/* * zero.c -- Gadget Zero, for USB development * * Copyright (C) 2003-2004 David Brownell * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions, and the following disclaimer, * without modification. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. The names of the above-listed copyright holders may not be used * to endorse or promote products derived from this software without * specific prior written permission. * * ALTERNATIVELY, this software may be distributed under the terms of the * GNU General Public License ("GPL") as published by the Free Software * Foundation, either version 2 of that License or (at your option) any * later version. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ /* * Gadget Zero only needs two bulk endpoints, and is an example of how you * can write a hardware-agnostic gadget driver running inside a USB device. * * Hardware details are visible (see CONFIG_USB_ZERO_* below) but don't * affect most of the driver. * * Use it with the Linux host/master side "usbtest" driver to get a basic * functional test of your device-side usb stack, or with "usb-skeleton". * * It supports two similar configurations. One sinks whatever the usb host * writes, and in return sources zeroes. The other loops whatever the host * writes back, so the host can read it. Module options include: * * buflen=N default N=4096, buffer size used * qlen=N default N=32, how many buffers in the loopback queue * loopdefault default false, list loopback config first * * Many drivers will only have one configuration, letting them be much * simpler if they also don't support high speed operation (like this * driver does). */ #define DEBUG 1 // #define VERBOSE #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "gadget_chips.h" /*-------------------------------------------------------------------------*/ #define DRIVER_VERSION "St Patrick's Day 2004" static const char shortname [] = "zero"; static const char longname [] = "Gadget Zero"; static const char source_sink [] = "source and sink data"; static const char loopback [] = "loop input to output"; /*-------------------------------------------------------------------------*/ /* * driver assumes self-powered hardware, and * has no way for users to trigger remote wakeup. * * this version autoconfigures as much as possible, * which is reasonable for most "bulk-only" drivers. */ static const char *EP_IN_NAME; /* source */ static const char *EP_OUT_NAME; /* sink */ /*-------------------------------------------------------------------------*/ /* big enough to hold our biggest descriptor */ #define USB_BUFSIZ 256 struct zero_dev { spinlock_t lock; struct usb_gadget *gadget; struct usb_request *req; /* for control responses */ /* when configured, we have one of two configs: * - source data (in to host) and sink it (out from host) * - or loop it back (out from host back in to host) */ u8 config; struct usb_ep *in_ep, *out_ep; /* autoresume timer */ struct timer_list resume; }; #define xprintk(d,level,fmt,args...) \ dev_printk(level , &(d)->gadget->dev , fmt , ## args) #ifdef DEBUG #define DBG(dev,fmt,args...) \ xprintk(dev , KERN_DEBUG , fmt , ## args) #else #define DBG(dev,fmt,args...) \ do { } while (0) #endif /* DEBUG */ #ifdef VERBOSE #define VDBG DBG #else #define VDBG(dev,fmt,args...) \ do { } while (0) #endif /* VERBOSE */ #define ERROR(dev,fmt,args...) \ xprintk(dev , KERN_ERR , fmt , ## args) #define WARN(dev,fmt,args...) \ xprintk(dev , KERN_WARNING , fmt , ## args) #define INFO(dev,fmt,args...) \ xprintk(dev , KERN_INFO , fmt , ## args) /*-------------------------------------------------------------------------*/ static unsigned buflen = 4096; static unsigned qlen = 32; static unsigned pattern = 0; module_param (buflen, uint, S_IRUGO); module_param (qlen, uint, S_IRUGO); module_param (pattern, uint, S_IRUGO|S_IWUSR); /* * if it's nonzero, autoresume says how many seconds to wait * before trying to wake up the host after suspend. */ static unsigned autoresume = 0; module_param (autoresume, uint, 0); /* * Normally the "loopback" configuration