/* * ether.c -- Ethernet gadget driver, with CDC and non-CDC options * * Copyright (C) 2003-2005 David Brownell * Copyright (C) 2003-2004 Robert Schwebel, Benedikt Spranger * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ // #define DEBUG 1 // #define VERBOSE #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "gadget_chips.h" /*-------------------------------------------------------------------------*/ /* * Ethernet gadget driver -- with CDC and non-CDC options * Builds on hardware support for a full duplex link. * * CDC Ethernet is the standard USB solution for sending Ethernet frames * using USB. Real hardware tends to use the same framing protocol but look * different for control features. This driver strongly prefers to use * this USB-IF standard as its open-systems interoperability solution; * most host side USB stacks (except from Microsoft) support it. * * There's some hardware that can't talk CDC. We make that hardware * implement a "minimalist" vendor-agnostic CDC core: same framing, but * link-level setup only requires activating the configuration. Only the * endpoint descriptors, and product/vendor IDs, are relevant; no control * operations are available. Linux supports it, but other host operating * systems may not. (This is a subset of CDC Ethernet.) * * It turns out that if you add a few descriptors to that "CDC Subset", * (Windows) host side drivers from MCCI can treat it as one submode of * a proprietary scheme called "SAFE" ... without needing to know about * specific product/vendor IDs. So we do that, making it easier to use * those MS-Windows drivers. Those added descriptors make it resemble a * CDC MDLM device, but they don't change device behavior at all. (See * MCCI Engineering report 950198 "SAFE Networking Functions".) * * A third option is also in use. Rather than CDC Ethernet, or something * simpler, Microsoft pushes their own approach: RNDIS. The published * RNDIS specs are ambiguous and appear to be incomplete, and are also * needlessly complex. */ #define DRIVER_DESC "Ethernet Gadget" #define DRIVER_VERSION "May Day 2005" static const char shortname [] = "ether"; static const char driver_desc [] = DRIVER_DESC; #define RX_EXTRA 20 /* guard against rx overflows */ #include "rndis.h" #ifndef CONFIG_USB_ETH_RNDIS #define rndis_uninit(x) do{}while(0) #define rndis_deregister(c) do{}while(0) #define rndis_exit() do{}while(0) #endif /* CDC and RNDIS support the same host-chosen outgoing packet filters. */ #define DEFAULT_FILTER (USB_CDC_PACKET_TYPE_BROADCAST \ |USB_CDC_PACKET_TYPE_ALL_MULTICAST \ |USB_CDC_PACKET_TYPE_PROMISCUOUS \ |USB_CDC_PACKET_TYPE_DIRECTED) /*-------------------------------------------------------------------------*/ struct eth_dev { spinlock_t lock; struct usb_gadget *gadget; struct usb_request *req; /* for control responses */ struct usb_request *stat_req; /* for cdc & rndis status */ u8 config; struct usb_ep *in_ep, *out_ep, *status_ep; const struct usb_endpoint_descriptor *in, *out, *status; spinlock_t req_lock; struct list_head tx_reqs, rx_reqs; struct net_device *net; struct net_device_stats stats; atomic_t tx_qlen; struct work_struct work; unsigned zlp:1; unsigned cdc:1; unsigned rndis:1; unsigned suspended:1; u16 cdc_filter; unsigned long todo; #define WORK_RX_MEMORY 0 int rndis_config; u8 host_mac [ETH_ALEN]; }; /* This version autoconfigures as much as possible at run-time. * * It also ASSUMES a self-powered device, without remote wakeup, * although remote wakeup support would make sense. */ /*-------------------------------------------------------------------------*/ /* DO NOT REUSE THESE IDs with a protocol-incompatible driver!! Ever!! * Instead: allocate your own, using normal USB-IF procedures. */ /* Thanks to NetChip Technologies for donating this product ID. * It's for devices with only CDC Ethernet configurations. */ #define CDC_VENDOR_NUM 0x0525 /* NetChip */ #define CDC_PRODUCT_NUM 0xa4a1 /* Linux-USB Ethernet Gadget */ /* For hardware that can't talk CDC, we use the same vendor ID that * ARM Linux has used for ethernet-over-usb, both with sa1100 and * with pxa250. We're protocol-compatible, if the host-side drivers * use the endpoint descriptors. bcdDevice (version) is nonzero, so * drivers that need to hard-wire endpoint numbers have a hook. * * The protocol is a minimal subset of CDC Ether, which works on any bulk * hardware that's not deeply broken ... even on hardware that can't talk * RNDIS (like SA-1100, with no interrupt endpoint, or anything that * doesn't handle control-OUT). */ #define SIMPLE_VENDOR_NUM 0x049f #define SIMPLE_PRODUCT_NUM 0x505a /* For hardware that can talk RNDIS and either of the above protocols, * use this ID ... the windows INF files will know it. Unless it's * used with CDC Ethernet, Linux 2.4 hosts will need updates to choose * the non-RNDIS configuration. */ #define RNDIS_VENDOR_NUM 0x0525 /* NetChip */ #define RNDIS_PRODUCT_NUM 0xa4a2 /* Ethernet/RNDIS Gadget */ /* Some systems will want different product