAX_PORT, 0x08, &data); /* data = 0x00; send_mos_cmd(serial, MOS_READ, MOS_MAX_PORT, port_number + 1, &data); data = 0x03; send_mos_cmd(serial, MOS_WRITE, MOS_MAX_PORT, port_number + 1, &data); data = 0x00; send_mos_cmd(port->serial, MOS_WRITE, MOS_MAX_PORT, port_number + 1, &data); */ data = 0x00; send_mos_cmd(serial, MOS_READ, MOS_MAX_PORT, 0x08, &data); data = data | (port->number - port->serial->minor + 1); send_mos_cmd(serial, MOS_WRITE, MOS_MAX_PORT, 0x08, &data); data = 0x83; mos7720_port->shadowLCR = data; send_mos_cmd(serial, MOS_WRITE, port_number, 0x03, &data); data = 0x0c; send_mos_cmd(serial, MOS_WRITE, port_number, 0x00, &data); data = 0x00; send_mos_cmd(serial, MOS_WRITE, port_number, 0x01, &data); data = 0x03; mos7720_port->shadowLCR = data; send_mos_cmd(serial, MOS_WRITE, port_number, 0x03, &data); data = 0x0c; send_mos_cmd(serial, MOS_WRITE, port_number, 0x01, &data); data = 0x0c; send_mos_cmd(serial, MOS_WRITE, port_number, 0x01, &data); /* force low_latency on so that our tty_push actually forces * * the data through,otherwise it is scheduled, and with * * high data rates (like with OHCI) data can get lost. */ if (tty) tty->low_latency = 1; /* see if we've set up our endpoint info yet * * (can't set it up in mos7720_startup as the * * structures were not set up at that time.) */ if (!mos7720_serial->interrupt_started) { dbg("Interrupt buffer NULL !!!"); /* not set up yet, so do it now */ mos7720_serial->interrupt_started = 1; dbg("To Submit URB !!!"); /* set up our interrupt urb */ usb_fill_int_urb(port0->interrupt_in_urb, serial->dev, usb_rcvintpipe(serial->dev, port->interrupt_in_endpointAddress), port0->interrupt_in_buffer, port0->interrupt_in_urb->transfer_buffer_length, mos7720_interrupt_callback, mos7720_port, port0->interrupt_in_urb->interval); /* start interrupt read for this mos7720 this interrupt * * will continue as long as the mos7720 is connected */ dbg("Submit URB over !!!"); response = usb_submit_urb(port0->interrupt_in_urb, GFP_KERNEL); if (response) dev_err(&port->dev, "%s - Error %d submitting control urb\n", __func__, response); } /* set up our bulk in urb */ usb_fill_bulk_urb(port->read_urb, serial->dev, usb_rcvbulkpipe(serial->dev, port->bulk_in_endpointAddress), port->bulk_in_buffer, port->read_urb->transfer_buffer_length, mos7720_bulk_in_callback, mos7720_port); response = usb_submit_urb(port->read_urb, GFP_KERNEL); if (response) dev_err(&port->dev, "%s - Error %d submitting read urb\n", __func__, response); /* initialize our icount structure */ memset(&(mos7720_port->icount), 0x00, sizeof(mos7720_port->icount)); /* initialize our port settings */ mos7720_port->shadowMCR = UART_MCR_OUT2; /* Must set to enable ints! */ /* send a open port command */ mos7720_port->open = 1; return 0; } /* * mos7720_chars_in_buffer * this function is called by the tty driver when it wants to know how many * bytes of data we currently have outstanding in the port (data that has * been written, but hasn't made it out the port yet) * If successful, we return the number of bytes left to be written in the * system, * Otherwise we return a negative error number. */ static int mos7720_chars_in_buffer(struct tty_struct *tty) { struct usb_serial_port *port = tty->driver_data; int i; int chars = 0; struct moschip_port *mos7720_port; dbg("%s:entering ...........", __func__); mos7720_port = usb_get_serial_port_data(port); if (mos7720_port == NULL) { dbg("%s:leaving ...........", __func__); return -ENODEV; } for (i = 0; i < NUM_URBS; ++i) { if (mos7720_port->write_urb_pool[i] && mos7720_port->write_urb_pool[i]->status == -EINPROGRESS) chars += URB_TRANSFER_BUFFER_SIZE; } dbg("%s - returns %d", __func__, chars); return chars; } static