/* * g_serial.c -- USB gadget serial driver * * Copyright 2003 (C) Al Borchers (alborchers@steinerpoint.com) * * This code is based in part on the Gadget Zero driver, which * is Copyright (C) 2003 by David Brownell, all rights reserved. * * This code also borrows from usbserial.c, which is * Copyright (C) 1999 - 2002 Greg Kroah-Hartman (greg@kroah.com) * Copyright (C) 2000 Peter Berger (pberger@brimson.com) * Copyright (C) 2000 Al Borchers (alborchers@steinerpoint.com) * * This software is distributed under the terms of the GNU General * Public License ("GPL") as published by the Free Software Foundation, * either version 2 of that License or (at your option) any later version. * */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "gadget_chips.h" /* Defines */ #define GS_VERSION_STR "v2.2" #define GS_VERSION_NUM 0x0202 #define GS_LONG_NAME "Gadget Serial" #define GS_SHORT_NAME "g_serial" #define GS_MAJOR 127 #define GS_MINOR_START 0 #define GS_NUM_PORTS 16 #define GS_NUM_CONFIGS 1 #define GS_NO_CONFIG_ID 0 #define GS_BULK_CONFIG_ID 1 #define GS_ACM_CONFIG_ID 2 #define GS_MAX_NUM_INTERFACES 2 #define GS_BULK_INTERFACE_ID 0 #define GS_CONTROL_INTERFACE_ID 0 #define GS_DATA_INTERFACE_ID 1 #define GS_MAX_DESC_LEN 256 #define GS_DEFAULT_READ_Q_SIZE 32 #define GS_DEFAULT_WRITE_Q_SIZE 32 #define GS_DEFAULT_WRITE_BUF_SIZE 8192 #define GS_TMP_BUF_SIZE 8192 #define GS_CLOSE_TIMEOUT 15 #define GS_DEFAULT_USE_ACM 0 #define GS_DEFAULT_DTE_RATE 9600 #define GS_DEFAULT_DATA_BITS 8 #define GS_DEFAULT_PARITY USB_CDC_NO_PARITY #define GS_DEFAULT_CHAR_FORMAT USB_CDC_1_STOP_BITS /* select highspeed/fullspeed, hiding highspeed if not configured */ #ifdef CONFIG_USB_GADGET_DUALSPEED #define GS_SPEED_SELECT(is_hs,hs,fs) ((is_hs) ? (hs) : (fs)) #else #define GS_SPEED_SELECT(is_hs,hs,fs) (fs) #endif /* CONFIG_USB_GADGET_DUALSPEED */ /* debug settings */ #ifdef GS_DEBUG static int debug = 1; #define gs_debug(format, arg...) \ do { if (debug) printk(KERN_DEBUG format, ## arg); } while(0) #define gs_debug_level(level, format, arg...) \ do { if (debug>=level) printk(KERN_DEBUG format, ## arg); } while(0) #else #define gs_debug(format, arg...) \ do { } while(0) #define gs_debug_level(level, format, arg...) \ do { } while(0) #endif /* GS_DEBUG */ /* Thanks to NetChip Technologies for donating this product ID. * * DO NOT REUSE THESE IDs with a protocol-incompatible driver!! Ever!! * Instead: allocate your own, using normal USB-IF procedures. */ #define GS_VENDOR_ID 0x0525 /* NetChip */ #define GS_PRODUCT_ID 0xa4a6 /* Linux-USB Serial Gadget */ #define GS_CDC_PRODUCT_ID 0xa4a7 /* ... as CDC-ACM */ #define GS_LOG2_NOTIFY_INTERVAL 5 /* 1 << 5 == 32 msec */ #define GS_NOTIFY_MAXPACKET 8 /* Structures */ struct gs_dev; /* circular buffer */ struct gs_buf { unsigned int buf_size; char *buf_buf; char *buf_get; char *buf_put; }; /* list of requests */ struct gs_req_entry { struct list_head re_entry; struct usb_request *re_req; }; /* the port structure holds info for each port, one for each minor number */ struct gs_port { struct gs_dev *port_dev; /* pointer to device struct */ struct tty_struct *port_tty; /* pointer to tty struct */ spinlock_t port_lock; int port_num; int port_open_count; int port_in_use; /* open/close in progress */ wait_queue_head_t port_write_wait;/* waiting to write */ struct gs_buf *port_write_buf; struct usb_cdc_line_coding port_line_coding; }; /* the device structure holds info for the USB device */ struct gs_dev { struct usb_gadget *dev_gadget; /* gadget device pointer */ spinlock_t dev_lock; /* lock for set/reset config */ int dev_config; /* configuration number */ struct usb_ep *dev_notify_ep; /* address of notify endpoint */ struct usb_ep *dev_in_ep; /* address of in endpoint */ struct usb_ep *dev_out_ep; /* address of out endpoint */ struct usb_endpoint_descriptor /* descriptor of notify ep */ *dev_notify_ep_desc; struct usb_endpoint_descriptor /* descriptor of in endpoint */ *dev_in_ep_desc; struct usb_endpoint_descriptor /* descriptor of out endpoint */ *dev_out_ep_desc; struct usb_request *dev_ctrl_req; /* control request */ struct list_head dev_req_list; /* list of write requests */ int dev_sched_port; /* round robin port scheduled */ struct gs_port *dev_port[GS_NUM_PORTS]; /* the ports */ }; /* Functions */ /* module */ static int __init gs_module_init(void); static void __exit gs_module_exit(void); /* tty driver */ static int gs_open(struct tty_struct *tty, struct file *file); static void gs_close(struct tty_struct *tty, struct file *file); static int gs_write(struct tty_struct *tty, const unsigned char *buf, int count); static void gs_put_char(struct tty_struct *tty, unsigned char ch); static void gs_flush_chars(struct tty_struct *tty); static int gs_write_room(struct tty_struct *tty); static int gs_chars_in_buffer(struct tty_struct *tty); static void gs_throttle(struct tty_struct * tty); static void gs_unthrottle(struct tty_struct * tty); static void gs_break(struct tty_struct *tty, int break_state); static int gs_ioctl(struct tty_struct *tty, struct file *file, unsigned int cmd, unsigned long arg); static void gs_set_termios(struct tty_struct *tty, struct ktermios *old); static int gs_send(struct gs_dev *dev); static int gs_send_packet(struct gs_dev *dev, char *packet, unsigned int size); static int gs_recv_packet(struct gs_dev *dev, char *packet, unsigned int size); static void gs_read_complete(struct usb_ep *ep, struct usb_request *req); static void gs_write_complete(struct usb_ep *ep, struct usb_request *req); /* gadget driver */ static int gs_bind(struct usb_gadget *gadget); static void gs_unbind(struct usb_gadget *gadget); static int gs_setup(struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl); static int gs_setup_standard(struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl); static int gs_setup_class(struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl); static void gs_setup_complete(struct usb_ep *ep, struct usb_request *req); static void gs_disconnect(struct usb_gadget *gadget); static int gs_set_config(struct gs_dev *dev, unsigned config); static void gs_reset_config(struct gs_dev *dev); static int gs_build_config_buf(u8 *buf, enum usb_device_speed speed, u8 type, unsigned int index, int is_otg); static struct usb_request *gs_alloc_req(struct usb_ep *ep, unsigned int len, gfp_t kmalloc_flags); static void gs_free_req(struct usb_ep *ep, struct usb_request *req); static struct gs_req_entry *gs_alloc_req_entry(struct usb_ep *ep, unsigned len, gfp_t kmalloc_flags); static void gs_free_req_entry(struct usb_ep *ep, struct gs_req_entry *req); static int gs_alloc_ports(struct gs_dev *dev, gfp_t kmalloc_flags); static void gs_free_ports(struct gs_dev *dev); /* circular buffer */ static struct gs_buf *gs_buf_alloc(unsigned int size, gfp_t kmalloc_flags); static void gs_buf_free(struct gs_buf *gb); static void gs_buf_clear(struct gs_buf *gb); static unsigned int gs_buf_data_avail(struct gs_buf *gb); static unsigned int gs_buf_space_avail(struct gs_buf *gb); static unsigned int gs_buf_put(struct gs_buf *gb, const char *buf, unsigned int count); static unsigned int gs_buf_get(struct gs_buf *gb, char *buf, unsigned int count); /* external functions */ extern int net2280_set_fifo_mode(struct usb_gadget *gadget, int mode); /* Globals */ static struct gs_dev *gs_device; static const char *EP_IN_NAME; static const char *EP_OUT_NAME; static const char *EP_NOTIFY_NAME; static struct semaphore gs_open_close_sem[GS_NUM_PORTS]; static unsigned int read_q_size = GS_DEFAULT_READ_Q_SIZE; static unsigned int write_q_size = GS_DEFAULT_WRITE_Q_SIZE; static unsigned int write_buf_size = GS_DEFAULT_WRITE_BUF_SIZE; static unsigned int use_acm = GS_DEFAULT_USE_ACM; /* tty driver struct */ static const struct tty_operations gs_tty_ops = { .open = gs_open, .close = gs_close, .write = gs_write, .put_char = gs_put_char, .flush_chars = gs_flush_chars, .write_room = gs_write_room, .ioctl = gs_ioctl, .set_termios = gs_set_termios, .throttle = gs_throttle, .unthrottle = gs_unthrottle, .break_ctl = gs_break, .chars_in_buffer = gs_chars_in_buffer, }; static struct tty_driver *gs_tty_driver; /* gadget driver struct */ static struct usb_gadget_driver gs_gadget_driver = { #ifdef CONFIG_USB_GADGET_DUALSPEED .speed = USB_SPEED_HIGH, #else .speed = USB_SPEED_FULL, #endif /* CONFIG_USB_GADGET_DUALSPEED */ .function = GS_LONG_NAME, .bind = gs_bind, .unbind = gs_unbind, .setup = gs_setup, .disconnect = gs_disconnect, .driver = { .name = GS_SHORT_NAME, }, }; /* USB descriptors */ #define GS_MANUFACTURER_STR_ID 1 #define GS_PRODUCT_STR_ID 2 #define GS_SERIAL_STR_ID 3 #define GS_BULK_CONFIG_STR_ID 4 #define GS_ACM_CONFIG_STR_ID 5 #define GS_CONTROL_STR_ID 6 #define GS_DATA_STR_ID 7 /* static strings, in UTF-8 */ static char manufacturer[50]; static struct usb_string gs_strings[] = { { GS_MANUFACTURER_STR_ID, manufacturer }, { GS_PRODUCT_STR_ID, GS_LONG_NAME }, { GS_SERIAL_STR_ID, "0" }, { GS_BULK_CONFIG_STR_ID, "Gadget Serial Bulk" }, { GS_ACM_CONFIG_STR_ID, "Gadget Serial CDC ACM" }, { GS_CONTROL_STR_ID, "Gadget Serial Control" }, { GS_DATA_STR_ID, "Gadget Serial Data" }, { } /* end of list */ }; static struct usb_gadget_strings gs_string_table = { .language = 0x0409, /* en-us */ .strings = gs_strings, }; static struct usb_device_descriptor gs_device_desc = { .bLength = USB_DT_DEVICE_SIZE, .bDescriptorType = USB_DT_DEVICE, .bcdUSB = __constant_cpu_to_le16(0x0200), .bDeviceSubClass = 0, .bDeviceProtocol = 0, .idVendor = __constant_cpu_to_le16(GS_VENDOR_ID), .idProduct = __constant_cpu_to_le16(GS_PRODUCT_ID), .iManufacturer = GS_MANUFACTURER_STR_ID, .iProduct = GS_PRODUCT_STR_ID, .iSerialNumber = GS_SERIAL_STR_ID, .bNumConfigurations = GS_NUM_CONFIGS, }; static struct usb_otg_descriptor gs_otg_descriptor = { .bLength = sizeof(gs_otg_descriptor), .bDescriptorType = USB_DT_OTG, .bmAttributes = USB_OTG_SRP, }; static struct usb_config_descriptor gs_bulk_config_desc = { .bLength = USB_DT_CONFIG_SIZE, .bDescriptorType = USB_DT_CONFIG, /* .wTotalLength computed dynamically */ .bNumInterfaces = 1, .bConfigurationValue = GS_BULK_CONFIG_ID, .iConfiguration = GS_BULK_CONFIG_STR_ID, .bmAttributes = USB_CONFIG_ATT_ONE | USB_CONFIG_ATT_SELFPOWER, .bMaxPower = 1, }; static struct usb_config_descriptor gs_acm_config_desc = { .bLength = USB_DT_CONFIG_SIZE, .bDescriptorType = USB_DT_CONFIG, /* .wTotalLength computed dynamically */ .bNumInterfaces = 2, .bConfigurationValue = GS_ACM_CONFIG_ID, .iConfiguration = GS_ACM_CONFIG_STR_ID, .bmAttributes = USB_CONFIG_ATT_ONE | USB_CONFIG_ATT_SELFPOWER, .bMaxPower = 1, }; static const struct usb_interface_descriptor gs_bulk_interface_desc = { .bLength = USB_DT_INTERFACE_SIZE, .bDescriptorType = USB_DT_INTERFACE, .bInterfaceNumber = GS_BULK_INTERFACE_ID, .bNumEndpoints = 2, .bInterfaceClass = USB_CLASS_CDC_DATA, .bInterfaceSubClass = 0, .bInterfaceProtocol = 0, .iInterface = GS_DATA_STR_ID, }; static const struct usb_interface_descriptor gs_control_interface_desc = { .bLength = USB_DT_INTERFACE_SIZE, .bDescriptorType = USB_DT_INTERFACE, .bInterfaceNumber = GS_CONTROL_INTERFACE_ID, .bNumEndpoints = 1, .bInterfaceClass = USB_CLASS_COMM, .bInterfaceSubClass = USB_CDC_SUBCLASS_ACM, .bInterfaceProtocol = USB_CDC_ACM_PROTO_AT_V25TER, .iInterface = GS_CONTROL_STR_ID, }; static const struct usb_interface_descriptor gs_data_interface_desc = { .bLength = USB_DT_INTERFACE_SIZE, .bDescriptorType = USB_DT_INTERFACE, .bInterfaceNumber = GS_DATA_INTERFACE_ID, .bNumEndpoints = 2, .bInterfaceClass = USB_CLASS_CDC_DATA, .bInterfaceSubClass = 0, .bInterfaceProtocol = 0, .iInterface = GS_DATA_STR_ID, }; static const struct usb_cdc_header_desc gs_header_desc = { .bLength = sizeof(gs_header_desc), .bDescriptorType = USB_DT_CS_INTERFACE, .bDescriptorSubType = USB_CDC_HEADER_TYPE, .bcdCDC = __constant_cpu_to_le16(0x0110), }; static const struct usb_cdc_call_mgmt_descriptor gs_call_mgmt_descriptor = { .bLength = sizeof(gs_call_mgmt_descriptor), .bDescriptorType = USB_DT_CS_INTERFACE, .bDescriptorSubType = USB_CDC_CALL_MANAGEMENT_TYPE, .bmCapabilities = 0, .bDataInterface = 1, /* index of data interface */ }; static struct usb_cdc_acm_descriptor gs_acm_descriptor = { .bLength = sizeof(gs_acm_descriptor), .bDescriptorType = USB_DT_CS_INTERFACE, .bDescriptorSubType = USB_CDC_ACM_TYPE, .bmCapabilities = 0, }; static const struct usb_cdc_union_desc gs_union_desc = { .bLength = sizeof(gs_union_desc), .bDescriptorType = USB_DT_CS_INTERFACE, .bDescriptorSubType = USB_CDC_UNION_TYPE, .bMasterInterface0 = 0, /* index of control interface */ .bSlaveInterface0 = 1, /* index of data interface */ }; static struct usb_endpoint_descriptor gs_fullspeed_notify_desc = { .bLength = USB_DT_ENDPOINT_SIZE, .bDescriptorType = USB_DT_ENDPOINT, .bEndpointAddress = USB_DIR_IN, .bmAttributes = USB_ENDPOINT_XFER_INT, .wMaxPacketSize = __constant_cpu_to_le16(GS_NOTIFY_MAXPACKET), .bInterval = 1 << GS_LOG2_NOTIFY_INTERVAL, }; static struct usb_endpoint_descriptor gs_fullspeed_in_desc = { .bLength = USB_DT_ENDPOINT_SIZE, .bDescriptorType = USB_DT_ENDPOINT, .bEndpointAddress = USB_DIR_IN, .bmAttributes = USB_ENDPOINT_XFER_BULK, }; static struct usb_endpoint_descriptor gs_fullspeed_out_desc = { .bLength = USB_DT_ENDPOINT_SIZE, .bDescriptorType = USB_DT_ENDPOINT, .bEndpointAddress = USB_DIR_OUT, .bmAttributes = USB_ENDPOINT_XFER_BULK, }; static const struct usb_descriptor_header *gs_bulk_fullspeed_function[] = { (struct usb_descriptor_header *) &gs_otg_descriptor, (struct usb_descriptor_header *) &gs_bulk_interface_desc, (struct usb_descriptor_header *) &gs_fullspeed_in_desc, (struct usb_descriptor_header *) &gs_fullspeed_out_desc, NULL, }; static const struct usb_descriptor_header *gs_acm_fullspeed_function[] = { (struct usb_descriptor_header *) &gs_otg_descriptor, (struct usb_descriptor_header *) &gs_control_interface_desc, (struct usb_descriptor_header *) &gs_header_desc, (struct