is second (index 1) so * it's not the default. Here's where to change that order, to * work better with hosts where config changes are problematic. * Or controllers (like superh) that only support one config. */ static int loopdefault = 0; module_param (loopdefault, bool, S_IRUGO|S_IWUSR); /*-------------------------------------------------------------------------*/ /* Thanks to NetChip Technologies for donating this product ID. * * DO NOT REUSE THESE IDs with a protocol-incompatible driver!! Ever!! * Instead: allocate your own, using normal USB-IF procedures. */ #ifndef CONFIG_USB_ZERO_HNPTEST #define DRIVER_VENDOR_NUM 0x0525 /* NetChip */ #define DRIVER_PRODUCT_NUM 0xa4a0 /* Linux-USB "Gadget Zero" */ #else #define DRIVER_VENDOR_NUM 0x1a0a /* OTG test device IDs */ #define DRIVER_PRODUCT_NUM 0xbadd #endif /*-------------------------------------------------------------------------*/ /* * DESCRIPTORS ... most are static, but strings and (full) * configuration descriptors are built on demand. */ #define STRING_MANUFACTURER 25 #define STRING_PRODUCT 42 #define STRING_SERIAL 101 #define STRING_SOURCE_SINK 250 #define STRING_LOOPBACK 251 /* * This device advertises two configurations; these numbers work * on a pxa250 as well as more flexible hardware. */ #define CONFIG_SOURCE_SINK 3 #define CONFIG_LOOPBACK 2 static struct usb_device_descriptor device_desc = { .bLength = sizeof device_desc, .bDescriptorType = USB_DT_DEVICE, .bcdUSB = __constant_cpu_to_le16 (0x0200), .bDeviceClass = USB_CLASS_VENDOR_SPEC, .idVendor = __constant_cpu_to_le16 (DRIVER_VENDOR_NUM), .idProduct = __constant_cpu_to_le16 (DRIVER_PRODUCT_NUM), .iManufacturer = STRING_MANUFACTURER, .iProduct = STRING_PRODUCT, .iSerialNumber = STRING_SERIAL, .bNumConfigurations = 2, }; static struct usb_config_descriptor source_sink_config = { .bLength = sizeof source_sink_config, .bDescriptorType = USB_DT_CONFIG, /* compute wTotalLength on the fly */ .bNumInterfaces = 1, .bConfigurationValue = CONFIG_SOURCE_SINK, .iConfiguration = STRING_SOURCE_SINK, .bmAttributes = USB_CONFIG_ATT_ONE | USB_CONFIG_ATT_SELFPOWER, .bMaxPower = 1, /* self-powered */ }; static struct usb_config_descriptor loopback_config = { .bLength = sizeof loopback_config, .bDescriptorType = USB_DT_CONFIG, /* compute wTotalLength on the fly */ .bNumInterfaces = 1, .bConfigurationValue = CONFIG_LOOPBACK, .iConfiguration = STRING_LOOPBACK, .bmAttributes = USB_CONFIG_ATT_ONE | USB_CONFIG_ATT_SELFPOWER, .bMaxPower = 1, /* self-powered */ }; static struct usb_otg_descriptor otg_descriptor = { .bLength = sizeof otg_descriptor, .bDescriptorType = USB_DT_OTG, .bmAttributes = USB_OTG_SRP, }; /* one interface in each configuration */ static const struct usb_interface_descriptor source_sink_intf = { .bLength = sizeof source_sink_intf, .bDescriptorType = USB_DT_INTERFACE, .bNumEndpoints = 2, .bInterfaceClass = USB_CLASS_VENDOR_SPEC, .iInterface = STRING_SOURCE_SINK, }; static const struct usb_interface_descriptor loopback_intf = { .bLength = sizeof loopback_intf, .bDescriptorType = USB_DT_INTERFACE, .bNumEndpoints = 2, .bInterfaceClass = USB_CLASS_VENDOR_SPEC, .iInterface = STRING_LOOPBACK, }; /* two full speed bulk endpoints; their use is config-dependent */ static struct usb_endpoint_descriptor fs_source_desc = { .bLength = USB_DT_ENDPOINT_SIZE, .bDescriptorType = USB_DT_ENDPOINT, .bEndpointAddress = USB_DIR_IN, .bmAttributes = USB_ENDPOINT_XFER_BULK, }; static struct usb_endpoint_descriptor fs_sink_desc = { .bLength = USB_DT_ENDPOINT_SIZE, .bDescriptorType = USB_DT_ENDPOINT, .bEndpointAddress = USB_DIR_OUT, .bmAttributes = USB_ENDPOINT_XFER_BULK, }; static const struct usb_descriptor_header *fs_source_sink_function [] = { (struct usb_descriptor_header *) &otg_descriptor, (struct usb_descriptor_header *) &source_sink_intf, (struct usb_descriptor_header *) &fs_sink_desc, (struct usb_descriptor_header *) &fs_source_desc, NULL, }; static const struct usb_descriptor_header *fs_loopback_function [] = { (struct usb_descriptor_header *) &otg_descriptor, (struct usb_descriptor_header *) &loopback_intf, (struct usb_descriptor_header *) &fs_sink_desc, (struct usb_descriptor_header *) &fs_source_desc, NULL, }; #ifdef CONFIG_USB_GADGET_DUALSPEED /* * usb 2.0 devices need to expose both high speed and full speed * descriptors, unless they only run at full speed. * * that means alternate endpoint descriptors (bigger packets) * and a "device qualifier" ... plus more construction options * for the config descriptor. */ static struct usb_endpoint_descriptor hs_source_desc = { .bLength = USB_DT_ENDPOINT_SIZE, .bDescriptorType = USB_DT_ENDPOINT, .bmAttributes = USB_ENDPOINT_XFER_BULK, .wMaxPacketSize = __constant_cpu_to_le16 (512), }; static struct usb_endpoint_descriptor hs_sink_desc = { .bLength = USB_DT_ENDPOINT_SIZE, .bDescriptorType = USB_DT_ENDPOINT, .bmAttributes = USB_ENDPOINT_XFER_BULK, .wMaxPacketSize = __constant_cpu_to_le16 (512), }; static struct usb_qualifier_descriptor dev_qualifier = { .bLength = sizeof dev_qualifier, .bDescriptorType = USB_DT_DEVICE_QUALIFIER, .bcdUSB = __constant_cpu_to_le16 (0x0200), .bDeviceClass = USB_CLASS_VENDOR_SPEC, .bNumConfigurations = 2, }; static const struct usb_descriptor_header *hs_source_sink_function [] = { (struct usb_descriptor_header *) &otg_descriptor, (struct usb_descriptor_header *) &source_sink_intf, (struct usb_descriptor_header *) &hs_source_desc, (struct usb_descriptor_header *) &hs_sink_desc, NULL, }; static const struct usb_descriptor_header *hs_loopback_function [] = { (struct usb_descriptor_header *) &otg_descriptor, (struct usb_descriptor_header *) &loopback_intf, (struct usb_descriptor_header *) &hs_source_desc, (struct usb_descriptor_header *) &hs_sink_desc, NULL, }; /* maxpacket and other transfer characteristics vary by speed. */ #define ep_desc(g,hs,fs) (((g)->speed==USB_SPEED_HIGH)?(hs):(fs)) #else /* if there's no high speed support, maxpacket doesn't change. */ #define ep_desc(g,hs,fs) fs #endif /* !CONFIG_USB_GADGET_DUALSPEED */ static char manufacturer [50]; static char serial [40]; /* static strings, in UTF-8 */ static struct usb_string strings [] = { { STRING_MANUFACTURER, manufacturer, }, { STRING_PRODUCT, longname, }, { STRING_SERIAL, serial, }, { STRING_LOOPBACK, loopback, }, { STRING_SOURCE_SINK, source_sink, }, { } /* end of list */ }; static struct usb_gadget_strings stringtab = { .language = 0x0409, /* en-us */ .strings = strings, }; /* * config descriptors are also handcrafted. these must agree with code * that sets configurations, and with code managing interfaces and their * altsettings. other complexity may come from: * * - high speed support, including "other speed config" rules * - multiple configurations * - interfaces with alternate settings * - embedded class or vendor-specific descriptors * * this handles high speed, and has a second config that could as easily * have been an alternate interface setting (on most hardware). * * NOTE: to demonstrate (and test) more USB capabilities, this driver * should include an altsetting to test interrupt transfers, including * high bandwidth modes at high speed. (Maybe work like Intel's test * device?) */ static int config_buf (struct usb_gadget *gadget, u8 *buf, u8 type, unsigned index) { int is_source_sink; int len; const struct usb_descriptor_header **function; #ifdef CONFIG_USB_GADGET_DUALSPEED int hs = (gadget->speed == USB_SPEED_HIGH); #endif /* two configurations will always be index 0 and index 1 */ if (index > 1) return -EINVAL; is_source_sink = loopdefault ? (index == 1) : (index == 0); #ifdef CONFIG_USB_GADGET_DUALSPEED if (type == USB_DT_OTHER_SPEED_CONFIG) hs = !hs; if (hs) function = is_source_sink ? hs_source_sink_function : hs_loopback_function; else #endif function = is_source_sink ? fs_source_sink_function : fs_loopback_function; /* for now, don't advertise srp-only devices */ if (!gadget->is_otg) function++; len = usb_gadget_config_buf (is_source_sink ? &source_sink_config : &loopback_config, buf, USB_BUFSIZ, function); if (len < 0) return len; ((struct usb_config_descriptor *) buf)->bDescriptorType = type; return