void mos7720_close(struct tty_struct *tty, struct usb_serial_port *port, struct file *filp) { struct usb_serial *serial; struct moschip_port *mos7720_port; char data; int j; dbg("mos7720_close:entering..."); serial = port->serial; mos7720_port = usb_get_serial_port_data(port); if (mos7720_port == NULL) return; for (j = 0; j < NUM_URBS; ++j) usb_kill_urb(mos7720_port->write_urb_pool[j]); /* Freeing Write URBs */ for (j = 0; j < NUM_URBS; ++j) { if (mos7720_port->write_urb_pool[j]) { kfree(mos7720_port->write_urb_pool[j]->transfer_buffer); usb_free_urb(mos7720_port->write_urb_pool[j]); } } /* While closing port, shutdown all bulk read, write * * and interrupt read if they exists, otherwise nop */ dbg("Shutdown bulk write"); usb_kill_urb(port->write_urb); dbg("Shutdown bulk read"); usb_kill_urb(port->read_urb); mutex_lock(&serial->disc_mutex); /* these commands must not be issued if the device has * been disconnected */ if (!serial->disconnected) { data = 0x00; send_mos_cmd(serial, MOS_WRITE, port->number - port->serial->minor, 0x04, &data); data = 0x00; send_mos_cmd(serial, MOS_WRITE, port->number - port->serial->minor, 0x01, &data); } mutex_unlock(&serial->disc_mutex); mos7720_port->open = 0; dbg("Leaving %s", __func__); } static void mos7720_break(struct tty_struct *tty, int break_state) { struct usb_serial_port *port = tty->driver_data; unsigned char data; struct usb_serial *serial; struct moschip_port *mos7720_port; dbg("Entering %s", __func__); serial = port->serial; mos7720_port = usb_get_serial_port_data(port); if (mos7720_port == NULL) return; if (break_state == -1) data = mos7720_port->shadowLCR | UART_LCR_SBC; else data = mos7720_port->shadowLCR & ~UART_LCR_SBC; mos7720_port->shadowLCR = data; send_mos_cmd(serial, MOS_WRITE, port->number - port->serial->minor, 0x03, &data); return; } /* * mos7720_write_room * this function is called by the tty driver when it wants to know how many * bytes of data we can accept for a specific port. * If successful, we return the amount of room that we have for this port * Otherwise we return a negative error number. */ static int mos7720_write_room(struct tty_struct *tty) { struct usb_serial_port *port = tty->driver_data; struct moschip_port *mos7720_port; int room = 0; int i; dbg("%s:entering ...........", __func__); mos7720_port = usb_get_serial_port_data(port); if (mos7720_port == NULL) { dbg("%s:leaving ...........", __func__); return -ENODEV; } /* FIXME: Locking */ for (i = 0; i < NUM_URBS; ++i) { if (mos7720_port->write_urb_pool[i] && mos7720_port->write_urb_pool[i]->status != -EINPROGRESS) room += URB_TRANSFER_BUFFER_SIZE; } dbg("%s - returns %d", __func__, room); return room; } static int mos7720_write(struct tty_struct *tty, struct usb_serial_port *port, const unsigned char *data, int count) { int status; int i; int bytes_sent = 0; int transfer_size; struct moschip_port *mos7720_port; struct usb_serial *serial; struct urb *urb; const unsigned char *current_position = data; dbg("%s:entering ...........", __func__); serial = port->serial; mos7720_port = usb_get_serial_port_data(port); if (mos7720_port == NULL) { dbg("mos7720_port is NULL"); return -ENODEV; } /* try to find a free urb in the list */ urb = NULL; for (i = 0; i < NUM_URBS; ++i) { if (mos7720_port->write_urb_pool[i] && mos7720_port->write_urb_pool[i]->status != -EINPROGRESS) { urb = mos7720_port->write_urb_pool[i]; dbg("URB:%d", i); break; } } if (urb == NULL) { dbg("%s - no more free urbs", __func__); goto exit; } if (urb->transfer_buffer == NULL) { urb->transfer_buffer = kmalloc(URB_TRANSFER_BUFFER_SIZE, GFP_KERNEL); if (urb->transfer_buffer == NULL) { dev_err(&port->dev, "%s no more kernel memory...