usb_descriptor_header *) &gs_call_mgmt_descriptor, (struct usb_descriptor_header *) &gs_acm_descriptor, (struct usb_descriptor_header *) &gs_union_desc, (struct usb_descriptor_header *) &gs_fullspeed_notify_desc, (struct usb_descriptor_header *) &gs_data_interface_desc, (struct usb_descriptor_header *) &gs_fullspeed_in_desc, (struct usb_descriptor_header *) &gs_fullspeed_out_desc, NULL, }; #ifdef CONFIG_USB_GADGET_DUALSPEED static struct usb_endpoint_descriptor gs_highspeed_notify_desc = { .bLength = USB_DT_ENDPOINT_SIZE, .bDescriptorType = USB_DT_ENDPOINT, .bEndpointAddress = USB_DIR_IN, .bmAttributes = USB_ENDPOINT_XFER_INT, .wMaxPacketSize = __constant_cpu_to_le16(GS_NOTIFY_MAXPACKET), .bInterval = GS_LOG2_NOTIFY_INTERVAL+4, }; static struct usb_endpoint_descriptor gs_highspeed_in_desc = { .bLength = USB_DT_ENDPOINT_SIZE, .bDescriptorType = USB_DT_ENDPOINT, .bmAttributes = USB_ENDPOINT_XFER_BULK, .wMaxPacketSize = __constant_cpu_to_le16(512), }; static struct usb_endpoint_descriptor gs_highspeed_out_desc = { .bLength = USB_DT_ENDPOINT_SIZE, .bDescriptorType = USB_DT_ENDPOINT, .bmAttributes = USB_ENDPOINT_XFER_BULK, .wMaxPacketSize = __constant_cpu_to_le16(512), }; static struct usb_qualifier_descriptor gs_qualifier_desc = { .bLength = sizeof(struct usb_qualifier_descriptor), .bDescriptorType = USB_DT_DEVICE_QUALIFIER, .bcdUSB = __constant_cpu_to_le16 (0x0200), /* assumes ep0 uses the same value for both speeds ... */ .bNumConfigurations = GS_NUM_CONFIGS, }; static const struct usb_descriptor_header *gs_bulk_highspeed_function[] = { (struct usb_descriptor_header *) &gs_otg_descriptor, (struct usb_descriptor_header *) &gs_bulk_interface_desc, (struct usb_descriptor_header *) &gs_highspeed_in_desc, (struct usb_descriptor_header *) &gs_highspeed_out_desc, NULL, }; static const struct usb_descriptor_header *gs_acm_highspeed_function[] = { (struct usb_descriptor_header *) &gs_otg_descriptor, (struct usb_descriptor_header *) &gs_control_interface_desc, (struct usb_descriptor_header *) &gs_header_desc, (struct usb_descriptor_header *) &gs_call_mgmt_descriptor, (struct usb_descriptor_header *) &gs_acm_descriptor, (struct usb_descriptor_header *) &gs_union_desc, (struct usb_descriptor_header *) &gs_highspeed_notify_desc, (struct usb_descriptor_header *) &gs_data_interface_desc, (struct usb_descriptor_header *) &gs_highspeed_in_desc, (struct usb_descriptor_header *) &gs_highspeed_out_desc, NULL, }; #endif /* CONFIG_USB_GADGET_DUALSPEED */ /* Module */ MODULE_DESCRIPTION(GS_LONG_NAME); MODULE_AUTHOR("Al Borchers"); MODULE_LICENSE("GPL"); #ifdef GS_DEBUG module_param(debug, int, S_IRUGO|S_IWUSR); MODULE_PARM_DESC(debug, "Enable debugging, 0=off, 1=on"); #endif module_param(read_q_size, uint, S_IRUGO); MODULE_PARM_DESC(read_q_size, "Read request queue size, default=32"); module_param(write_q_size, uint, S_IRUGO); MODULE_PARM_DESC(write_q_size, "Write request queue size, default=32"); module_param(write_buf_size, uint, S_IRUGO); MODULE_PARM_DESC(write_buf_size, "Write buffer size, default=8192"); module_param(use_acm, uint, S_IRUGO); MODULE_PARM_DESC(use_acm, "Use CDC ACM, 0=no, 1=yes, default=no"); module_init(gs_module_init); module_exit(gs_module_exit); /* * gs_module_init * * Register as a USB gadget driver and a tty driver. */ static int __init gs_module_init(void) { int i; int retval; retval = usb_gadget_register_driver(&gs_gadget_driver); if (retval) { printk(KERN_ERR "gs_module_init: cannot register gadget driver, ret=%d\n", retval); return retval; } gs_tty_driver = alloc_tty_driver(GS_NUM_PORTS); if (!gs_tty_driver) return -ENOMEM; gs_tty_driver->owner = THIS_MODULE; gs_tty_driver->driver_name = GS_SHORT_NAME; gs_tty_driver->name = "ttygs"; gs_tty_driver->major = GS_MAJOR; gs_tty_driver->minor_start = GS_MINOR_START; gs_tty_driver->type = TTY_DRIVER_TYPE_SERIAL; gs_tty_driver->subtype = SERIAL_TYPE_NORMAL; gs_tty_driver->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV; gs_tty_driver->init_termios = tty_std_termios; gs_tty_driver->init_termios.c_cflag = B9600 | CS8 | CREAD | HUPCL | CLOCAL; tty_set_operations(gs_tty_driver, &gs_tty_ops); for (i=0; i < GS_NUM_PORTS; i++) sema_init(&gs_open_close_sem[i], 1); retval = tty_register_driver(gs_tty_driver); if (retval) { usb_gadget_unregister_driver(&gs_gadget_driver); put_tty_driver(gs_tty_driver); printk(KERN_ERR "gs_module_init: cannot register tty driver, ret=%d\n", retval); return retval; } printk(KERN_INFO "gs_module_init: %s %s loaded\n", GS_LONG_NAME, GS_VERSION_STR); return 0; } /* * gs_module_exit * * Unregister as a tty driver and a USB gadget driver. */ static void __exit gs_module_exit(void) { tty_unregister_driver(gs_tty_driver); put_tty_driver(gs_tty_driver); usb_gadget_unregister_driver(&gs_gadget_driver); printk(KERN_INFO "gs_module_exit: %s %s unloaded\n", GS_LONG_NAME, GS_VERSION_STR); } /* TTY Driver */ /* * gs_open */ static int gs_open(struct tty_struct *tty, struct file *file) { int port_num; unsigned long flags; struct gs_port *port; struct gs_dev *dev; struct gs_buf *buf; struct semaphore *sem; int ret; port_num = tty->index; gs_debug("gs_open: (%d,%p,%p)\n", port_num, tty, file); if (port_num < 0 || port_num >= GS_NUM_PORTS) { printk(KERN_ERR "gs_open: (%d,%p,%p) invalid port number\n", port_num, tty, file); return -ENODEV; } dev = gs_device; if (dev == NULL) { printk(KERN_ERR "gs_open: (%d,%p,%p) NULL device pointer\n", port_num, tty, file); return -ENODEV; } sem = &gs_open_close_sem[port_num]; if (down_interruptible(sem)) { printk(KERN_ERR "gs_open: (%d,%p,%p) interrupted waiting for semaphore\n", port_num, tty, file); return -ERESTARTSYS; } spin_lock_irqsave(&dev->dev_lock, flags); if (dev->dev_config == GS_NO_CONFIG_ID) { printk(KERN_ERR "gs_open: (%d,%p,%p) device is not connected\n", port_num, tty, file); ret = -ENODEV; goto exit_unlock_dev; } port = dev->dev_port[port_num]; if (port == NULL) { printk(KERN_ERR "gs_open: (%d,%p,%p) NULL port pointer\n", port_num, tty, file); ret = -ENODEV; goto exit_unlock_dev; } spin_lock(&port->port_lock); spin_unlock(&dev->dev_lock); if (port->port_dev == NULL) { printk(KERN_ERR "gs_open: (%d,%p,%p) port disconnected (1)\n", port_num, tty, file); ret = -EIO; goto exit_unlock_port; } if (port->port_open_count > 0) { ++port->port_open_count; gs_debug("gs_open: (%d,%p,%p) already open\n", port_num, tty, file); ret = 0; goto exit_unlock_port; } tty->driver_data = NULL; /* mark port as in use, we can drop port lock and sleep if necessary */ port->port_in_use = 1; /* allocate write buffer on first open */ if (port->port_write_buf == NULL) { spin_unlock_irqrestore(&port->port_lock, flags); buf = gs_buf_alloc(write_buf_size, GFP_KERNEL); spin_lock_irqsave(&port->port_lock, flags); /* might have been disconnected while asleep, check */ if (port->port_dev == NULL) { printk(KERN_ERR "gs_open: (%d,%p,%p) port disconnected (2)\n", port_num, tty, file); port->port_in_use = 0; ret = -EIO; goto exit_unlock_port; } if ((port->port_write_buf=buf) == NULL) { printk(KERN_ERR "gs_open: (%d,%p,%p) cannot allocate port write buffer\n", port_num, tty, file); port->port_in_use = 0; ret = -ENOMEM; goto exit_unlock_port; } } /* wait for carrier detect (not implemented) */ /* might have been disconnected while asleep, check */ if (port->port_dev == NULL) { printk(KERN_ERR "gs_open: (%d,%p,%p) port disconnected (3)\n", port_num, tty, file); port->port_in_use = 0; ret = -EIO; goto exit_unlock_port; } tty->driver_data = port; port->port_tty = tty; port->port_open_count = 1; port->port_in_use = 0; gs_debug("gs_open: (%d,%p,%p) completed\n", port_num, tty, file); ret = 0; exit_unlock_port: spin_unlock_irqrestore(&port->port_lock, flags); up(sem); return ret; exit_unlock_dev: spin_unlock_irqrestore(&dev->dev_lock, flags); up(sem); return ret; } /* * gs_close */ #define GS_WRITE_FINISHED_EVENT_SAFELY(p) \ ({ \ int cond; \ \ spin_lock_irq(&(p)->port_lock); \ cond = !