identifers published in the * device descriptor, either numbers or strings or both. These string * parameters are in UTF-8 (superset of ASCII's 7 bit characters). */ static ushort idVendor; module_param(idVendor, ushort, S_IRUGO); MODULE_PARM_DESC(idVendor, "USB Vendor ID"); static ushort idProduct; module_param(idProduct, ushort, S_IRUGO); MODULE_PARM_DESC(idProduct, "USB Product ID"); static ushort bcdDevice; module_param(bcdDevice, ushort, S_IRUGO); MODULE_PARM_DESC(bcdDevice, "USB Device version (BCD)"); static char *iManufacturer; module_param(iManufacturer, charp, S_IRUGO); MODULE_PARM_DESC(iManufacturer, "USB Manufacturer string"); static char *iProduct; module_param(iProduct, charp, S_IRUGO); MODULE_PARM_DESC(iProduct, "USB Product string"); static char *iSerialNumber; module_param(iSerialNumber, charp, S_IRUGO); MODULE_PARM_DESC(iSerialNumber, "SerialNumber"); /* initial value, changed by "ifconfig usb0 hw ether xx:xx:xx:xx:xx:xx" */ static char *dev_addr; module_param(dev_addr, charp, S_IRUGO); MODULE_PARM_DESC(dev_addr, "Device Ethernet Address"); /* this address is invisible to ifconfig */ static char *host_addr; module_param(host_addr, charp, S_IRUGO); MODULE_PARM_DESC(host_addr, "Host Ethernet Address"); /*-------------------------------------------------------------------------*/ /* Include CDC support if we could run on CDC-capable hardware. */ #ifdef CONFIG_USB_GADGET_NET2280 #define DEV_CONFIG_CDC #endif #ifdef CONFIG_USB_GADGET_DUMMY_HCD #define DEV_CONFIG_CDC #endif #ifdef CONFIG_USB_GADGET_GOKU #define DEV_CONFIG_CDC #endif #ifdef CONFIG_USB_GADGET_LH7A40X #define DEV_CONFIG_CDC #endif #ifdef CONFIG_USB_GADGET_MQ11XX #define DEV_CONFIG_CDC #endif #ifdef CONFIG_USB_GADGET_OMAP #define DEV_CONFIG_CDC #endif #ifdef CONFIG_USB_GADGET_N9604 #define DEV_CONFIG_CDC #endif #ifdef CONFIG_USB_GADGET_PXA27X #define DEV_CONFIG_CDC #endif #ifdef CONFIG_USB_GADGET_S3C2410 #define DEV_CONFIG_CDC #endif #ifdef CONFIG_USB_GADGET_AT91 #define DEV_CONFIG_CDC #endif #ifdef CONFIG_USB_GADGET_MUSBHSFC #define DEV_CONFIG_CDC #endif #ifdef CONFIG_USB_GADGET_MUSB_HDRC #define DEV_CONFIG_CDC #endif #ifdef CONFIG_USB_GADGET_HUSB2DEV #define DEV_CONFIG_CDC #endif /* For CDC-incapable hardware, choose the simple cdc subset. * Anything that talks bulk (without notable bugs) can do this. */ #ifdef CONFIG_USB_GADGET_PXA2XX #define DEV_CONFIG_SUBSET #endif #ifdef CONFIG_USB_GADGET_SH #define DEV_CONFIG_SUBSET #endif #ifdef CONFIG_USB_GADGET_SA1100 /* use non-CDC for backwards compatibility */ #define DEV_CONFIG_SUBSET #endif /*-------------------------------------------------------------------------*/ /* "main" config is either CDC, or its simple subset */ static inline int is_cdc(struct eth_dev *dev) { #if !defined(DEV_CONFIG_SUBSET) return 1; /* only cdc possible */ #elif !defined (DEV_CONFIG_CDC) return 0; /* only subset possible */ #else return dev->cdc; /* depends on what hardware we found */ #endif } /* "secondary" RNDIS config may sometimes be activated */ static inline int rndis_active(struct eth_dev *dev) { #ifdef CONFIG_USB_ETH_RNDIS return dev->rndis; #else return 0; #endif } #define subset_active(dev) (!is_cdc(dev) && !rndis_active(dev)) #define cdc_active(dev) ( is_cdc(dev) && !rndis_active(dev)) #define DEFAULT_QLEN 2 /* double buffering by default */ /* peak bulk transfer bits-per-second */ #define HS_BPS (13 * 512 * 8 * 1000 * 8) #define FS_BPS (19 * 64 * 1 * 1000 * 8) #ifdef CONFIG_USB_GADGET_DUALSPEED #define DEVSPEED USB_SPEED_HIGH static unsigned qmult = 5; module_param (qmult, uint, S_IRUGO|S_IWUSR); /* for dual-speed hardware, use deeper queues at highspeed */ #define qlen(gadget) \ (DEFAULT_QLEN*((gadget->speed == USB_SPEED_HIGH) ? qmult : 1)) /* also defer IRQs on highspeed TX */ #define TX_DELAY qmult static inline int BITRATE(struct usb_gadget *g) { return (g->speed == USB_SPEED_HIGH) ? HS_BPS : FS_BPS; } #else /* full speed (low speed doesn't do bulk) */ #define DEVSPEED USB_SPEED_FULL #define qlen(gadget) DEFAULT_QLEN static inline int BITRATE(struct usb_gadget *g) { return FS_BPS; } #endif /*-------------------------------------------------------------------------*/ #define xprintk(d,level,fmt,args...) \ printk(level "%s: " fmt , (d)->net->name , ## args) #ifdef DEBUG #undef DEBUG #define DEBUG(dev,fmt,args...) \ xprintk(dev , KERN_DEBUG , fmt , ## args) #else #define DEBUG(dev,fmt,args...) \ do { } while (0) #endif /* DEBUG */ #ifdef VERBOSE #define VDEBUG DEBUG #else #define VDEBUG(dev,fmt,args...) \ do { } while (0) #endif /* DEBUG */ #define ERROR(dev,fmt,args...) \ xprintk(dev , KERN_ERR , fmt , ## args) #define WARN(dev,fmt,args...) \ xprintk(dev , KERN_WARNING , fmt , ## args) #define INFO(dev,fmt,args...) \ xprintk(dev , KERN_INFO , fmt , ## args) /*-------------------------------------------------------------------------*/ /* USB DRIVER HOOKUP (to the hardware driver, below us), mostly * ep0 implementation: descriptors, config management, setup(). * also optional class-specific