\n", __func__); goto exit; } } transfer_size = min(count, URB_TRANSFER_BUFFER_SIZE); memcpy(urb->transfer_buffer, current_position, transfer_size); usb_serial_debug_data(debug, &port->dev, __func__, transfer_size, urb->transfer_buffer); /* fill urb with data and submit */ usb_fill_bulk_urb(urb, serial->dev, usb_sndbulkpipe(serial->dev, port->bulk_out_endpointAddress), urb->transfer_buffer, transfer_size, mos7720_bulk_out_data_callback, mos7720_port); /* send it down the pipe */ status = usb_submit_urb(urb, GFP_ATOMIC); if (status) { dev_err(&port->dev, "%s - usb_submit_urb(write bulk) failed " "with status = %d\n", __func__, status); bytes_sent = status; goto exit; } bytes_sent = transfer_size; exit: return bytes_sent; } static void mos7720_throttle(struct tty_struct *tty) { struct usb_serial_port *port = tty->driver_data; struct moschip_port *mos7720_port; int status; dbg("%s- port %d\n", __func__, port->number); mos7720_port = usb_get_serial_port_data(port); if (mos7720_port == NULL) return; if (!mos7720_port->open) { dbg("port not opened"); return; } dbg("%s: Entering ..........", __func__); /* if we are implementing XON/XOFF, send the stop character */ if (I_IXOFF(tty)) { unsigned char stop_char = STOP_CHAR(tty); status = mos7720_write(tty, port, &stop_char, 1); if (status <= 0) return; } /* if we are implementing RTS/CTS, toggle that line */ if (tty->termios->c_cflag & CRTSCTS) { mos7720_port->shadowMCR &= ~UART_MCR_RTS; status = send_mos_cmd(port->serial, MOS_WRITE, port->number - port->serial->minor, UART_MCR, &mos7720_port->shadowMCR); if (status != 0) return; } } static void mos7720_unthrottle(struct tty_struct *tty) { struct usb_serial_port *port = tty->driver_data; struct moschip_port *mos7720_port = usb_get_serial_port_data(port); int status; if (mos7720_port == NULL) return; if (!mos7720_port->open) { dbg("%s - port not opened", __func__); return; } dbg("%s: Entering ..........", __func__); /* if we are implementing XON/XOFF, send the start character */ if (I_IXOFF(tty)) { unsigned char start_char = START_CHAR(tty); status = mos7720_write(tty, port, &start_char, 1); if (status <= 0) return; } /* if we are implementing RTS/CTS, toggle that line */ if (tty->termios->c_cflag & CRTSCTS) { mos7720_port->shadowMCR |= UART_MCR_RTS; status = send_mos_cmd(port->serial, MOS_WRITE, port->number - port->serial->minor, UART_MCR, &mos7720_port->shadowMCR); if (status != 0) return; } } static int set_higher_rates(struct moschip_port *mos7720_port, unsigned int baud) { unsigned char data; struct usb_serial_port *port; struct usb_serial *serial; int port_number; if (mos7720_port == NULL) return -EINVAL; port = mos7720_port->port; serial = port->serial; /*********************************************** * Init Sequence for higher rates ***********************************************/ dbg("Sending Setting Commands .........."); port_number = port->number - port->serial->minor; data = 0x000; send_mos_cmd(serial, MOS_WRITE, port_number, 0x01, &data); data = 0x000; send_mos_cmd(serial, MOS_WRITE, port_number, 0x02, &data); data = 0x0CF; send_mos_cmd(serial, MOS_WRITE, port->number, 0x02, &data); data = 0x00b; mos7720_port->shadowMCR = data; send_mos_cmd(serial, MOS_WRITE, port_number, 0x04, &data); data = 0x00b; send_mos_cmd(serial, MOS_WRITE, port_number, 0x04, &data); data = 0x000; send_mos_cmd(serial, MOS_READ, MOS_MAX_PORT, 0x08, &data); data = 0x000; send_mos_cmd(serial, MOS_WRITE, MOS_MAX_PORT, 0x08, &data); /*********************************************** * Set for higher rates * ***********************************************/ data = baud * 0x10; send_mos_cmd(serial, MOS_WRITE, MOS_MAX_PORT, port_number + 1, &data); data = 0x003; send_mos_cmd(serial, MOS_READ, MOS_MAX_PORT, 