(p)->port_dev || !gs_buf_data_avail((p)->port_write_buf); \ spin_unlock_irq(&(p)->port_lock); \ cond; \ }) static void gs_close(struct tty_struct *tty, struct file *file) { struct gs_port *port = tty->driver_data; struct semaphore *sem; if (port == NULL) { printk(KERN_ERR "gs_close: NULL port pointer\n"); return; } gs_debug("gs_close: (%d,%p,%p)\n", port->port_num, tty, file); sem = &gs_open_close_sem[port->port_num]; down(sem); spin_lock_irq(&port->port_lock); if (port->port_open_count == 0) { printk(KERN_ERR "gs_close: (%d,%p,%p) port is already closed\n", port->port_num, tty, file); goto exit; } if (port->port_open_count > 1) { --port->port_open_count; goto exit; } /* free disconnected port on final close */ if (port->port_dev == NULL) { kfree(port); goto exit; } /* mark port as closed but in use, we can drop port lock */ /* and sleep if necessary */ port->port_in_use = 1; port->port_open_count = 0; /* wait for write buffer to drain, or */ /* at most GS_CLOSE_TIMEOUT seconds */ if (gs_buf_data_avail(port->port_write_buf) > 0) { spin_unlock_irq(&port->port_lock); wait_event_interruptible_timeout(port->port_write_wait, GS_WRITE_FINISHED_EVENT_SAFELY(port), GS_CLOSE_TIMEOUT * HZ); spin_lock_irq(&port->port_lock); } /* free disconnected port on final close */ /* (might have happened during the above sleep) */ if (port->port_dev == NULL) { kfree(port); goto exit; } gs_buf_clear(port->port_write_buf); tty->driver_data = NULL; port->port_tty = NULL; port->port_in_use = 0; gs_debug("gs_close: (%d,%p,%p) completed\n", port->port_num, tty, file); exit: spin_unlock_irq(&port->port_lock); up(sem); } /* * gs_write */ static int gs_write(struct tty_struct *tty, const unsigned char *buf, int count) { unsigned long flags; struct gs_port *port = tty->driver_data; int ret; if (port == NULL) { printk(KERN_ERR "gs_write: NULL port pointer\n"); return -EIO; } gs_debug("gs_write: (%d,%p) writing %d bytes\n", port->port_num, tty, count); if (count == 0) return 0; spin_lock_irqsave(&port->port_lock, flags); if (port->port_dev == NULL) { printk(KERN_ERR "gs_write: (%d,%p) port is not connected\n", port->port_num, tty); ret = -EIO; goto exit; } if (port->port_open_count == 0) { printk(KERN_ERR "gs_write: (%d,%p) port is closed\n", port->port_num, tty); ret = -EBADF; goto exit; } count = gs_buf_put(port->port_write_buf, buf, count); spin_unlock_irqrestore(&port->port_lock, flags); gs_send(gs_device); gs_debug("gs_write: (%d,%p) wrote %d bytes\n", port->port_num, tty, count); return count; exit: spin_unlock_irqrestore(&port->port_lock, flags); return ret; } /* * gs_put_char */ static void gs_put_char(struct tty_struct *tty, unsigned char ch) { unsigned long flags; struct gs_port *port = tty->driver_data; if (port == NULL) { printk(KERN_ERR "gs_put_char: NULL port pointer\n"); return; } gs_debug("gs_put_char: (%d,%p) char=0x%x, called from %p, %p, %p\n", port->port_num, tty, ch, __builtin_return_address(0), __builtin_return_address(1), __builtin_return_address(2)); spin_lock_irqsave(&port->port_lock, flags); if (port->port_dev == NULL) { printk(KERN_ERR "gs_put_char: (%d,%p) port is not connected\n", port->port_num, tty); goto exit; } if (port->port_open_count == 0) { printk(KERN_ERR "gs_put_char: (%d,%p) port is closed\n", port->port_num, tty); goto exit; } gs_buf_put(port->port_write_buf, &ch, 1); exit: spin_unlock_irqrestore(&port->port_lock, flags); } /* * gs_flush_chars */ static void gs_flush_chars(struct tty_struct *tty) { unsigned long flags; struct gs_port *port = tty->driver_data; if (port == NULL) { printk(KERN_ERR "gs_flush_chars: NULL port pointer\n"); return; } gs_debug("gs_flush_chars: (%d,%p)\n", port->port_num, tty); spin_lock_irqsave(&port->port_lock, flags); if (port->port_dev == NULL) { printk(KERN_ERR "gs_flush_chars: (%d,%p) port is not connected\n", port->port_num, tty); goto exit; } if (port->port_open_count == 0) { printk(KERN_ERR "gs_flush_chars: (%d,%p) port is closed\n", port->port_num, tty); goto exit; } spin_unlock_irqrestore(&port->port_lock, flags); gs_send(gs_device); return; exit: spin_unlock_irqrestore(&port->port_lock, flags); } /* * gs_write_room */ static int gs_write_room(struct tty_struct *tty) { int room = 0; unsigned long flags; struct gs_port *port = tty->driver_data; if (port == NULL) return 0; spin_lock_irqsave(&port->port_lock, flags); if (port->port_dev != NULL && port->port_open_count > 0 && port->port_write_buf != NULL) room = gs_buf_space_avail(port->port_write_buf); spin_unlock_irqrestore(&port->port_lock, flags); gs_debug("gs_write_room: (%d,%p) room=%d\n", port->port_num, tty, room); return room; } /* * gs_chars_in_buffer */ static int gs_chars_in_buffer(struct tty_struct *tty) { int chars = 0; unsigned long flags; struct gs_port *port = tty->driver_data; if (port == NULL) return 0; spin_lock_irqsave(&port->port_lock, flags); if (port->port_dev != NULL && port->port_open_count > 0 && port->port_write_buf != NULL) chars = gs_buf_data_avail(port->port_write_buf); spin_unlock_irqrestore(&port->port_lock, flags); gs_debug("gs_chars_in_buffer: (%d,%p) chars=%d\n", port->port_num, tty, chars); return chars; } /* * gs_throttle */ static void gs_throttle(struct tty_struct *tty) { } /* * gs_unthrottle */ static void gs_unthrottle(struct tty_struct *tty) { } /* * gs_break */ static void gs_break(struct tty_struct *tty, int break_state) { } /* * gs_ioctl */ static int gs_ioctl(struct tty_struct *tty, struct file *file, unsigned int cmd, unsigned long arg) { struct gs_port *port = tty->driver_data; if (port == NULL) { printk(KERN_ERR "gs_ioctl: NULL port pointer\n"); return -EIO; } gs_debug("gs_ioctl: (%d,%p,%p) cmd=0x%4.4x, arg=%lu\n", port->port_num, tty, file, cmd, arg); /* handle ioctls */ /* could not handle ioctl */ return -ENOIOCTLCMD; } /* * gs_set_termios */ static void gs_set_termios(struct tty_struct *tty, struct ktermios *old) { } /* * gs_send * * This function finds available write requests, calls * gs_send_packet to fill these packets with data, and * continues until either there are no more write requests * available or no more data to send. This function is * run whenever data arrives or write requests are available. */ static int gs_send(struct gs_dev *dev) { int ret,len; unsigned long flags; struct usb_ep *ep; struct usb_request *req; struct gs_req_entry *req_entry; if (dev == NULL) { printk(KERN_ERR "gs_send: NULL device pointer\n"); return -ENODEV; } spin_lock_irqsave(&dev->dev_lock, flags); ep = dev->dev_in_ep; while(!list_empty(&dev->dev_req_list)) { req_entry = list_entry(dev->dev_req_list.next, struct gs_req_entry, re_entry); req = req_entry->re_req; len = gs_send_packet(dev, req->buf, ep->maxpacket); if (len > 0) { gs_debug_level(3, "gs_send: len=%d, 0x%2.2x 0x%2.2x 0x%2.2x ...