notification interrupt transfer. */ /* * DESCRIPTORS ... most are static, but strings and (full) configuration * descriptors are built on demand. For now we do either full CDC, or * our simple subset, with RNDIS as an optional second configuration. * * RNDIS includes some CDC ACM descriptors ... like CDC Ethernet. But * the class descriptors match a modem (they're ignored; it's really just * Ethernet functionality), they don't need the NOP altsetting, and the * status transfer endpoint isn't optional. */ #define STRING_MANUFACTURER 1 #define STRING_PRODUCT 2 #define STRING_ETHADDR 3 #define STRING_DATA 4 #define STRING_CONTROL 5 #define STRING_RNDIS_CONTROL 6 #define STRING_CDC 7 #define STRING_SUBSET 8 #define STRING_RNDIS 9 #define STRING_SERIALNUMBER 10 /* holds our biggest descriptor (or RNDIS response) */ #define USB_BUFSIZ 256 /* * This device advertises one configuration, eth_config, unless RNDIS * is enabled (rndis_config) on hardware supporting at least two configs. * * NOTE: Controllers like superh_udc should probably be able to use * an RNDIS-only configuration. * * FIXME define some higher-powered configurations to make it easier * to recharge batteries ... */ #define DEV_CONFIG_VALUE 1 /* cdc or subset */ #define DEV_RNDIS_CONFIG_VALUE 2 /* rndis; optional */ static struct usb_device_descriptor device_desc = { .bLength = sizeof device_desc, .bDescriptorType = USB_DT_DEVICE, .bcdUSB = __constant_cpu_to_le16 (0x0200), .bDeviceClass = USB_CLASS_COMM, .bDeviceSubClass = 0, .bDeviceProtocol = 0, .idVendor = __constant_cpu_to_le16 (CDC_VENDOR_NUM), .idProduct = __constant_cpu_to_le16 (CDC_PRODUCT_NUM), .iManufacturer = STRING_MANUFACTURER, .iProduct = STRING_PRODUCT, .bNumConfigurations = 1, }; static struct usb_otg_descriptor otg_descriptor = { .bLength = sizeof otg_descriptor, .bDescriptorType = USB_DT_OTG, .bmAttributes = USB_OTG_SRP, }; static struct usb_config_descriptor eth_config = { .bLength = sizeof eth_config, .bDescriptorType = USB_DT_CONFIG, /* compute wTotalLength on the fly */ .bNumInterfaces = 2, .bConfigurationValue = DEV_CONFIG_VALUE, .iConfiguration = STRING_CDC, .bmAttributes = USB_CONFIG_ATT_ONE | USB_CONFIG_ATT_SELFPOWER, .bMaxPower = 50, }; #ifdef CONFIG_USB_ETH_RNDIS static struct usb_config_descriptor rndis_config = { .bLength = sizeof rndis_config, .bDescriptorType = USB_DT_CONFIG, /* compute wTotalLength on the fly */ .bNumInterfaces = 2, .bConfigurationValue = DEV_RNDIS_CONFIG_VALUE, .iConfiguration = STRING_RNDIS, .bmAttributes = USB_CONFIG_ATT_ONE | USB_CONFIG_ATT_SELFPOWER, .bMaxPower = 50, }; #endif /* * Compared to the simple CDC subset, the full CDC Ethernet model adds * three class descriptors, two interface descriptors, optional status * endpoint. Both have a "data" interface and two bulk endpoints. * There are also differences in how control requests are handled. * * RNDIS shares a lot with CDC-Ethernet, since it's a variant of the * CDC-ACM (modem) spec. Unfortunately MSFT's RNDIS driver is buggy; it * may hang or oops. Since bugfixes (or accurate specs, letting Linux * work around those bugs) are unlikely to ever come from MSFT, you may * wish to avoid using RNDIS. * * MCCI offers an alternative to RNDIS if you need to connect to Windows * but have hardware that can't support CDC Ethernet. We add descriptors * to present the CDC Subset as a (nonconformant) CDC MDLM variant called * "SAFE". That borrows from both CDC Ethernet and CDC MDLM. You can * get those drivers from MCCI, or bundled with various products. */ #ifdef DEV_CONFIG_CDC static struct usb_interface_descriptor control_intf = { .bLength = sizeof control_intf, .bDescriptorType = USB_DT_INTERFACE, .bInterfaceNumber = 0, /* status endpoint is optional; this may be patched later */ .bNumEndpoints = 1, .bInterfaceClass = USB_CLASS_COMM, .bInterfaceSubClass = USB_CDC_SUBCLASS_ETHERNET, .bInterfaceProtocol = USB_CDC_PROTO_NONE, .iInterface = STRING_CONTROL, }; #endif #ifdef CONFIG_USB_ETH_RNDIS static const struct usb_interface_descriptor rndis_control_intf = { .bLength = sizeof rndis_control_intf, .bDescriptorType = USB_DT_INTERFACE, .bInterfaceNumber = 0, .bNumEndpoints = 1, .bInterfaceClass = USB_CLASS_COMM, .bInterfaceSubClass = USB_CDC_SUBCLASS_ACM, .bInterfaceProtocol = USB_CDC_ACM_PROTO_VENDOR, .iInterface = STRING_RNDIS_CONTROL, }; #endif static const struct usb_cdc_header_desc header_desc = { .bLength = sizeof header_desc, .bDescriptorType = USB_DT_CS_INTERFACE, .bDescriptorSubType = USB_CDC_HEADER_TYPE, .bcdCDC = __constant_cpu_to_le16 (0x0110), }; #if defined(DEV_CONFIG_CDC) || defined(CONFIG_USB_ETH_RNDIS) static const struct usb_cdc_union_desc union_desc = { .bLength = sizeof union_desc, .bDescriptorType = USB_DT_CS_INTERFACE, .bDescriptorSubType = USB_CDC_UNION_TYPE, .bMasterInterface0 = 0, /* index of control interface */ .bSlaveInterface0 = 1, /* index of DATA interface */ }; #endif /* CDC || RNDIS */ #ifdef CONFIG_USB_ETH_RNDIS static const struct usb_cdc_call_mgmt_descriptor call_mgmt_descriptor = { .bLength = sizeof call_mgmt_descriptor, .bDescriptorType = USB_DT_CS_INTERFACE, .bDescriptorSubType = USB_CDC_CALL_MANAGEMENT_TYPE, .bmCapabilities = 0x00, .bDataInterface = 0x01, }; static const struct usb_cdc_acm_descriptor acm_descriptor = { .bLength = sizeof acm_descriptor, .bDescriptorType = USB_DT_CS_INTERFACE, .bDescriptorSubType = USB_CDC_ACM_TYPE, .bmCapabilities = 0x00, }; #endif #ifndef DEV_CONFIG_CDC /* "SAFE" loosely follows CDC WMC MDLM, violating the spec in various * ways: data endpoints live in the control interface, there's no data * interface, and it's not used to talk to a cell phone radio. */ static const struct usb_cdc_mdlm_desc mdlm_desc = { .bLength = sizeof mdlm_desc, .bDescriptorType = USB_DT_CS_INTERFACE, .bDescriptorSubType = USB_CDC_MDLM_TYPE, .bcdVersion = __constant_cpu_to_le16(0x0100), .bGUID = { 0x5d, 0x34, 0xcf, 0x66, 0x11, 0x18, 0x11, 0xd6, 0xa2, 0x1a, 0x00, 0x01, 0x02, 0xca, 0x9a, 0x7f, }, }; /* since "usb_cdc_mdlm_detail_desc" is a variable length structure, we * can't really use its struct. All we do here is say that we're using * the submode of "SAFE" which directly matches the CDC Subset. */ static const u8 mdlm_detail_desc[] = { 6, USB_DT_CS_INTERFACE, USB_CDC_MDLM_DETAIL_TYPE, 0, /* "SAFE" */ 0, /* network control capabilities (none) */ 0, /* network data capabilities ("raw" encapsulation) */ }; #endif static const struct usb_cdc_ether_desc ether_desc = { .bLength = sizeof ether_desc, .bDescriptorType = USB_DT_CS_INTERFACE, .bDescriptorSubType = USB_CDC_ETHERNET_TYPE, /* this descriptor actually adds value, surprise! */ .iMACAddress = STRING_ETHADDR, .bmEthernetStatistics = __constant_cpu_to_le32 (0), /* no statistics */ .wMaxSegmentSize = __constant_cpu_to_le16 (ETH_FRAME_LEN), .wNumberMCFilters = __constant_cpu_to_le16 (0), .bNumberPowerFilters = 0, }; #if defined(DEV_CONFIG_CDC) || defined(CONFIG_USB_ETH_RNDIS) /* include the status endpoint if we can, even where it's optional. * use wMaxPacketSize big enough to fit CDC_NOTIFY_SPEED_CHANGE in one * packet, to simplify cancellation; and a big transfer interval, to * waste less bandwidth. * * some drivers (like Linux 2.4 cdc-ether!) "need" it to exist even * if they ignore the connect/disconnect notifications that real aether * can provide. more advanced cdc configurations might want to support * encapsulated commands (vendor-specific, using control-OUT). * * RNDIS requires the status endpoint, since it uses that encapsulation * mechanism for its funky RPC scheme. */ #define LOG2_STATUS_INTERVAL_MSEC 5 /* 1 << 5 == 32 msec */ #define STATUS_BYTECOUNT 16 /* 8 byte header + data */ static struct usb_endpoint_descriptor fs_status_desc = { .bLength = USB_DT_ENDPOINT_SIZE, .bDescriptorType = USB_DT_ENDPOINT, .bEndpointAddress = USB_DIR_IN, .bmAttributes = USB_ENDPOINT_XFER_INT, .wMaxPacketSize = __constant_cpu_to_le16 (STATUS_BYTECOUNT), .bInterval = 1 << LOG2_STATUS_INTERVAL_MSEC, }; #endif #ifdef DEV_CONFIG_CDC /* the default data interface has no endpoints ... */ static const struct usb_interface_descriptor data_nop_intf = { .bLength = sizeof data_nop_intf, .bDescriptorType = USB_DT_INTERFACE, .bInterfaceNumber = 1, .bAlternateSetting = 0, .bNumEndpoints = 0, .bInterfaceClass = USB_CLASS_CDC_DATA, .bInterfaceSubClass = 0, .bInterfaceProtocol = 0, }; /* ... but the "real" data interface has two bulk endpoints */ static const struct usb_interface_descriptor data_intf = { .bLength = sizeof data_intf, .bDescriptorType = USB_DT_INTERFACE, .bInterfaceNumber = 1, .bAlternateSetting = 1, .bNumEndpoints = 2, .bInterfaceClass = USB_CLASS_CDC_DATA, .bInterfaceSubClass = 0, .bInterfaceProtocol = 0, .iInterface = STRING_DATA, }; #endif #ifdef CONFIG_USB_ETH_RNDIS /* RNDIS doesn't activate by changing to the "real" altsetting */ static const struct usb_interface_descriptor rndis_data_intf = { .bLength = sizeof rndis_data_intf, .bDescriptorType = USB_DT_INTERFACE, .bInterfaceNumber = 1, .bAlternateSetting = 0, .bNumEndpoints = 2, .bInterfaceClass = USB_CLASS_CDC_DATA, .bInterfaceSubClass = 0, .bInterfaceProtocol = 0, .iInterface = STRING_DATA, }; #endif #ifdef DEV_CONFIG_SUBSET /* * "Simple" CDC-subset option is a simple vendor-neutral model that most * full speed controllers can handle: one interface, two bulk endpoints. * * To assist host side drivers, we fancy it up a bit, and add descriptors * so some host side drivers will understand it as a "SAFE" variant. */ static const struct usb_interface_descriptor subset_data_intf = { .bLength = sizeof subset_data_intf, .bDescriptorType = USB_DT_INTERFACE, .bInterfaceNumber = 0, .bAlternateSetting = 0, .bNumEndpoints = 2, .bInterfaceClass = USB_CLASS_COMM, .bInterfaceSubClass = USB_CDC_SUBCLASS_MDLM, .bInterfaceProtocol = 0, .iInterface = STRING_DATA, }; #endif /* SUBSET */ static struct usb_endpoint_descriptor fs_source_desc = { .bLength = USB_DT_ENDPOINT_SIZE, .bDescriptorType = USB_DT_ENDPOINT, .bEndpointAddress = USB_DIR_IN, .bmAttributes = USB_ENDPOINT_XFER_BULK, }; static