len; } /*-------------------------------------------------------------------------*/ static struct usb_request * alloc_ep_req (struct usb_ep *ep, unsigned length) { struct usb_request *req; req = usb_ep_alloc_request (ep, GFP_ATOMIC); if (req) { req->length = length; req->buf = usb_ep_alloc_buffer (ep, length, &req->dma, GFP_ATOMIC); if (!req->buf) { usb_ep_free_request (ep, req); req = NULL; } } return req; } static void free_ep_req (struct usb_ep *ep, struct usb_request *req) { if (req->buf) usb_ep_free_buffer (ep, req->buf, req->dma, req->length); usb_ep_free_request (ep, req); } /*-------------------------------------------------------------------------*/ /* optionally require specific source/sink data patterns */ static int check_read_data ( struct zero_dev *dev, struct usb_ep *ep, struct usb_request *req ) { unsigned i; u8 *buf = req->buf; for (i = 0; i < req->actual; i++, buf++) { switch (pattern) { /* all-zeroes has no synchronization issues */ case 0: if (*buf == 0) continue; break; /* mod63 stays in sync with short-terminated transfers, * or otherwise when host and gadget agree on how large * each usb transfer request should be. resync is done * with set_interface or set_config. */ case 1: if (*buf == (u8)(i % 63)) continue; break; } ERROR (dev, "bad OUT byte, buf [%d] = %d\n", i, *buf); usb_ep_set_halt (ep); return -EINVAL; } return 0; } static void reinit_write_data ( struct zero_dev *dev, struct usb_ep *ep, struct usb_request *req ) { unsigned i; u8 *buf = req->buf; switch (pattern) { case 0: memset (req->buf, 0, req->length); break; case 1: for (i = 0; i < req->length; i++) *buf++ = (u8) (i % 63); break; } } /* if there is only one request in the queue, there'll always be an * irq delay between end of one request and start of the next. * that prevents using hardware dma queues. */ static void source_sink_complete (struct usb_ep *ep, struct usb_request *req) { struct zero_dev *dev = ep->driver_data; int status = req->status; switch (status) { case 0: /* normal completion? */ if (ep == dev->out_ep) { check_read_data (dev, ep, req); memset (req->buf, 0x55, req->length); } else reinit_write_data (dev, ep, req); break; /* this endpoint is normally active while we're configured */ case -ECONNABORTED: /* hardware forced ep reset */ case -ECONNRESET: /* request dequeued */ case -ESHUTDOWN: /* disconnect from host */ VDBG (dev, "%s gone (%d), %d/%d\n", ep->name, status, req->actual, req->length); if (ep == dev->out_ep) check_read_data (dev, ep, req); free_ep_req (ep, req); return; case -EOVERFLOW: /* buffer overrun on read means that * we didn't provide a big enough * buffer. */ default: #if 1 DBG (dev, "%s complete --> %d, %d/%d\n", ep->name, status, req->actual, req->length); #endif case -EREMOTEIO: /* short read */ break; } status = usb_ep_queue (ep, req, GFP_ATOMIC); if (status) { ERROR (dev, "kill %s: resubmit %d bytes --> %d\n", ep->name, req->length, status); usb_ep_set_halt (ep); /* FIXME recover later ... somehow */ } } static struct usb_request * source_sink_start_ep (struct usb_ep *ep, gfp_t gfp_flags) { struct usb_request *req; int status; req = alloc_ep_req (ep, buflen); if (!req) return NULL; memset (req->buf, 0, req->length); req->complete = source_sink_complete; if (strcmp (ep->name, EP_IN_NAME) == 0) reinit_write_data (ep->driver_data, ep, req); else memset (req->buf, 0x55, req->length); status = usb_ep_queue (ep, req, gfp_flags); if (status) { struct zero_dev *dev = ep->driver_data; ERROR (dev, "start %s --> %d\n", ep->name, status); free_ep_req (ep, req); req = NULL; } return req; } static int set_source_sink_config (struct zero_dev *dev, gfp_t gfp_flags) { int result = 0; struct usb_ep *ep; struct usb_gadget *gadget = dev->gadget; gadget_for_each_ep (ep, gadget) { const struct usb_endpoint_descriptor *d; /* one endpoint writes (sources) zeroes in (to the host) */ if (strcmp (ep->name, EP_IN_NAME) == 0) { d = ep_desc (gadget, &hs_source_desc, &fs_source_desc); result = usb_ep_enable (ep, d); if (result == 0) { ep->driver_data = dev; if (source_sink_start_ep (ep, gfp_flags) != 