0x08, &data); data = 0x003; send_mos_cmd(serial, MOS_WRITE, MOS_MAX_PORT, 0x08, &data); data = 0x02b; mos7720_port->shadowMCR = data; send_mos_cmd(serial, MOS_WRITE, port_number, 0x04, &data); data = 0x02b; send_mos_cmd(serial, MOS_WRITE, port_number, 0x04, &data); /*********************************************** * Set DLL/DLM ***********************************************/ data = mos7720_port->shadowLCR | UART_LCR_DLAB; mos7720_port->shadowLCR = data; send_mos_cmd(serial, MOS_WRITE, port_number, 0x03, &data); data = 0x001; /* DLL */ send_mos_cmd(serial, MOS_WRITE, port_number, 0x00, &data); data = 0x000; /* DLM */ send_mos_cmd(serial, MOS_WRITE, port_number, 0x01, &data); data = mos7720_port->shadowLCR & ~UART_LCR_DLAB; mos7720_port->shadowLCR = data; send_mos_cmd(serial, MOS_WRITE, port_number, 0x03, &data); return 0; } /* baud rate information */ struct divisor_table_entry { __u32 baudrate; __u16 divisor; }; /* Define table of divisors for moschip 7720 hardware * * These assume a 3.6864MHz crystal, the standard /16, and * * MCR.7 = 0. */ static struct divisor_table_entry divisor_table[] = { { 50, 2304}, { 110, 1047}, /* 2094.545455 => 230450 => .0217 % over */ { 134, 857}, /* 1713.011152 => 230398.5 => .00065% under */ { 150, 768}, { 300, 384}, { 600, 192}, { 1200, 96}, { 1800, 64}, { 2400, 48}, { 4800, 24}, { 7200, 16}, { 9600, 12}, { 19200, 6}, { 38400, 3}, { 57600, 2}, { 115200, 1}, }; /***************************************************************************** * calc_baud_rate_divisor * this function calculates the proper baud rate divisor for the specified * baud rate. *****************************************************************************/ static int calc_baud_rate_divisor(int baudrate, int *divisor) { int i; __u16 custom; __u16 round1; __u16 round; dbg("%s - %d", __func__, baudrate); for (i = 0; i < ARRAY_SIZE(divisor_table); i++) { if (divisor_table[i].baudrate == baudrate) { *divisor = divisor_table[i].divisor; return 0; } } /* After trying for all the standard baud rates * * Try calculating the divisor for this baud rate */ if (baudrate > 75 && baudrate < 230400) { /* get the divisor */ custom = (__u16)(230400L / baudrate); /* Check for round off */ round1 = (__u16)(2304000L / baudrate); round = (__u16)(round1 - (custom * 10)); if (round > 4) custom++; *divisor = custom; dbg("Baud %d = %d", baudrate, custom); return 0; } dbg("Baud calculation Failed..."); return -EINVAL; } /* * send_cmd_write_baud_rate * this function sends the proper command to change the baud rate of the * specified port. */ static int send_cmd_write_baud_rate(struct moschip_port *mos7720_port, int baudrate) { struct usb_serial_port *port; struct usb_serial *serial; int divisor; int status; unsigned char data; unsigned char number; if (mos7720_port == NULL) return -1; port = mos7720_port->port; serial = port->serial; dbg("%s: Entering ..........", __func__); number = port->number - port->serial->minor; dbg("%s - port = %d, baud = %d", __func__, port->number, baudrate); /* Calculate the Divisor */ status = calc_baud_rate_divisor(baudrate, &divisor); if (status) { dev_err(&port->dev, "%s - bad baud rate\n", __func__); return status; } /* Enable access to divisor latch */ data = mos7720_port->shadowLCR | UART_LCR_DLAB; mos7720_port->shadowLCR = data; send_mos_cmd(serial, MOS_WRITE, number, UART_LCR, &data); /* Write the divisor */ data = ((unsigned char)(divisor & 0xff)); send_mos_cmd(serial, MOS_WRITE, number, 0x00, &data); data = ((unsigned char)((divisor & 0xff00) >> 8)); send_mos_cmd(serial, MOS_WRITE, number, 0x01, &data); /* Disable access to divisor latch */ data = mos7720_port->shadowLCR & ~UART_LCR_DLAB; mos7720_port->shadowLCR = data; send_mos_cmd(serial, MOS_WRITE, number, 0x03, &data); return status; } /* * change_port_settings * This routine is called to set the UART on the device to match * the specified new settings. */ static void change_port_settings(struct tty_struct *tty, struct moschip_port *mos7720_port, struct ktermios *old_termios) { struct usb_serial_port *port; struct usb_serial *serial; int baud; unsigned cflag; unsigned iflag; __u8 mask = 0xff; __u8 lData; __u8 lParity; __u8 lStop; int status; int port_number; char data; if (mos7720_port == NULL) return ; port = mos7720_port->port; serial = port->serial; port_number = port->number - port->serial->minor; dbg("%s - port %d", __func__, port->number); if (!mos7720_port->open) { dbg("%s - port not opened", __func__); return; } dbg("%s: Entering ..........", __func__); lData = UART_LCR_WLEN8; lStop = 0x00; /* 1 stop bit */ lParity = 0x00; /* No parity */ cflag = tty->termios->c_cflag; iflag = tty->termios->c_iflag; /* Change the number of bits */ switch (cflag & CSIZE) { case CS5: lData = UART_LCR_WLEN5; mask = 0x1f; break; case CS6: lData = UART_LCR_WLEN6; mask = 0x3f; break; case CS7: lData = UART_LCR_WLEN7; mask = 0x7f; break; default: case CS8: lData = UART_LCR_WLEN8; break; } /* Change the Parity bit */ if (cflag & PARENB) { if (cflag & PARODD) { lParity = UART_LCR_PARITY; dbg("%s - parity = odd", __func__); } else { lParity = (UART_LCR_EPAR | UART_LCR_PARITY); dbg("%s - parity = even", __func__); } } else { dbg("%s - parity = none", __func__); } if (cflag & CMSPAR) lParity = lParity | 0x20; /* Change the Stop bit */ if (cflag & CSTOPB) { lStop = UART_LCR_STOP; dbg("%s - stop bits = 2", __func__); } else { lStop = 0x00; dbg("%s - stop bits = 1", __func__); } #define LCR_BITS_MASK 0x03 /* Mask for bits/char field */ #define LCR_STOP_MASK 0x04 /* Mask for stop bits field */ #define LCR_PAR_MASK 0x38 /* Mask for parity field */ /* Update the LCR with the correct value */ mos7720_port->shadowLCR &= ~(LCR_BITS_MASK | LCR_STOP_MASK | LCR_PAR_MASK); mos7720_port->shadowLCR |= (lData | lParity | lStop); /* Disable Interrupts */ data = 0x00; send_mos_cmd(serial, MOS_WRITE, port->number - port->serial->minor, UART_IER, &data); data = 0x00; send_mos_cmd(serial, MOS_WRITE, port_number, UART_FCR, &data); data = 0xcf; send_mos_cmd(serial, MOS_WRITE, port_number, UART_FCR, &data); /* Send the updated LCR value to the mos7720 */ data = mos7720_port->shadowLCR; send_mos_cmd(serial, MOS_WRITE, port_number, UART_LCR, &data); data = 0x00b; mos7720_port->shadowMCR = data; send_mos_cmd(serial, MOS_WRITE, port_number, 0x04, &data); data = 0x00b; send_mos_cmd(serial, MOS_WRITE, port_number, 0x04, &data); /* set up the MCR register and send it to the mos7720 */ mos7720_port->shadowMCR = UART_MCR_OUT2; if (cflag & CBAUD) mos7720_port->shadowMCR |= (UART_MCR_DTR | UART_MCR_RTS); if (cflag & CRTSCTS) { mos7720_port->shadowMCR |= (UART_MCR_XONANY); /* To set hardware flow control to the specified * * serial port, in SP1/2_CONTROL_REG */ if (port->number) { data = 0x001; send_mos_cmd(serial, MOS_WRITE, MOS_MAX_PORT, 0x08, &data); } else { data = 0x002; send_mos_cmd(serial, MOS_WRITE, MOS_MAX_PORT, 0x08, &data); } } else { mos7720_port->shadowMCR &= ~(UART_MCR_XONANY); } data = mos7720_port->shadowMCR; send_mos_cmd(serial, MOS_WRITE, port_number, UART_MCR, &data); /* Determine divisor based on baud rate */ baud = tty_get_baud_rate(tty); if (!baud) { /* pick a default, any default... */ dbg("Picked default baud..."); baud = 9600; } if (baud >= 230400) { set_higher_rates(mos7720_port, baud); /* Enable Interrupts */ data = 0x0c; send_mos_cmd(serial, MOS_WRITE, port_number, UART_IER, &data); return; } dbg("%s - baud rate = %d", __func__, baud); status = send_cmd_write_baud_rate(mos7720_port, baud); /* FIXME: needs to write actual resulting baud back not just blindly do so */ if (cflag & CBAUD) tty_encode_baud_rate(tty, baud, baud); /* Enable Interrupts */ data = 0x0c; send_mos_cmd(serial, MOS_WRITE, port_number, UART_IER, &data); if (port->read_urb->status != -EINPROGRESS) { port->read_urb->dev = serial->dev; status = usb_submit_urb(port->read_urb, GFP_ATOMIC); if (status) dbg("usb_submit_urb(read bulk) failed, status = %d", status); } return; } /* * mos7720_set_termios * this function is called by the tty driver when it wants to change the * termios structure. */ static void mos7720_set_termios(struct tty_struct *tty, struct usb_serial_port *port, struct ktermios *old_termios) { int status; unsigned int cflag; struct usb_serial *serial; struct moschip_port *mos7720_port; serial = port->serial; mos7720_port = usb_get_serial_port_data(port); if (mos7720_port == NULL) return; if (!mos7720_port->open) { dbg("%s - port not opened", __func__); return; } dbg("%s\n", "setting termios - ASPIRE"); cflag = tty->termios->c_cflag; dbg("%s - cflag %08x iflag %08x", __func__, tty->termios->c_cflag, RELEVANT_IFLAG(tty->termios->c_iflag)); dbg("%s - old cflag %08x old iflag %08x", __func__, old_termios->c_cflag, RELEVANT_IFLAG(old_termios->c_iflag)); dbg("%s - port %d", __func__, port->number); /* change the port settings to the new ones specified */ change_port_settings(tty, mos7720_port, old_termios); if (!port->read_urb) { dbg("%s", "URB KILLED !!!!!\n"); return; } if (port->read_urb->status != -EINPROGRESS) { port->read_urb->dev = serial->dev; status = usb_submit_urb(port->read_urb, GFP_ATOMIC); if (status) dbg("usb_submit_urb(read bulk) failed, status = %d", status); } return; } /* * get_lsr_info - get line status register info * * Purpose: Let user call ioctl() to get info when the UART physically * is emptied. On bus types like RS485, the transmitter must * release the bus after transmitting. This must be done when * the transmit shift register is empty, not be done when the * transmit holding register is empty. This functionality * allows an RS485 driver to be written in user space. */ static int get_lsr_info(struct tty_struct *tty, struct moschip_port *mos7720_port, unsigned int __user *value) { int count; unsigned int result = 0; count = mos7720_chars_in_buffer(tty); if (count == 0) { dbg("%s -- Empty", __func__); result = TIOCSER_TEMT; } if (copy_to_user(value, &result, sizeof(int))) return -EFAULT; return 0; } static int set_modem_info(struct moschip_port *mos7720_port, unsigned int cmd, unsigned int __user *value) { unsigned int mcr ; unsigned int arg; unsigned char data; struct usb_serial_port *port; if (mos7720_port == NULL) return -1; port = (struct usb_serial_port *)mos7720_port->port; mcr = mos7720_port->shadowMCR; if (copy_from_user(&arg, value, sizeof(int))) return -EFAULT; switch (cmd) { case TIOCMBIS: if (arg & TIOCM_RTS) mcr |= UART_MCR_RTS; if (arg & TIOCM_DTR) mcr |= UART_MCR_RTS; if (arg & TIOCM_LOOP) mcr |= UART_MCR_LOOP; break; case TIOCMBIC: if (arg & TIOCM_RTS) mcr &= ~UART_MCR_RTS; if (arg & TIOCM_DTR) mcr &= ~UART_MCR_RTS; if (arg & TIOCM_LOOP) mcr &= ~UART_MCR_LOOP; break; case TIOCMSET: /* turn off the RTS and DTR and LOOPBACK * and then only turn on what was asked to */ mcr &= ~(UART_MCR_RTS | UART_MCR_DTR | UART_MCR_LOOP); mcr |= ((arg & TIOCM_RTS) ? UART_MCR_RTS : 0); mcr |= ((arg & TIOCM_DTR) ? UART_MCR_DTR : 0); mcr |= ((arg & TIOCM_LOOP) ? UART_MCR_LOOP : 0); break; } mos7720_port->shadowMCR = mcr; data = mos7720_port->shadowMCR; send_mos_cmd(port->serial, MOS_WRITE, port->number - port->serial->minor, UART_MCR, &data); return 