struct usb_endpoint_descriptor fs_sink_desc = { .bLength = USB_DT_ENDPOINT_SIZE, .bDescriptorType = USB_DT_ENDPOINT, .bEndpointAddress = USB_DIR_OUT, .bmAttributes = USB_ENDPOINT_XFER_BULK, }; static const struct usb_descriptor_header *fs_eth_function [11] = { (struct usb_descriptor_header *) &otg_descriptor, #ifdef DEV_CONFIG_CDC /* "cdc" mode descriptors */ (struct usb_descriptor_header *) &control_intf, (struct usb_descriptor_header *) &header_desc, (struct usb_descriptor_header *) &union_desc, (struct usb_descriptor_header *) ðer_desc, /* NOTE: status endpoint may need to be removed */ (struct usb_descriptor_header *) &fs_status_desc, /* data interface, with altsetting */ (struct usb_descriptor_header *) &data_nop_intf, (struct usb_descriptor_header *) &data_intf, (struct usb_descriptor_header *) &fs_source_desc, (struct usb_descriptor_header *) &fs_sink_desc, NULL, #endif /* DEV_CONFIG_CDC */ }; static inline void __init fs_subset_descriptors(void) { #ifdef DEV_CONFIG_SUBSET /* behavior is "CDC Subset"; extra descriptors say "SAFE" */ fs_eth_function[1] = (struct usb_descriptor_header *) &subset_data_intf; fs_eth_function[2] = (struct usb_descriptor_header *) &header_desc; fs_eth_function[3] = (struct usb_descriptor_header *) &mdlm_desc; fs_eth_function[4] = (struct usb_descriptor_header *) &mdlm_detail_desc; fs_eth_function[5] = (struct usb_descriptor_header *) ðer_desc; fs_eth_function[6] = (struct usb_descriptor_header *) &fs_source_desc; fs_eth_function[7] = (struct usb_descriptor_header *) &fs_sink_desc; fs_eth_function[8] = NULL; #else fs_eth_function[1] = NULL; #endif } #ifdef CONFIG_USB_ETH_RNDIS static const struct usb_descriptor_header *fs_rndis_function [] = { (struct usb_descriptor_header *) &otg_descriptor, /* control interface matches ACM, not Ethernet */ (struct usb_descriptor_header *) &rndis_control_intf, (struct usb_descriptor_header *) &header_desc, (struct usb_descriptor_header *) &call_mgmt_descriptor, (struct usb_descriptor_header *) &acm_descriptor, (struct usb_descriptor_header *) &union_desc, (struct usb_descriptor_header *) &fs_status_desc, /* data interface has no altsetting */ (struct usb_descriptor_header *) &rndis_data_intf, (struct usb_descriptor_header *) &fs_source_desc, (struct usb_descriptor_header *) &fs_sink_desc, NULL, }; #endif #ifdef CONFIG_USB_GADGET_DUALSPEED /* * usb 2.0 devices need to expose both high speed and full speed * descriptors, unless they only run at full speed. */ #if defined(DEV_CONFIG_CDC) || defined(CONFIG_USB_ETH_RNDIS) static struct usb_endpoint_descriptor hs_status_desc = { .bLength = USB_DT_ENDPOINT_SIZE, .bDescriptorType = USB_DT_ENDPOINT, .bmAttributes = USB_ENDPOINT_XFER_INT, .wMaxPacketSize = __constant_cpu_to_le16 (STATUS_BYTECOUNT), .bInterval = LOG2_STATUS_INTERVAL_MSEC + 4, }; #endif /* DEV_CONFIG_CDC */ static struct usb_endpoint_descriptor hs_source_desc = { .bLength = USB_DT_ENDPOINT_SIZE, .bDescriptorType = USB_DT_ENDPOINT, .bmAttributes = USB_ENDPOINT_XFER_BULK, .wMaxPacketSize = __constant_cpu_to_le16 (512), }; static struct usb_endpoint_descriptor hs_sink_desc = { .bLength = USB_DT_ENDPOINT_SIZE, .bDescriptorType = USB_DT_ENDPOINT, .bmAttributes = USB_ENDPOINT_XFER_BULK, .wMaxPacketSize = __constant_cpu_to_le16 (512), }; static struct usb_qualifier_descriptor dev_qualifier = { .bLength = sizeof dev_qualifier, .bDescriptorType = USB_DT_DEVICE_QUALIFIER, .bcdUSB = __constant_cpu_to_le16 (0x0200), .bDeviceClass = USB_CLASS_COMM, .bNumConfigurations = 1, }; static const struct usb_descriptor_header *hs_eth_function [11] = { (struct usb_descriptor_header *) &otg_descriptor, #ifdef DEV_CONFIG_CDC /* "cdc" mode descriptors */ (struct usb_descriptor_header *) &control_intf, (struct usb_descriptor_header *) &header_desc, (struct usb_descriptor_header *) &union_desc, (struct usb_descriptor_header *) ðer_desc, /* NOTE: status endpoint may need to be removed */ (struct usb_descriptor_header *) &hs_status_desc, /* data interface, with altsetting */ (struct usb_descriptor_header *) &data_nop_intf, (struct usb_descriptor_header *) &data_intf, (struct usb_descriptor_header *) &hs_source_desc, (struct usb_descriptor_header *) &hs_sink_desc, NULL, #endif /* DEV_CONFIG_CDC */ }; static inline void __init hs_subset_descriptors(void) { #ifdef DEV_CONFIG_SUBSET /* behavior is "CDC Subset"; extra descriptors say "SAFE" */ hs_eth_function[1] = (struct usb_descriptor_header *) &subset_data_intf; hs_eth_function[2] = (struct usb_descriptor_header *) &header_desc; hs_eth_function[3] = (struct usb_descriptor_header *) &mdlm_desc; hs_eth_function[4] = (struct usb_descriptor_header *) &mdlm_detail_desc; hs_eth_function[5] = (struct usb_descriptor_header *) ðer_desc; hs_eth_function[6] = (struct usb_descriptor_header *) &hs_source_desc; hs_eth_function[7] = (struct usb_descriptor_header *) &hs_sink_desc; hs_eth_function[8] = NULL; #else hs_eth_function[1] = NULL; #endif } #ifdef CONFIG_USB_ETH_RNDIS static const struct usb_descriptor_header *hs_rndis_function [] = { (struct usb_descriptor_header *) &otg_descriptor, /* control interface matches ACM, not Ethernet */ (struct usb_descriptor_header *) &rndis_control_intf, (struct usb_descriptor_header *) &header_desc, (struct usb_descriptor_header *) &call_mgmt_descriptor, (struct usb_descriptor_header *) &acm_descriptor, (struct usb_descriptor_header *) &union_desc, (struct usb_descriptor_header *) &hs_status_desc, /* data interface has no altsetting */ (struct usb_descriptor_header *) &rndis_data_intf, (struct usb_descriptor_header *) &hs_source_desc, (struct usb_descriptor_header *) &hs_sink_desc, NULL, }; #endif /* maxpacket and other transfer characteristics vary by speed. */ #define ep_desc(g,hs,fs) (((g)->speed==USB_SPEED_HIGH)?