0) { dev->in_ep = ep; continue; } usb_ep_disable (ep); result = -EIO; } /* one endpoint reads (sinks) anything out (from the host) */ } else if (strcmp (ep->name, EP_OUT_NAME) == 0) { d = ep_desc (gadget, &hs_sink_desc, &fs_sink_desc); result = usb_ep_enable (ep, d); if (result == 0) { ep->driver_data = dev; if (source_sink_start_ep (ep, gfp_flags) != 0) { dev->out_ep = ep; continue; } usb_ep_disable (ep); result = -EIO; } /* ignore any other endpoints */ } else continue; /* stop on error */ ERROR (dev, "can't start %s, result %d\n", ep->name, result); break; } if (result == 0) DBG (dev, "buflen %d\n", buflen); /* caller is responsible for cleanup on error */ return result; } /*-------------------------------------------------------------------------*/ static void loopback_complete (struct usb_ep *ep, struct usb_request *req) { struct zero_dev *dev = ep->driver_data; int status = req->status; switch (status) { case 0: /* normal completion? */ if (ep == dev->out_ep) { /* loop this OUT packet back IN to the host */ req->zero = (req->actual < req->length); req->length = req->actual; status = usb_ep_queue (dev->in_ep, req, GFP_ATOMIC); if (status == 0) return; /* "should never get here" */ ERROR (dev, "can't loop %s to %s: %d\n", ep->name, dev->in_ep->name, status); } /* queue the buffer for some later OUT packet */ req->length = buflen; status = usb_ep_queue (dev->out_ep, req, GFP_ATOMIC); if (status == 0) return; /* "should never get here" */ /* FALLTHROUGH */ default: ERROR (dev, "%s loop complete --> %d, %d/%d\n", ep->name, status, req->actual, req->length); /* FALLTHROUGH */ /* NOTE: since this driver doesn't maintain an explicit record * of requests it submitted (just maintains qlen count), we * rely on the hardware driver to clean up on disconnect or * endpoint disable. */ case -ECONNABORTED: /* hardware forced ep reset */ case -ECONNRESET: /* request dequeued */ case -ESHUTDOWN: /* disconnect from host */ free_ep_req (ep, req); return; } } static int set_loopback_config (struct zero_dev *dev, gfp_t gfp_flags) { int result = 0; struct usb_ep *ep; struct usb_gadget *gadget = dev->gadget; gadget_for_each_ep (ep, gadget) { const struct usb_endpoint_descriptor *d; /* one endpoint writes data back IN to the host */ if (strcmp (ep->name, EP_IN_NAME) == 0) { d = ep_desc (gadget, &hs_source_desc, &fs_source_desc); result = usb_ep_enable (ep, d); if (result == 0) { ep->driver_data = dev; dev->in_ep = ep; continue; } /* one endpoint just reads OUT packets */ } else if (strcmp (ep->name, EP_OUT_NAME) == 0) { d = ep_desc (gadget, &hs_sink_desc, &fs_sink_desc); result = usb_ep_enable (ep, d); if (result == 0) { ep->driver_data = dev; dev->out_ep = ep; continue; } /* ignore any other endpoints */ } else continue; /* stop on error */ ERROR (dev, "can't enable %s, result %d\n", ep->name, result); break; } /* allocate a bunch of read buffers and queue them all at once. * we buffer at most 'qlen' transfers; fewer if any need more * than 'buflen' bytes each. */ if (result == 0) { struct usb_request *req; unsigned i; ep = dev->out_ep; for (i = 0; i < qlen && result == 0; i++) { req = alloc_ep_req (ep, buflen); if (req) { req->complete = loopback_complete; result = usb_ep_queue (ep, req, GFP_ATOMIC); if (result) DBG (dev, "%s queue req --> %d\n", ep->name, result); } else result = -ENOMEM; } } if (result == 0) DBG (dev, "qlen %d, buflen %d\n", qlen, buflen); /* caller is responsible for cleanup on error */ return result; } /*-------------------------------------------------------------------------*/ static void zero_reset_config (struct zero_dev *dev) { if (dev->config == 0) return; DBG (dev, "reset config\n"); /* just disable endpoints, forcing completion of pending i/o. * all our completion handlers free their requests in this case. */ if (dev->in_ep) { usb_ep_disable (dev->in_ep); dev->in_ep = NULL; } if (dev->out_ep) { usb_ep_disable (dev->out_ep); dev->out_ep = NULL; } dev->config = 0; del_timer (&dev->resume); } /* change our operational config. this code must agree with the code * that returns config