\n", len, *((unsigned char *)req->buf), *((unsigned char *)req->buf+1), *((unsigned char *)req->buf+2)); list_del(&req_entry->re_entry); req->length = len; spin_unlock_irqrestore(&dev->dev_lock, flags); if ((ret=usb_ep_queue(ep, req, GFP_ATOMIC))) { printk(KERN_ERR "gs_send: cannot queue read request, ret=%d\n", ret); spin_lock_irqsave(&dev->dev_lock, flags); break; } spin_lock_irqsave(&dev->dev_lock, flags); } else { break; } } spin_unlock_irqrestore(&dev->dev_lock, flags); return 0; } /* * gs_send_packet * * If there is data to send, a packet is built in the given * buffer and the size is returned. If there is no data to * send, 0 is returned. If there is any error a negative * error number is returned. * * Called during USB completion routine, on interrupt time. * * We assume that disconnect will not happen until all completion * routines have completed, so we can assume that the dev_port * array does not change during the lifetime of this function. */ static int gs_send_packet(struct gs_dev *dev, char *packet, unsigned int size) { unsigned int len; struct gs_port *port; /* TEMPORARY -- only port 0 is supported right now */ port = dev->dev_port[0]; if (port == NULL) { printk(KERN_ERR "gs_send_packet: port=%d, NULL port pointer\n", 0); return -EIO; } spin_lock(&port->port_lock); len = gs_buf_data_avail(port->port_write_buf); if (len < size) size = len; if (size == 0) goto exit; size = gs_buf_get(port->port_write_buf, packet, size); if (port->port_tty) wake_up_interruptible(&port->port_tty->write_wait); exit: spin_unlock(&port->port_lock); return size; } /* * gs_recv_packet * * Called for each USB packet received. Reads the packet * header and stuffs the data in the appropriate tty buffer. * Returns 0 if successful, or a negative error number. * * Called during USB completion routine, on interrupt time. * * We assume that disconnect will not happen until all completion * routines have completed, so we can assume that the dev_port * array does not change during the lifetime of this function. */ static int gs_recv_packet(struct gs_dev *dev, char *packet, unsigned int size) { unsigned int len; struct gs_port *port; int ret; struct tty_struct *tty; /* TEMPORARY -- only port 0 is supported right now */ port = dev->dev_port[0]; if (port == NULL) { printk(KERN_ERR "gs_recv_packet: port=%d, NULL port pointer\n", port->port_num); return -EIO; } spin_lock(&port->port_lock); if (port->port_open_count == 0) { printk(KERN_ERR "gs_recv_packet: port=%d, port is closed\n", port->port_num); ret = -EIO; goto exit; } tty = port->port_tty; if (tty == NULL) { printk(KERN_ERR "gs_recv_packet: port=%d, NULL tty pointer\n", port->port_num); ret = -EIO; goto exit; } if (port->port_tty->magic != TTY_MAGIC) { printk(KERN_ERR "gs_recv_packet: port=%d, bad tty magic\n", port->port_num); ret = -EIO; goto exit; } len = tty_buffer_request_room(tty, size); if (len > 0) { tty_insert_flip_string(tty, packet, len); tty_flip_buffer_push(port->port_tty); wake_up_interruptible(&port->port_tty->read_wait); } ret = 0; exit: spin_unlock(&port->port_lock); return ret; } /* * gs_read_complete */ static void gs_read_complete(struct usb_ep *ep, struct usb_request *req) { int ret; struct gs_dev *dev = ep->driver_data; if (dev == NULL) { printk(KERN_ERR "gs_read_complete: NULL device pointer\n"); return; } switch(req->status) { case 0: /* normal completion */ gs_recv_packet(dev, req->buf, req->actual); requeue: req->length = ep->maxpacket; if ((ret=usb_ep_queue(ep, req, GFP_ATOMIC))) { printk(KERN_ERR "gs_read_complete: cannot queue read request, ret=%d\n", ret); } break; case -ESHUTDOWN: /* disconnect */ gs_debug("gs_read_complete: shutdown\n"); gs_free_req(ep, req); break; default: /* unexpected */ printk(KERN_ERR "gs_read_complete: unexpected status error, status=%d\n", req->status); goto requeue; break; } } /* * gs_write_complete */ static void gs_write_complete(struct usb_ep *ep, struct usb_request *req) { struct gs_dev *dev = ep->driver_data; struct gs_req_entry *gs_req = req->context; if (dev == NULL) { printk(KERN_ERR "gs_write_complete: NULL device pointer\n"); return; } switch(req->status) { case 0: /* normal completion */ requeue: if (gs_req == NULL) { printk(KERN_ERR "gs_write_complete: NULL request pointer\n"); return; } spin_lock(&dev->dev_lock); list_add(&gs_req->re_entry, &dev->dev_req_list); spin_unlock(&dev->dev_lock); gs_send(dev); break; case -ESHUTDOWN: /* disconnect */ gs_debug("gs_write_complete: shutdown\n"); gs_free_req(ep, req); break; default: printk(KERN_ERR "gs_write_complete: unexpected status error, status=%d\n", req->status); goto requeue; break; } } /* Gadget Driver */ /* * gs_bind * * Called on module load. Allocates and initializes the device * structure and a control request. */ static int __init gs_bind(struct usb_gadget *gadget) { int ret; struct usb_ep *ep; struct gs_dev *dev; int gcnum; /* Some controllers can't support CDC ACM: * - sh doesn't support multiple interfaces or configs; * - sa1100 doesn't have a third interrupt endpoint */ if (gadget_is_sh(gadget) || gadget_is_sa1100(gadget)) use_acm = 0; gcnum = usb_gadget_controller_number(gadget); if (gcnum >= 0) gs_device_desc.bcdDevice = cpu_to_le16(GS_VERSION_NUM | gcnum); else { printk(KERN_WARNING "gs_bind: controller '%s' not recognized\n", gadget->name); /* unrecognized, but safe unless bulk is REALLY quirky */ gs_device_desc.bcdDevice = __constant_cpu_to_le16(GS_VERSION_NUM|0x0099); } usb_ep_autoconfig_reset(gadget); ep = usb_ep_autoconfig(gadget, &gs_fullspeed_in_desc); if (!ep) goto autoconf_fail; EP_IN_NAME = ep->name; ep->driver_data = ep; /* claim the endpoint */ ep = usb_ep_autoconfig(gadget, &gs_fullspeed_out_desc); if (!ep) goto autoconf_fail; EP_OUT_NAME = ep->name; ep->driver_data = ep; /* claim the endpoint */ if (use_acm) { ep = usb_ep_autoconfig(gadget, &gs_fullspeed_notify_desc); if (!ep) { printk(KERN_ERR "gs_bind: cannot run ACM on %s\n", gadget->name); goto autoconf_fail; } gs_device_desc.idProduct = __constant_cpu_to_le16( GS_CDC_PRODUCT_ID), EP_NOTIFY_NAME = ep->name; ep->driver_data = ep; /* claim the endpoint */ } gs_device_desc.bDeviceClass = use_acm ? USB_CLASS_COMM : USB_CLASS_VENDOR_SPEC; gs_device_desc.bMaxPacketSize0 = gadget->ep0->maxpacket; #ifdef CONFIG_USB_GADGET_DUALSPEED gs_qualifier_desc.bDeviceClass = use_acm ? USB_CLASS_COMM : USB_CLASS_VENDOR_SPEC; /* assume ep0 uses the same packet size for both speeds */ gs_qualifier_desc.bMaxPacketSize0 = gs_device_desc.bMaxPacketSize0; /* assume endpoints are dual-speed */ gs_highspeed_notify_desc.bEndpointAddress = gs_fullspeed_notify_desc.bEndpointAddress; gs_highspeed_in_desc.bEndpointAddress = gs_fullspeed_in_desc.bEndpointAddress; gs_highspeed_out_desc.bEndpointAddress = gs_fullspeed_out_desc.bEndpointAddress; #endif /* CONFIG_USB_GADGET_DUALSPEED */ usb_gadget_set_selfpowered(gadget); if (gadget->is_otg) { gs_otg_descriptor.bmAttributes |= USB_OTG_HNP, gs_bulk_config_desc.bmAttributes |= USB_CONFIG_ATT_WAKEUP; gs_acm_config_desc.bmAttributes |= USB_CONFIG_ATT_WAKEUP; } gs_device = dev = kmalloc(sizeof(struct gs_dev), GFP_KERNEL); if (dev == NULL) return -ENOMEM; snprintf(manufacturer, sizeof(manufacturer), "%s %s with %s", init_utsname()->sysname, init_utsname()->release, gadget->name); memset(dev, 0, sizeof(struct gs_dev)); dev->dev_gadget = gadget; spin_lock_init(&dev->dev_lock); INIT_LIST_HEAD(&dev->dev_req_list); set_gadget_data(gadget, dev); if ((ret=gs_alloc_ports(dev, GFP_KERNEL)) != 0) { printk(KERN_ERR "gs_bind: cannot allocate ports\n"); gs_unbind(gadget); return ret; } /* preallocate control response and buffer */ dev->dev_ctrl_req = gs_alloc_req(gadget->ep0, GS_MAX_DESC_LEN, GFP_KERNEL); if (dev->dev_ctrl_req == NULL) { gs_unbind(gadget); return -ENOMEM; } dev->dev_ctrl_req->complete = gs_setup_complete; gadget->ep0->driver_data = dev; printk(KERN_INFO "gs_bind: %s %s bound\n", GS_LONG_NAME, GS_VERSION_STR); return 0; autoconf_fail: printk(KERN_ERR "gs_bind: cannot autoconfigure on %s\n", gadget->name); return -ENODEV; } /* * gs_unbind * * Called on module unload. Frees the control request and device * structure. */ static void /* __init_or_exit */ gs_unbind(struct usb_gadget *gadget) { struct gs_dev *dev = get_gadget_data(gadget); gs_device = NULL; /* read/write requests already freed, only control request remains */ if (dev != NULL) { if (dev->dev_ctrl_req != NULL) { gs_free_req(gadget->ep0, dev->dev_ctrl_req); dev->dev_ctrl_req = NULL; } gs_free_ports(dev); kfree(dev); set_gadget_data(gadget, NULL); } printk(KERN_INFO "gs_unbind: %s %s unbound\n", GS_LONG_NAME, GS_VERSION_STR); } /* * gs_setup * * Implements all the control endpoint functionality that's not * handled in hardware or the hardware driver. * * Returns the size of the data sent to the host, or a negative * error number. */ static int gs_setup(struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl) { int ret = -EOPNOTSUPP; struct gs_dev *dev = get_gadget_data(gadget); struct usb_request *req = dev->dev_ctrl_req; u16 wIndex = le16_to_cpu(ctrl->wIndex); u16 wValue = le16_to_cpu(ctrl->wValue); u16 wLength = le16_to_cpu(ctrl->wLength); switch (ctrl->bRequestType & USB_TYPE_MASK) { case USB_TYPE_STANDARD: ret = gs_setup_standard(gadget,ctrl); break; case USB_TYPE_CLASS: ret = gs_setup_class(gadget,ctrl); break; default: printk(KERN_ERR "gs_setup: unknown request, type=%02x, request=%02x, value=%04x, index=%04x, length=%d\n", ctrl->bRequestType, ctrl->bRequest, wValue, wIndex, wLength); break; } /* respond with data transfer before status phase? */ if (ret >= 0) { req->length = ret; req->zero = ret < wLength && (ret % gadget->ep0->maxpacket) == 0; ret = usb_ep_queue(gadget->ep0, req, GFP_ATOMIC); if (ret < 0) { printk(KERN_ERR "gs_setup: cannot queue response, ret=%d\n", ret); req->status = 0; gs_setup_complete(gadget->ep0, req); } } /* device either stalls (ret < 0) or reports success */ return ret; } static int gs_setup_standard(struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl) { int ret = -EOPNOTSUPP; struct gs_dev *dev = get_gadget_data(gadget); struct usb_request *req = dev->dev_ctrl_req; u16 wIndex = le16_to_cpu(ctrl->wIndex); u16 wValue = le16_to_cpu(ctrl->wValue); u16 wLength = le16_to_cpu(ctrl->wLength); switch (ctrl->bRequest) { case USB_REQ_GET_DESCRIPTOR: if (ctrl->bRequestType != USB_DIR_IN) break; switch (wValue >> 8) { case USB_DT_DEVICE: ret = min(wLength, (u16)sizeof(struct usb_device_descriptor)); memcpy(req->buf, &gs_device_desc, ret); break; #ifdef CONFIG_USB_GADGET_DUALSPEED case USB_DT_DEVICE_QUALIFIER: if (!gadget->is_dualspeed) break; ret = min(wLength, (u16)sizeof(struct usb_qualifier_descriptor)); memcpy(req->buf, &gs_qualifier_desc, ret); break; case USB_DT_OTHER_SPEED_CONFIG: if (!gadget->is_dualspeed) break; /* fall through */ #endif /* CONFIG_USB_GADGET_DUALSPEED */ case USB_DT_CONFIG: ret = gs_build_config_buf(req->buf, gadget->speed, wValue >> 8, wValue & 0xff, gadget->is_otg); if (ret >= 0) ret = min(wLength, (u16)ret); break; case USB_DT_STRING: /* wIndex == language code. */ ret = usb_gadget_get_string(&gs_string_table, wValue & 0xff, req->buf); if (ret >= 0) ret = min(wLength, (u16)ret); break; } break; case USB_REQ_SET_CONFIGURATION: if (ctrl->bRequestType != 0) break; spin_lock(&dev->dev_lock); ret = gs_set_config(dev, wValue); spin_unlock(&dev->dev_lock); break; case USB_REQ_GET_CONFIGURATION: if (ctrl->bRequestType != USB_DIR_IN) break; *(u8 *)req->buf = dev->dev_config; ret = min(wLength, (u16)1); break; case USB_REQ_SET_INTERFACE: if (ctrl->bRequestType != USB_RECIP_INTERFACE || !dev->dev_config || wIndex >= GS_MAX_NUM_INTERFACES) break; if (dev->dev_config == GS_BULK_CONFIG_ID && wIndex != GS_BULK_INTERFACE_ID) break; /* no alternate interface settings */ if (wValue != 0) break; spin_lock(&dev->dev_lock); /* PXA hardware partially handles SET_INTERFACE; * we need to kluge around that interference. */ if (gadget_is_pxa(gadget)) { ret = gs_set_config(dev, use_acm ? GS_ACM_CONFIG_ID : GS_BULK_CONFIG_ID); goto set_interface_done; } if (dev->dev_config != GS_BULK_CONFIG_ID && wIndex == GS_CONTROL_INTERFACE_ID) { if (dev->dev_notify_ep) { usb_ep_disable(dev->dev_notify_ep); usb_ep_enable(dev->dev_notify_ep, dev->dev_notify_ep_desc); } } else { usb_ep_disable(dev->dev_in_ep); usb_ep_disable(dev->dev_out_ep); usb_ep_enable(dev->dev_in_ep, dev->dev_in_ep_desc); usb_ep_enable(dev->dev_out_ep, dev->dev_out_ep_desc); } ret = 0; set_interface_done: spin_unlock(&dev->dev_lock); break; case USB_REQ_GET_INTERFACE: if (ctrl->bRequestType != (USB_DIR_IN|USB_RECIP_INTERFACE) || dev->dev_config == GS_NO_CONFIG_ID) break; if (wIndex >= GS_MAX_NUM_INTERFACES || (dev->dev_config == GS_BULK_CONFIG_ID && wIndex != GS_BULK_INTERFACE_ID)) { ret = -EDOM; break; } /* no alternate interface settings */ *(u8 *)req->buf = 0; ret = min(wLength, (u16)1); break; default: printk(KERN_ERR "gs_setup: unknown standard request, type=%02x, request=%02x, value=%04x, index=%04x, length=%d\n", ctrl->bRequestType, ctrl->bRequest, wValue, wIndex, wLength); break; } return ret; } static int gs_setup_class(struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl) { int ret = -EOPNOTSUPP; struct