(hs):(fs)) #else /* if there's no high speed support, maxpacket doesn't change. */ #define ep_desc(g,hs,fs) (((void)(g)), (fs)) static inline void __init hs_subset_descriptors(void) { } #endif /* !CONFIG_USB_GADGET_DUALSPEED */ /*-------------------------------------------------------------------------*/ /* descriptors that are built on-demand */ static char manufacturer [50]; static char product_desc [40] = DRIVER_DESC; static char serial_number [20]; /* address that the host will use ... usually assigned at random */ static char ethaddr [2 * ETH_ALEN + 1]; /* static strings, in UTF-8 */ static struct usb_string strings [] = { { STRING_MANUFACTURER, manufacturer, }, { STRING_PRODUCT, product_desc, }, { STRING_SERIALNUMBER, serial_number, }, { STRING_DATA, "Ethernet Data", }, { STRING_ETHADDR, ethaddr, }, #ifdef DEV_CONFIG_CDC { STRING_CDC, "CDC Ethernet", }, { STRING_CONTROL, "CDC Communications Control", }, #endif #ifdef DEV_CONFIG_SUBSET { STRING_SUBSET, "CDC Ethernet Subset", }, #endif #ifdef CONFIG_USB_ETH_RNDIS { STRING_RNDIS, "RNDIS", }, { STRING_RNDIS_CONTROL, "RNDIS Communications Control", }, #endif { } /* end of list */ }; static struct usb_gadget_strings stringtab = { .language = 0x0409, /* en-us */ .strings = strings, }; /* * one config, two interfaces: control, data. * complications: class descriptors, and an altsetting. */ static int config_buf (enum usb_device_speed speed, u8 *buf, u8 type, unsigned index, int is_otg) { int len; const struct usb_config_descriptor *config; const struct usb_descriptor_header **function; #ifdef CONFIG_USB_GADGET_DUALSPEED int hs = (speed == USB_SPEED_HIGH); if (type == USB_DT_OTHER_SPEED_CONFIG) hs = !hs; #define which_fn(t) (hs ? hs_ ## t ## _function : fs_ ## t ## _function) #else #define which_fn(t) (fs_ ## t ## _function) #endif if (index >= device_desc.bNumConfigurations) return -EINVAL; #ifdef CONFIG_USB_ETH_RNDIS /* list the RNDIS config first, to make Microsoft's drivers * happy. DOCSIS 1.0 needs this too. */ if (device_desc.bNumConfigurations == 2 && index == 0) { config = &rndis_config; function = which_fn (rndis); } else #endif { config = ð_config; function = which_fn (eth); } /* for now, don't advertise srp-only devices */ if (!is_otg) function++; len = usb_gadget_config_buf (config, buf, USB_BUFSIZ, function); if (len < 0) return len; ((struct usb_config_descriptor *) buf)->bDescriptorType = type; return len; } /*-------------------------------------------------------------------------*/ static void eth_start (struct eth_dev *dev, gfp_t gfp_flags); static int alloc_requests (struct eth_dev *dev, unsigned n, gfp_t gfp_flags); static int set_ether_config (struct eth_dev *dev, gfp_t gfp_flags) { int result = 0; struct usb_gadget *gadget = dev->gadget; #if defined(DEV_CONFIG_CDC) || defined(CONFIG_USB_ETH_RNDIS) /* status endpoint used for RNDIS and (optionally) CDC */ if (!subset_active(dev) && dev->status_ep) { dev->status = ep_desc (gadget, &hs_status_desc, &fs_status_desc); dev->status_ep->driver_data = dev; result = usb_ep_enable (dev->status_ep, dev->status); if (result != 0) { DEBUG (dev, "enable %s --> %d\n", dev->status_ep->name, result); goto done; } } #endif dev->in = ep_desc(gadget, &hs_source_desc, &fs_source_desc); dev->in_ep->driver_data = dev; dev->out = ep_desc(gadget, &hs_sink_desc, &fs_sink_desc); dev->out_ep->driver_data = dev; /* With CDC, the host isn't allowed to use these two data * endpoints in the default altsetting for the interface. * so we don't activate them yet. Reset from SET_INTERFACE. * * Strictly speaking RNDIS should work the same: activation is * a side effect of setting a packet filter. Deactivation is * from REMOTE_NDIS_HALT_MSG, reset from REMOTE_NDIS_RESET_MSG. */ if (!cdc_active(dev)) { result = usb_ep_enable (dev->in_ep, dev->in); if (result != 0) { DEBUG(dev, "enable %s --> %d\n", dev->in_ep->name, result); goto done; } result = usb_ep_enable (dev->out_ep, dev->out); if (result != 0) { DEBUG (dev, "enable %s --> %d\n", dev->out_ep->name, result); goto done; } } done: if (result == 0) result = alloc_requests (dev, qlen (gadget), gfp_flags); /* on error, disable any endpoints */ if (result < 0) { if (!subset_active(dev)) (void) usb_ep_disable (dev->status_ep); dev->status = NULL; (void) usb_ep_disable (dev->in_ep); (void) usb_ep_disable (dev->out_ep); dev->in = NULL; dev->out = NULL; } else /* activate non-CDC configs right away * this isn't strictly according to the RNDIS spec */ if (!cdc_active (dev)) { netif_carrier_on (dev->net); if (netif_running (dev->net)) { spin_unlock (&dev->lock); eth_start (dev, GFP_ATOMIC); spin_lock (&dev->lock); } } if (result == 0) DEBUG (dev, "qlen %d\n", qlen (gadget)); /* caller is responsible for cleanup on error */ return result; } static void eth_reset_config (struct eth_dev *dev) { struct usb_request *req; if (dev->config == 0) return; DEBUG (dev, "%s\n", __FUNCTION__); netif_stop_queue (dev->net); netif_carrier_off (dev->net); rndis_uninit(dev->rndis_config); /* disable endpoints, forcing (synchronous) completion of * pending i/o. then free the requests. */ if (dev->in) { usb_ep_disable (dev->in_ep); spin_lock(&dev->req_lock); while (likely (!list_empty (&dev->tx_reqs))) { req = container_of (dev->tx_reqs.next, struct usb_request, list); list_del (&req->list); spin_unlock(&dev->req_lock); usb_ep_free_request (dev->in_ep, req); spin_lock(&dev->req_lock); } spin_unlock(&dev->req_lock); } if (dev->out) { usb_ep_disable (dev->out_ep); spin_lock(&dev->req_lock); while (likely (!list_empty (&dev->rx_reqs))) { req = container_of (dev->rx_reqs.next, struct usb_request, list); list_del (&req->list); spin_unlock(&dev->req_lock); usb_ep_free_request (dev->out_ep, req); spin_lock(&dev->req_lock); } spin_unlock(&dev->req_lock); } if (dev->status) { usb_ep_disable (dev->status_ep); } dev->rndis = 0; dev->cdc_filter = 0; dev->config = 0; } /* change our operational config. must agree with the code * that returns config descriptors, and altsetting code. */ static int eth_set_config (struct eth_dev *dev, unsigned number, gfp_t gfp_flags) { int result = 0; struct usb_gadget *gadget = dev->gadget; if (gadget_is_sa1100 (gadget) && dev->config && atomic_read (&dev->tx_qlen) != 0) { /* tx fifo is full, but we can't clear it...*/ INFO (dev, "can't change configurations\n"); return -ESPIPE; } eth_reset_config (dev); switch (number) { case DEV_CONFIG_VALUE: result = set_ether_config (dev, gfp_flags); break; #ifdef CONFIG_USB_ETH_RNDIS case DEV_RNDIS_CONFIG_VALUE: dev->rndis = 1; result = set_ether_config (dev, gfp_flags); break; #endif default: result = -EINVAL; /* FALL THROUGH */ case 0: break; } if (result) { if (number) eth_reset_config (dev); usb_gadget_vbus_draw(dev->gadget, dev->gadget->is_otg ? 8 : 100); } else { char *speed; unsigned power; power = 2 * eth_config.bMaxPower; usb_gadget_vbus_draw(dev->gadget, power); switch (gadget->speed) { case USB_SPEED_FULL: speed = "full"; break; #ifdef CONFIG_USB_GADGET_DUALSPEED case USB_SPEED_HIGH: speed = "high"; break; #endif default: speed = "?"; break; } dev->config = number; INFO (dev, "%s speed config #%d: %d mA, %s, using %s\n", speed, number, power, driver_desc, rndis_active(dev) ? "RNDIS" : (cdc_active(dev) ? "CDC Ethernet" : "CDC Ethernet Subset")); } return result; } /*-------------------------------------------------------------------------*/ #ifdef DEV_CONFIG_CDC /* The interrupt endpoint is used in CDC networking models (Ethernet, ATM) * only to notify the host about link status changes (which we support) or * report completion of some encapsulated command (as used in RNDIS). Since * we want this CDC Ethernet code to be vendor-neutral, we don't use that * command mechanism; and only one status request is ever queued. */ static void eth_status_complete (struct usb_ep *ep, struct usb_request *req) { struct usb_cdc_notification *event = req->buf; int value = req->status; struct eth_dev *dev = ep->driver_data; /* issue the second notification if host reads the first */ if (event->bNotificationType == USB_CDC_NOTIFY_NETWORK_CONNECTION && value == 0) { __le32 *data = req->buf + sizeof *event; event->bmRequestType = 0xA1; event->bNotificationType = USB_CDC_NOTIFY_SPEED_CHANGE; event->wValue = __constant_cpu_to_le16 (0); event->wIndex = __constant_cpu_to_le16 (1); event->wLength = __constant_cpu_to_le16 (8); /* SPEED_CHANGE data is up/down speeds in bits/sec */ data [0] = data [1] = cpu_to_le32 (BITRATE (dev->gadget)); req->length = STATUS_BYTECOUNT; value = usb_ep_queue (ep, req, GFP_ATOMIC); DEBUG (dev, "send SPEED_CHANGE --> %d\n", value); if (value == 0) return; } else if (value != -ECONNRESET) DEBUG (dev, "event %02x --> %d\n", event->bNotificationType, value); req->context = NULL; } static void issue_start_status (struct eth_dev *dev) { struct usb_request *req = dev->stat_req; struct usb_cdc_notification *event; int value; DEBUG (dev, "%s, flush old status first\n", __FUNCTION__); /* flush old status * * FIXME ugly idiom, maybe we'd be better with just * a "cancel the whole queue" primitive since any * unlink-one primitive has way too many error modes. * here, we "know" toggle is already clear... * * FIXME iff req->context != null just dequeue it */ usb_ep_disable (dev->status_ep); usb_ep_enable (dev->status_ep, dev->status); /* 