descriptors, and altsetting code. * * it's also responsible for power management interactions. some * configurations might not work with our current power sources. * * note that some device controller hardware will constrain what this * code can do, perhaps by disallowing more than one configuration or * by limiting configuration choices (like the pxa2xx). */ static int zero_set_config (struct zero_dev *dev, unsigned number, gfp_t gfp_flags) { int result = 0; struct usb_gadget *gadget = dev->gadget; if (number == dev->config) return 0; if (gadget_is_sa1100 (gadget) && dev->config) { /* tx fifo is full, but we can't clear it...*/ INFO (dev, "can't change configurations\n"); return -ESPIPE; } zero_reset_config (dev); switch (number) { case CONFIG_SOURCE_SINK: result = set_source_sink_config (dev, gfp_flags); break; case CONFIG_LOOPBACK: result = set_loopback_config (dev, gfp_flags); break; default: result = -EINVAL; /* FALL THROUGH */ case 0: return result; } if (!result && (!dev->in_ep || !dev->out_ep)) result = -ENODEV; if (result) zero_reset_config (dev); else { char *speed; switch (gadget->speed) { case USB_SPEED_LOW: speed = "low"; break; case USB_SPEED_FULL: speed = "full"; break; case USB_SPEED_HIGH: speed = "high"; break; default: speed = "?"; break; } dev->config = number; INFO (dev, "%s speed config #%d: %s\n", speed, number, (number == CONFIG_SOURCE_SINK) ? source_sink : loopback); } return result; } /*-------------------------------------------------------------------------*/ static void zero_setup_complete (struct usb_ep *ep, struct usb_request *req) { if (req->status || req->actual != req->length) DBG ((struct zero_dev *) ep->driver_data, "setup complete --> %d, %d/%d\n", req->status, req->actual, req->length); } /* * The setup() callback implements all the ep0 functionality that's * not handled lower down, in hardware or the hardware driver (like * device and endpoint feature flags, and their status). It's all * housekeeping for the gadget function we're implementing. Most of * the work is in config-specific setup. */ static int zero_setup (struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl) { struct zero_dev *dev = get_gadget_data (gadget); struct usb_request *req = dev->req; int value = -EOPNOTSUPP; u16 w_index = le16_to_cpu(ctrl->wIndex); u16 w_value = le16_to_cpu(ctrl->wValue); u16 w_length = le16_to_cpu(ctrl->wLength); /* usually this stores reply data in the pre-allocated ep0 buffer, * but config change events will reconfigure hardware. */ req->zero = 0; switch (ctrl->bRequest) { case USB_REQ_GET_DESCRIPTOR: if (ctrl->bRequestType != USB_DIR_IN) goto unknown; switch (w_value >> 8) { case USB_DT_DEVICE: value = min (w_length, (u16) sizeof device_desc); memcpy (req->buf, &device_desc, value); break; #ifdef CONFIG_USB_GADGET_DUALSPEED case USB_DT_DEVICE_QUALIFIER: if (!gadget->is_dualspeed) break; value = min (w_length, (u16) sizeof dev_qualifier); memcpy (req->buf, &dev_qualifier, value); break; case USB_DT_OTHER_SPEED_CONFIG: if (!gadget->is_dualspeed) break; // FALLTHROUGH #endif /* CONFIG_USB_GADGET_DUALSPEED */ case USB_DT_CONFIG: value = config_buf (gadget, req->buf, w_value >> 8, w_value & 0xff); if (value >= 0) value = min (w_length, (u16) value); break; case USB_DT_STRING: /* wIndex == language code. * this driver only handles one language, you can * add string tables for other languages, using * any UTF-8 characters */ value = usb_gadget_get_string (&stringtab, w_value & 0xff, req->buf); if (value >= 0) value = min (w_length, (u16) value); break; } break; /* currently two configs, two speeds */ case USB_REQ_SET_CONFIGURATION: if (ctrl->bRequestType != 0) goto unknown; if (gadget->a_hnp_support) DBG (dev, "HNP available\n"); else if (gadget->a_alt_hnp_support) DBG (dev, "HNP needs a different root port\n"); else VDBG (dev, "HNP inactive\n"); spin_lock (&dev->lock); value = zero_set_config (dev, w_value, GFP_ATOMIC); spin_unlock (&dev->lock); break; case USB_REQ_GET_CONFIGURATION: if (ctrl->bRequestType != USB_DIR_IN) goto unknown; *(u8 *)req->buf = dev->config; value = min (w_length, (u16) 1); break; /* until we add altsetting support, or other interfaces, * only 0/0 are possible. pxa2xx only supports 0/0 (poorly) * and already killed pending endpoint I/O. */ case USB_REQ_SET_INTERFACE: if (ctrl->bRequestType != USB_RECIP_INTERFACE) goto unknown; spin_lock (&dev->lock); if (dev->config && w_index == 0 && w_value == 0) { u8 config = dev->config; /* resets interface configuration, forgets about * previous transaction state (queued bufs, etc) * and re-inits endpoint state (toggle etc) * no response queued, just zero status == success. * if we had more than one interface we couldn't * use this "reset the config" shortcut. */ zero_reset_config (dev); zero_set_config (dev, config, GFP_ATOMIC); value = 0; } spin_unlock (&dev->lock); break; case USB_REQ_GET_INTERFACE: if (ctrl->bRequestType != (USB_DIR_IN|USB_RECIP_INTERFACE)) goto unknown; if (!dev->config) break; if (w_index != 0) { value = -EDOM; break; } *(u8 *)req->buf = 0; value = min (w_length, (u16) 1); break; /* * These are the same vendor-specific requests supported by * Intel's USB 2.0 compliance test devices. We exceed that * device spec by allowing multiple-packet requests. */ case 0x5b: /* control WRITE test -- fill the buffer */ if (ctrl->bRequestType != (USB_DIR_OUT|USB_TYPE_VENDOR)) goto unknown; if (w_value || w_index) break; /* just read that many bytes into the buffer */ if (w_length > USB_BUFSIZ) break; value = w_length; break; case 0x5c: /* control READ test -- return the buffer */ if (ctrl->bRequestType != (USB_DIR_IN|USB_TYPE_VENDOR)) goto unknown; if (w_value || w_index) break; /* expect those bytes are still in the buffer; send back */ if (w_length > USB_BUFSIZ || w_length != req->length) break; value = w_length; break; default: unknown: VDBG (dev, "unknown control req%02x.%02x v%04x i%04x l%d\n", ctrl->bRequestType, ctrl->bRequest, w_value, w_index, w_length); } /* respond with data transfer before status phase? */ if (value >= 0) { req->length = value; req->zero = value < w_length; value = usb_ep_queue (gadget->ep0, req, GFP_ATOMIC); if (value < 0) { DBG (dev, "ep_queue --> %d\n", value); req->status = 0; zero_setup_complete (gadget->ep0, req); } } /* device either stalls (value < 0) or reports success */ return value; } static void zero_disconnect (struct usb_gadget *gadget) { struct zero_dev *dev = get_gadget_data (gadget); unsigned long flags; spin_lock_irqsave (&dev->lock, flags); zero_reset_config (dev); /* a more significant application might have some non-usb * activities to quiesce here, saving resources like power * or pushing the notification up a network stack. */ spin_unlock_irqrestore (&dev->lock, flags); /* next we may get setup() calls to enumerate new connections; * or an unbind() during shutdown (including removing module). */ } static void zero_autoresume (unsigned long _dev) { struct zero_dev *dev = (struct zero_dev *) _dev; int status; /* normally the host would be woken up for something * more significant than just a timer firing... */ if (dev->gadget->speed != USB_SPEED_UNKNOWN) { status = usb_gadget_wakeup (dev->gadget); DBG (dev, "wakeup --> %d\n", status); } } /*-------------------------------------------------------------------------*/ static void /* __init_or_exit */ zero_unbind (struct usb_gadget *gadget) { struct zero_dev *dev = get_gadget_data (gadget); DBG (dev, "unbind\n"); /* we've already been disconnected ... no i/o is active */ if (dev->req) { dev->req->length = USB_BUFSIZ; free_ep_req (gadget->ep0, dev->req); } del_timer_sync (&dev->resume); kfree (dev); set_gadget_data (gadget, NULL); } static int __init zero_bind (struct usb_gadget *gadget) { struct zero_dev *dev; struct usb_ep *ep; int gcnum; /* FIXME this can't yet work right with SH ... it has only * one configuration, numbered one. */ if (gadget_is_sh(gadget)) return -ENODEV; /* Bulk-only drivers like this one SHOULD be able to * autoconfigure on any sane usb controller driver, * but there may also be important quirks to address. */ usb_ep_autoconfig_reset (gadget); ep = usb_ep_autoconfig (gadget, &fs_source_desc); if (!ep) { autoconf_fail: printk (KERN_ERR "%s: can't autoconfigure on %s\n", shortname, gadget->name); return -ENODEV; } EP_IN_NAME = ep->name; ep->driver_data = ep; /* claim */ ep = usb_ep_autoconfig (gadget, &fs_sink_desc); if (!ep) goto autoconf_fail; EP_OUT_NAME = ep->name; ep->driver_data = ep; /* claim */ gcnum = usb_gadget_controller_number (gadget); if (gcnum >= 0) device_desc.bcdDevice = cpu_to_le16 (0x0200 + gcnum); else { /* gadget zero is so simple (for now, no altsettings) that * it SHOULD NOT have problems with bulk-capable hardware. * so warn about unrcognized controllers, don't panic. * * things like configuration and altsetting numbering * can need hardware-specific attention though. */ printk (KERN_WARNING "%s: controller '%s' not recognized\n", shortname, gadget->name); device_desc.bcdDevice = __constant_cpu_to_le16 (0x9999); } /* ok, we made sense of the hardware ... */ dev = kzalloc(sizeof(*dev), GFP_KERNEL); if (!dev) return -ENOMEM; spin_lock_init (&dev->lock); dev->gadget = gadget; set_gadget_data (gadget, dev); /* preallocate control response and buffer */ dev->req = usb_ep_alloc_request (gadget->ep0, GFP_KERNEL); if (!dev->req) goto enomem; dev->req->buf = usb_ep_alloc_buffer (gadget->ep0, USB_BUFSIZ, &dev->req->dma, GFP_KERNEL); if (!dev->req->buf) goto enomem; dev->req->complete = zero_setup_complete; device_desc.bMaxPacketSize0 = gadget->ep0->maxpacket; #ifdef CONFIG_USB_GADGET_DUALSPEED /* assume ep0 uses the same value for both speeds ... */ dev_qualifier.bMaxPacketSize0 = device_desc.bMaxPacketSize0; /* and that all endpoints are dual-speed */ hs_source_desc.bEndpointAddress = fs_source_desc.bEndpointAddress; hs_sink_desc.bEndpointAddress = fs_sink_desc.bEndpointAddress; #endif if (gadget->is_otg) { otg_descriptor.bmAttributes |= USB_OTG_HNP, source_sink_config.bmAttributes |= USB_CONFIG_ATT_WAKEUP; loopback_config.bmAttributes |= USB_CONFIG_ATT_WAKEUP; } usb_gadget_set_selfpowered (gadget); init_timer (&dev->resume); dev->resume.function = zero_autoresume; dev->resume.data = (unsigned long) dev; if (autoresume) { source_sink_config.bmAttributes |= USB_CONFIG_ATT_WAKEUP; loopback_config.bmAttributes |= USB_CONFIG_ATT_WAKEUP; } gadget->ep0->driver_data = dev; INFO (dev, "%s, version: " DRIVER_VERSION "\n", longname); INFO (dev, "using %s, OUT %s IN %s\n", gadget->name, EP_OUT_NAME, EP_IN_NAME); snprintf (manufacturer, sizeof manufacturer, "%s %s with %s", init_utsname()->sysname, init_utsname()->release, gadget->name); return 0; enomem: zero_unbind (gadget); return -ENOMEM; } /*-------------------------------------------------------------------------*/ static void zero_suspend (struct usb_gadget *gadget) { struct zero_dev *dev = get_gadget_data (gadget); if (gadget->speed == USB_SPEED_UNKNOWN) return; if (autoresume) { mod_timer (&dev->resume, jiffies + (HZ * autoresume)); DBG (dev, "suspend, wakeup in %d seconds\n", autoresume); } else DBG (dev, "suspend\n"); } static void zero_resume (struct usb_gadget *gadget) { struct zero_dev *dev = get_gadget_data (gadget); DBG (dev, "resume\n"); del_timer (&dev->resume); } /*-------------------------------------------------------------------------*/ static struct usb_gadget_driver zero_driver = { #ifdef CONFIG_USB_GADGET_DUALSPEED .speed = USB_SPEED_HIGH, #else .speed = USB_SPEED_FULL, #endif .function = (char *) longname, .bind = zero_bind, .unbind = __exit_p(zero_unbind), .setup = zero_setup, .disconnect = zero_disconnect, .suspend = zero_suspend, .resume = zero_resume, .driver = { .name = (char *) shortname, .owner = THIS_MODULE, }, }; MODULE_AUTHOR ("David Brownell"); MODULE_LICENSE ("Dual BSD/GPL"); static int __init init (void) { /* a real value would likely come through some id prom * or module option. this one takes at least two packets. */ strlcpy (serial, "0123456789.0123456789.0123456789", sizeof serial); return usb_gadget_register_driver (&zero_driver); } module_init (init); static void __exit cleanup (void) { usb_gadget_unregister_driver (&zero_driver); } module_exit (cleanup);