gs_dev *dev = get_gadget_data(gadget); struct gs_port *port = dev->dev_port[0]; /* ACM only has one port */ struct usb_request *req = dev->dev_ctrl_req; u16 wIndex = le16_to_cpu(ctrl->wIndex); u16 wValue = le16_to_cpu(ctrl->wValue); u16 wLength = le16_to_cpu(ctrl->wLength); switch (ctrl->bRequest) { case USB_CDC_REQ_SET_LINE_CODING: ret = min(wLength, (u16)sizeof(struct usb_cdc_line_coding)); if (port) { spin_lock(&port->port_lock); memcpy(&port->port_line_coding, req->buf, ret); spin_unlock(&port->port_lock); } break; case USB_CDC_REQ_GET_LINE_CODING: port = dev->dev_port[0]; /* ACM only has one port */ ret = min(wLength, (u16)sizeof(struct usb_cdc_line_coding)); if (port) { spin_lock(&port->port_lock); memcpy(req->buf, &port->port_line_coding, ret); spin_unlock(&port->port_lock); } break; case USB_CDC_REQ_SET_CONTROL_LINE_STATE: ret = 0; break; default: printk(KERN_ERR "gs_setup: unknown class request, type=%02x, request=%02x, value=%04x, index=%04x, length=%d\n", ctrl->bRequestType, ctrl->bRequest, wValue, wIndex, wLength); break; } return ret; } /* * gs_setup_complete */ static void gs_setup_complete(struct usb_ep *ep, struct usb_request *req) { if (req->status || req->actual != req->length) { printk(KERN_ERR "gs_setup_complete: status error, status=%d, actual=%d, length=%d\n", req->status, req->actual, req->length); } } /* * gs_disconnect * * Called when the device is disconnected. Frees the closed * ports and disconnects open ports. Open ports will be freed * on close. Then reallocates the ports for the next connection. */ static void gs_disconnect(struct usb_gadget *gadget) { unsigned long flags; struct gs_dev *dev = get_gadget_data(gadget); spin_lock_irqsave(&dev->dev_lock, flags); gs_reset_config(dev); /* free closed ports and disconnect open ports */ /* (open ports will be freed when closed) */ gs_free_ports(dev); /* re-allocate ports for the next connection */ if (gs_alloc_ports(dev, GFP_ATOMIC) != 0) printk(KERN_ERR "gs_disconnect: cannot re-allocate ports\n"); spin_unlock_irqrestore(&dev->dev_lock, flags); printk(KERN_INFO "gs_disconnect: %s disconnected\n", GS_LONG_NAME); } /* * gs_set_config * * Configures the device by enabling device specific * optimizations, setting up the endpoints, allocating * read and write requests and queuing read requests. * * The device lock must be held when calling this function. */ static int gs_set_config(struct gs_dev *dev, unsigned config) { int i; int ret = 0; struct usb_gadget *gadget = dev->dev_gadget; struct usb_ep *ep; struct usb_endpoint_descriptor *ep_desc; struct usb_request *req; struct gs_req_entry *req_entry; if (dev == NULL) { printk(KERN_ERR "gs_set_config: NULL device pointer\n"); return 0; } if (config == dev->dev_config) return 0; gs_reset_config(dev); switch (config) { case GS_NO_CONFIG_ID: return 0; case GS_BULK_CONFIG_ID: if (use_acm) return -EINVAL; /* device specific optimizations */ if (gadget_is_net2280(gadget)) net2280_set_fifo_mode(gadget, 1); break; case GS_ACM_CONFIG_ID: if (!use_acm) return -EINVAL; /* device specific optimizations */ if (gadget_is_net2280(gadget)) net2280_set_fifo_mode(gadget, 1); break; default: return -EINVAL; } dev->dev_config = config; gadget_for_each_ep(ep, gadget) { if (EP_NOTIFY_NAME && strcmp(ep->name, EP_NOTIFY_NAME) == 0) { ep_desc = GS_SPEED_SELECT( gadget->speed == USB_SPEED_HIGH, &gs_highspeed_notify_desc, &gs_fullspeed_notify_desc); ret = usb_ep_enable(ep,ep_desc); if (ret == 0) { ep->driver_data = dev; dev->dev_notify_ep = ep; dev->dev_notify_ep_desc = ep_desc; } else { printk(KERN_ERR "gs_set_config: cannot enable notify endpoint %s, ret=%d\n", ep->name, ret); goto exit_reset_config; } } else if (strcmp(ep->name, EP_IN_NAME) == 0) { ep_desc = GS_SPEED_SELECT( gadget->speed == USB_SPEED_HIGH, &gs_highspeed_in_desc, &gs_fullspeed_in_desc); ret = usb_ep_enable(ep,ep_desc); if (ret == 0) { ep->driver_data = dev; dev->dev_in_ep = ep; dev->dev_in_ep_desc = ep_desc; } else { printk(KERN_ERR "gs_set_config: cannot enable in endpoint %s, ret=%d\n", ep->name, ret); goto exit_reset_config; } } else if (strcmp(ep->name, EP_OUT_NAME) == 0) { ep_desc = GS_SPEED_SELECT( gadget->speed == USB_SPEED_HIGH, &gs_highspeed_out_desc, &gs_fullspeed_out_desc); ret = usb_ep_enable(ep,ep_desc); if (ret == 0) { ep->driver_data = dev; dev->dev_out_ep = ep; dev->dev_out_ep_desc = ep_desc; } else { printk(KERN_ERR "gs_set_config: cannot enable out endpoint %s, ret=%d\n", ep->name, ret); goto exit_reset_config; } } } if (dev->dev_in_ep == NULL || dev->dev_out_ep == NULL || (config != GS_BULK_CONFIG_ID && dev->dev_notify_ep == NULL)) { printk(KERN_ERR "gs_set_config: cannot find endpoints\n"); ret = -ENODEV; goto exit_reset_config; } /* allocate and queue read requests */ ep = dev->dev_out_ep; for (i=0; imaxpacket, GFP_ATOMIC))) { req->complete = gs_read_complete; if ((ret=usb_ep_queue(ep, req, GFP_ATOMIC))) { printk(KERN_ERR "gs_set_config: cannot queue read request, ret=%d\n", ret); } } else { printk(KERN_ERR "gs_set_config: cannot allocate read requests\n"); ret = -ENOMEM; goto exit_reset_config; } } /* allocate write requests, and put on free list */ ep = dev->dev_in_ep; for (i=0; imaxpacket, GFP_ATOMIC))) { req_entry->re_req->complete = gs_write_complete; list_add(&req_entry->re_entry, &dev->dev_req_list); } else { printk(KERN_ERR "gs_set_config: cannot allocate write requests\n"); ret = -ENOMEM; goto exit_reset_config; } } printk(KERN_INFO "gs_set_config: %s configured, %s speed %s config\n", GS_LONG_NAME, gadget->speed == USB_SPEED_HIGH ? "high" : "full", config == GS_BULK_CONFIG_ID ? "BULK" : "CDC-ACM"); return 0; exit_reset_config: gs_reset_config(dev); return ret; } /* * gs_reset_config * * Mark the device as not configured, disable all endpoints, * which forces completion of pending I/O and frees queued * requests, and free the remaining write requests on the * free list. * * The device lock must be held when calling this function. */ static void gs_reset_config(struct gs_dev *dev) { struct gs_req_entry *req_entry; if (dev == NULL) { printk(KERN_ERR "gs_reset_config: NULL device pointer\n"); return; } if (dev->dev_config == GS_NO_CONFIG_ID) return; dev->dev_config = GS_NO_CONFIG_ID; /* free write requests on the free list */ while(!list_empty(&dev->dev_req_list)) { req_entry = list_entry(dev->dev_req_list.next, struct gs_req_entry, re_entry); list_del(&req_entry->re_entry); gs_free_req_entry(dev->dev_in_ep, req_entry); } /* disable endpoints, forcing completion of pending i/o; */ /* completion handlers free their requests in this case */ if (dev->dev_notify_ep) { usb_ep_disable(dev->dev_notify_ep); dev->dev_notify_ep = NULL; } if (dev->dev_in_ep) { usb_ep_disable(dev->dev_in_ep); dev->dev_in_ep = NULL; } if (dev->dev_out_ep) { usb_ep_disable(dev->dev_out_ep); dev->dev_out_ep = NULL; } } /* * gs_build_config_buf * * Builds the config descriptors in the given buffer and returns the * length, or a negative error number. */ static int gs_build_config_buf(u8 *buf, enum usb_device_speed speed, u8 type, unsigned int index, int is_otg) { int len; int high_speed; const struct usb_config_descriptor *config_desc; const struct usb_descriptor_header **function; if (index >= gs_device_desc.bNumConfigurations) return -EINVAL; /* other speed switches high and full speed */ high_speed = (speed == USB_SPEED_HIGH); if (type == USB_DT_OTHER_SPEED_CONFIG) high_speed = !high_speed; if (use_acm) { config_desc = &gs_acm_config_desc; function = GS_SPEED_SELECT(high_speed, gs_acm_highspeed_function, gs_acm_fullspeed_function); } else { config_desc = &gs_bulk_config_desc; function = GS_SPEED_SELECT(high_speed, gs_bulk_highspeed_function, gs_bulk_fullspeed_function); } /* for now, don't advertise srp-only devices */ if (!is_otg) function++; len = usb_gadget_config_buf(config_desc, buf, GS_MAX_DESC_LEN, function); if (len < 0) return len; ((struct usb_config_descriptor *)buf)->bDescriptorType = type; return len; } /* * gs_alloc_req * * Allocate a usb_request and its buffer. Returns a pointer to the * usb_request or NULL if there is an error. */ static struct usb_request * gs_alloc_req(struct usb_ep *ep, unsigned int len, gfp_t kmalloc_flags) { struct usb_request *req; if (ep == NULL) return NULL; req = usb_ep_alloc_request(ep, kmalloc_flags); if (req != NULL) { req->length = len; req->buf = kmalloc(len, kmalloc_flags); if (req->buf == NULL) { usb_ep_free_request(ep, req); return NULL; } } return req; } /* * gs_free_req * * Free a usb_request and its buffer. */ static void gs_free_req(struct usb_ep *ep, struct usb_request *req) { if (ep != NULL && req != NULL) { kfree(req->buf); usb_ep_free_request(ep, req); } } /* * gs_alloc_req_entry * * Allocates a request and its buffer, using the given * endpoint, buffer len, and kmalloc flags. */ static struct gs_req_entry * gs_alloc_req_entry(struct usb_ep *ep, unsigned len, gfp_t kmalloc_flags) { struct gs_req_entry *req; req = kmalloc(sizeof(struct gs_req_entry), kmalloc_flags); if (req == NULL) return NULL; req->re_req = gs_alloc_req(ep, len, kmalloc_flags); if (req->re_req == NULL) { kfree(req); return NULL; } req->re_req->context = req; return req; } /* * gs_free_req_entry * * Frees a request and its buffer. */ static void gs_free_req_entry(struct usb_ep *ep, struct gs_req_entry *req) { if (ep != NULL && req != NULL) { if (req->re_req != NULL) gs_free_req(ep, req->re_req); kfree(req); } } /* * gs_alloc_ports * * Allocate all ports and set the gs_dev struct to point to them. * Return 0 if successful, or a negative error number. * * The device lock is normally held when calling this function. */ static int gs_alloc_ports(struct gs_dev *dev, gfp_t kmalloc_flags) { int i; struct gs_port *port; if (dev == NULL) return -EIO; for (i=0; iport_dev = dev; port->port_num = i; port->port_line_coding.dwDTERate = cpu_to_le32(GS_DEFAULT_DTE_RATE); port->port_line_coding.bCharFormat = GS_DEFAULT_CHAR_FORMAT; port->port_line_coding.bParityType = GS_DEFAULT_PARITY; port->port_line_coding.bDataBits = GS_DEFAULT_DATA_BITS; spin_lock_init(&port->port_lock); init_waitqueue_head(&port->port_write_wait); dev->dev_port[i] = port; } return 0; } /* * gs_free_ports * * Free all closed ports. Open ports are disconnected by * freeing their write buffers, setting their device pointers * and the pointers to them in the device to NULL. These * ports will be freed when closed. * * The device lock is normally held when calling this function. */ static void gs_free_ports(struct gs_dev *dev) { int i; unsigned long flags; struct gs_port *port; if (dev == NULL) return; for (i=0; idev_port[i]) != NULL) { dev->dev_port[i] = NULL; spin_lock_irqsave(&port->port_lock, flags); if (port->port_write_buf != NULL) { gs_buf_free(port->port_write_buf); port->port_write_buf = NULL; } if (port->port_open_count > 0 || port->port_in_use) { port->port_dev = NULL; wake_up_interruptible(&port->port_write_wait); if (port->port_tty) { wake_up_interruptible(&port->port_tty->read_wait); wake_up_interruptible(&port->port_tty->write_wait); } spin_unlock_irqrestore(&port->port_lock, flags); } else { spin_unlock_irqrestore(&port->port_lock, flags); kfree(port); } } } } /* Circular Buffer */ /* * gs_buf_alloc * * Allocate a circular buffer and all associated memory. */ static struct gs_buf *gs_buf_alloc(unsigned int size, gfp_t kmalloc_flags) { struct gs_buf *gb; if (size == 0) return NULL; gb = kmalloc(sizeof(struct gs_buf), kmalloc_flags); if (gb == NULL) return NULL; gb->buf_buf = kmalloc(size, kmalloc_flags); if (gb->buf_buf == NULL) { kfree(gb); return NULL; } gb->buf_size = size; gb->buf_get = gb->buf_put = gb->buf_buf; return gb; } /* * gs_buf_free * * Free the buffer and all associated memory. */ void gs_buf_free(struct gs_buf *gb) { if (gb) { kfree(gb->buf_buf); kfree(gb); } } /* * gs_buf_clear * * Clear out all data in the circular buffer. */ void gs_buf_clear(struct gs_buf *gb) { if (gb != NULL) gb->buf_get = gb->buf_put; /* equivalent to a get of all data available */ } /* * gs_buf_data_avail * * Return the number of bytes of data available in the circular * buffer. */ unsigned int gs_buf_data_avail(struct gs_buf *gb) { if (gb != NULL) return (gb->buf_size + gb->buf_put - gb->buf_get) % gb->buf_size; else return 0; } /* * gs_buf_space_avail * * Return the number of bytes of space available in the circular * buffer. */ unsigned int gs_buf_space_avail(struct gs_buf *gb) { if (gb != NULL) return (gb->buf_size + gb->buf_get - gb->buf_put - 1) % gb->buf_size; else return 0; } /* * gs_buf_put * * Copy data data from a user buffer and put it into the circular buffer. * Restrict to the amount of space available. * * Return the number of bytes copied. */ unsigned int gs_buf_put(struct gs_buf *gb, const char *buf, unsigned int count) { unsigned int len; if (gb == NULL) return 0; len = gs_buf_space_avail(gb); if (count > len) count = len; if (count == 0) return 0; len = gb->buf_buf + gb->buf_size - gb->buf_put; if (count > len) { memcpy(gb->buf_put, buf, len); memcpy(gb->buf_buf, buf+len, count - len); gb->buf_put = gb->buf_buf + count - len; } else { memcpy(gb->buf_put, buf, count); if (count < len) gb->buf_put += count; else /* count == len */ gb->buf_put = gb->buf_buf; } return count; } /* * gs_buf_get * * Get data from the circular buffer and copy to the given buffer. * Restrict to the amount of data available. * * Return the number of bytes copied. */ unsigned int gs_buf_get(struct gs_buf *gb, char *buf, unsigned int count) { unsigned int len; if (gb == NULL) return 0; len = gs_buf_data_avail(gb); if (count > len) count = len; if (count == 0) return 0; len = gb->buf_buf + gb->buf_size - gb->buf_get; if (count > len) { memcpy(buf, gb->buf_get, len); memcpy(buf+len, gb->buf_buf, count - len); gb->buf_get = gb->buf_buf + count - len; } else { memcpy(buf, gb->buf_get, count); if (count < len) gb->buf_get += count; else /* count == len */ gb->buf_get = gb->buf_buf; } return count; }