0; } static int get_modem_info(struct moschip_port *mos7720_port, unsigned int __user *value) { unsigned int result = 0; unsigned int msr = mos7720_port->shadowMSR; unsigned int mcr = mos7720_port->shadowMCR; result = ((mcr & UART_MCR_DTR) ? TIOCM_DTR: 0) /* 0x002 */ | ((mcr & UART_MCR_RTS) ? TIOCM_RTS: 0) /* 0x004 */ | ((msr & UART_MSR_CTS) ? TIOCM_CTS: 0) /* 0x020 */ | ((msr & UART_MSR_DCD) ? TIOCM_CAR: 0) /* 0x040 */ | ((msr & UART_MSR_RI) ? TIOCM_RI: 0) /* 0x080 */ | ((msr & UART_MSR_DSR) ? TIOCM_DSR: 0); /* 0x100 */ dbg("%s -- %x", __func__, result); if (copy_to_user(value, &result, sizeof(int))) return -EFAULT; return 0; } static int get_serial_info(struct moschip_port *mos7720_port, struct serial_struct __user *retinfo) { struct serial_struct tmp; if (!retinfo) return -EFAULT; memset(&tmp, 0, sizeof(tmp)); tmp.type = PORT_16550A; tmp.line = mos7720_port->port->serial->minor; tmp.port = mos7720_port->port->number; tmp.irq = 0; tmp.flags = ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ; tmp.xmit_fifo_size = NUM_URBS * URB_TRANSFER_BUFFER_SIZE; tmp.baud_base = 9600; tmp.close_delay = 5*HZ; tmp.closing_wait = 30*HZ; if (copy_to_user(retinfo, &tmp, sizeof(*retinfo))) return -EFAULT; return 0; } static int mos7720_ioctl(struct tty_struct *tty, struct file *file, unsigned int cmd, unsigned long arg) { struct usb_serial_port *port = tty->driver_data; struct moschip_port *mos7720_port; struct async_icount cnow; struct async_icount cprev; struct serial_icounter_struct icount; mos7720_port = usb_get_serial_port_data(port); if (mos7720_port == NULL) return -ENODEV; dbg("%s - port %d, cmd = 0x%x", __func__, port->number, cmd); switch (cmd) { case TIOCSERGETLSR: dbg("%s (%d) TIOCSERGETLSR", __func__, port->number); return get_lsr_info(tty, mos7720_port, (unsigned int __user *)arg); return 0; /* FIXME: These should be using the mode methods */ case TIOCMBIS: case TIOCMBIC: case TIOCMSET: dbg("%s (%d) TIOCMSET/TIOCMBIC/TIOCMSET", __func__, port->number); return set_modem_info(mos7720_port, cmd, (unsigned int __user *)arg); case TIOCMGET: dbg("%s (%d) TIOCMGET", __func__, port->number); return get_modem_info(mos7720_port, (unsigned int __user *)arg); case TIOCGSERIAL: dbg("%s (%d) TIOCGSERIAL", __func__, port->number); return get_serial_info(mos7720_port, (struct serial_struct __user *)arg); case TIOCMIWAIT: dbg("%s (%d) TIOCMIWAIT", __func__, port->number); cprev = mos7720_port->icount; while (1) { if (signal_pending(current)) return -ERESTARTSYS; cnow = mos7720_port->icount; if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr && cnow.dcd == cprev.dcd && cnow.cts == cprev.cts) return -EIO; /* no change => error */ if (((arg & TIOCM_RNG) && (cnow.rng != cprev.rng)) || ((arg & TIOCM_DSR) && (cnow.dsr != cprev.dsr)) || ((arg & TIOCM_CD) && (cnow.dcd != cprev.dcd)) || ((arg & TIOCM_CTS) && (cnow.cts != cprev.cts))) { return 0; } cprev = cnow; } /* NOTREACHED */ break; case TIOCGICOUNT: cnow = mos7720_port->icount; icount.cts = cnow.cts; icount.dsr = cnow.dsr; icount.rng = cnow.rng; icount.dcd = cnow.dcd; icount.rx = cnow.rx; icount.tx = cnow.tx; icount.frame = cnow.frame; icount.overrun = cnow.overrun; icount.parity = cnow.parity; icount.brk = cnow.brk; icount.buf_overrun = cnow.buf_overrun; dbg("%s (%d) TIOCGICOUNT RX=%d, TX=%d", __func__, port->number, icount.rx, icount.tx); if (copy_to_user((void __user *)arg, &icount, sizeof(icount))) return -EFAULT; return 0; } return -ENOIOCTLCMD; } static int mos7720_startup(struct usb_serial *serial) { struct moschip_serial *mos7720_serial; struct moschip_port *mos7720_port; struct usb_device *dev; int i; char data; dbg("%s: Entering ..........", __func__); if (!serial) { dbg("Invalid Handler"); return -ENODEV; } dev = serial->dev; /* create our private serial structure */ mos7720_serial = kzalloc(sizeof(struct moschip_serial), GFP_KERNEL); if (mos7720_serial == NULL) { dev_err(&dev->dev, "%s - Out of memory\n", __func__); return -ENOMEM; } usb_set_serial_data(serial, mos7720_serial); /* we set up the pointers to the endpoints in the mos7720_open * * function, as the structures aren't created yet. */ /* set up port private structures */ for (i = 0; i < serial->num_ports; ++i) { mos7720_port = kzalloc(sizeof(struct moschip_port), GFP_KERNEL); if (mos7720_port == NULL) { dev_err(&dev->dev, "%s - Out of memory\n", __func__); usb_set_serial_data(serial, NULL); kfree(mos7720_serial); return -ENOMEM; } /* Initialize all port interrupt end point to port 0 int * endpoint. Our device has only one interrupt endpoint * comman to all ports */ serial->port[i]->interrupt_in_endpointAddress = serial->port[0]->interrupt_in_endpointAddress; mos7720_port->port = serial->port[i]; usb_set_serial_port_data(serial->port[i], mos7720_port); dbg("port number is %d", serial->port[i]->number); dbg("serial number is %d", serial->minor); } /* setting configuration feature to one */ usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), (__u8)0x03, 0x00, 0x01, 0x00, NULL, 0x00, 5*HZ); /* LSR For Port 1 */ send_mos_cmd(serial, MOS_READ, 0x00, UART_LSR, &data); dbg("LSR:%x", data); /* LSR For Port 2 */ send_mos_cmd(serial, MOS_READ, 0x01, UART_LSR, &data); dbg("LSR:%x", data); return 0; } static void mos7720_shutdown(struct usb_serial *serial) { int i; /* free private structure allocated for serial port */ for (i = 0; i < serial->num_ports; ++i) { kfree(usb_get_serial_port_data(serial->port[i])); usb_set_serial_port_data(serial->port[i], NULL); } /* free private structure allocated for serial device */ kfree(usb_get_serial_data(serial)); usb_set_serial_data(serial, NULL); } static struct usb_driver usb_driver = { .name = "moschip7720", .probe = usb_serial_probe, .disconnect = usb_serial_disconnect, .id_table = moschip_port_id_table, .no_dynamic_id = 1, }; static struct usb_serial_driver moschip7720_2port_driver = { .driver = { .owner = THIS_MODULE, .name = "moschip7720", }, .description = "Moschip 2 port adapter", .usb_driver = &usb_driver, .id_table = moschip_port_id_table, .num_ports = 2, .open = mos7720_open, .close = mos7720_close, .throttle = mos7720_throttle, .unthrottle = mos7720_unthrottle, .attach = mos7720_startup, .shutdown = mos7720_shutdown, .ioctl = mos7720_ioctl, .set_termios = mos7720_set_termios, .write = mos7720_write, .write_room = mos7720_write_room, .chars_in_buffer = mos7720_chars_in_buffer, .break_ctl = mos7720_break, .read_bulk_callback = mos7720_bulk_in_callback, .read_int_callback = mos7720_interrupt_callback, }; static int __init moschip7720_init(void) { int retval; dbg("%s: Entering ..........", __func__); /* Register with the usb serial */ retval = usb_serial_register(&moschip7720_2port_driver); if (retval) goto failed_port_device_register; printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":" DRIVER_DESC "\n"); /* Register with the usb */ retval = usb_register(&usb_driver); if (retval) goto failed_usb_register; return 0; failed_usb_register: usb_serial_deregister(&moschip7720_2port_driver); failed_port_device_register: return retval; } static void __exit moschip7720_exit(void) { usb_deregister(&usb_driver); usb_serial_deregister(&moschip7720_2port_driver); } module_init(moschip7720_init); module_exit(moschip7720_exit); /* Module information */ MODULE_AUTHOR(DRIVER_AUTHOR); MODULE_DESCRIPTION(DRIVER_DESC); MODULE_LICENSE("GPL"); module_param(debug, bool, S_IRUGO | S_IWUSR); MODULE_PARM_DESC(debug, "Debug enabled or not");