3.8.1 says to issue first NETWORK_CONNECTION, then * a SPEED_CHANGE. could be useful in some configs. */ event = req->buf; event->bmRequestType = 0xA1; event->bNotificationType = USB_CDC_NOTIFY_NETWORK_CONNECTION; event->wValue = __constant_cpu_to_le16 (1); /* connected */ event->wIndex = __constant_cpu_to_le16 (1); event->wLength = 0; req->length = sizeof *event; req->complete = eth_status_complete; req->context = dev; value = usb_ep_queue (dev->status_ep, req, GFP_ATOMIC); if (value < 0) DEBUG (dev, "status buf queue --> %d\n", value); } #endif /*-------------------------------------------------------------------------*/ static void eth_setup_complete (struct usb_ep *ep, struct usb_request *req) { if (req->status || req->actual != req->length) DEBUG ((struct eth_dev *) ep->driver_data, "setup complete --> %d, %d/%d\n", req->status, req->actual, req->length); } #ifdef CONFIG_USB_ETH_RNDIS static void rndis_response_complete (struct usb_ep *ep, struct usb_request *req) { if (req->status || req->actual != req->length) DEBUG ((struct eth_dev *) ep->driver_data, "rndis response complete --> %d, %d/%d\n", req->status, req->actual, req->length); /* done sending after USB_CDC_GET_ENCAPSULATED_RESPONSE */ } static void rndis_command_complete (struct usb_ep *ep, struct usb_request *req) { struct eth_dev *dev = ep->driver_data; int status; /* received RNDIS command from USB_CDC_SEND_ENCAPSULATED_COMMAND */ spin_lock(&dev->lock); status = rndis_msg_parser (dev->rndis_config, (u8 *) req->buf); if (status < 0) ERROR(dev, "%s: rndis parse error %d\n", __FUNCTION__, status); spin_unlock(&dev->lock); } #endif /* RNDIS */ /* * The setup() callback implements all the ep0 functionality that's not * handled lower down. CDC has a number of less-common features: * * - two interfaces: control, and ethernet data * - Ethernet data interface has two altsettings: default, and active * - class-specific descriptors for the control interface * - class-specific control requests */ static int eth_setup (struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl) { struct eth_dev *dev = get_gadget_data (gadget); struct usb_request *req = dev->req; int value = -EOPNOTSUPP; u16 wIndex = le16_to_cpu(ctrl->wIndex); u16 wValue = le16_to_cpu(ctrl->wValue); u16 wLength = le16_to_cpu(ctrl->wLength); /* descriptors just go into the pre-allocated ep0 buffer, * while config change events may enable network traffic. */ req->complete = eth_setup_complete; switch (ctrl->bRequest) { case USB_REQ_GET_DESCRIPTOR: if (ctrl->bRequestType != USB_DIR_IN) break; switch (wValue >> 8) { case USB_DT_DEVICE: value = min (wLength, (u16) sizeof device_desc); memcpy (req->buf, &device_desc, value); break; #ifdef CONFIG_USB_GADGET_DUALSPEED case USB_DT_DEVICE_QUALIFIER: if (!gadget->is_dualspeed) break; value = min (wLength, (u16) sizeof dev_qualifier); memcpy (req->buf, &dev_qualifier, value); break; case USB_DT_OTHER_SPEED_CONFIG: if (!gadget->is_dualspeed) break; // FALLTHROUGH #endif /* CONFIG_USB_GADGET_DUALSPEED */ case USB_DT_CONFIG: value = config_buf (gadget->speed, req->buf, wValue >> 8, wValue & 0xff, gadget->is_otg); if (value >= 0) value = min (wLength, (u16) value); break; case USB_DT_STRING: value = usb_gadget_get_string (&stringtab, wValue & 0xff, req->buf); if (value >= 0) value = min (wLength, (u16) value); break; } break; case USB_REQ_SET_CONFIGURATION: if (ctrl->bRequestType != 0) break; if (gadget->a_hnp_support) DEBUG (dev, "HNP available\n"); else if (gadget->a_alt_hnp_support) DEBUG (dev, "HNP needs a different root port\n"); spin_lock (&dev->lock); value = eth_set_config (dev, wValue, GFP_ATOMIC); spin_unlock (&dev->lock); break; case USB_REQ_GET_CONFIGURATION: if (ctrl->bRequestType != USB_DIR_IN) break; *(u8 *)req->buf = dev->config; value = min (wLength, (u16) 1); break; case USB_REQ_SET_INTERFACE: if (ctrl->bRequestType != USB_RECIP_INTERFACE || !dev->config || wIndex > 1) break; if (!cdc_active(dev) && wIndex != 0) break; spin_lock (&dev->lock); /* PXA hardware partially handles SET_INTERFACE; * we need to kluge around that interference. */ if (gadget_is_pxa (gadget)) { value = eth_set_config (dev, DEV_CONFIG_VALUE, GFP_ATOMIC); goto done_set_intf; } #ifdef DEV_CONFIG_CDC switch (wIndex) { case 0: /* control/master intf */ if (wValue != 0) break; if (dev->status) { usb_ep_disable (dev->status_ep); usb_ep_enable (dev->status_ep, dev->status); } value = 0; break; case 1: /* data intf */ if (wValue > 1) break; usb_ep_disable (dev->in_ep); usb_ep_disable (dev->out_ep); /* CDC requires the data transfers not be done from * the default interface setting ... also, setting * the non-default interface resets filters etc. */ if (wValue == 1) { if (!cdc_active (dev)) break; usb_ep_enable (dev->in_ep, dev->in); usb_ep_enable (dev->out_ep, dev->out); dev->cdc_filter = DEFAULT_FILTER; netif_carrier_on (dev->net); if (dev->status) issue_start_status (dev); if (netif_running (dev->net)) { spin_unlock (&dev->lock); eth_start (dev, GFP_ATOMIC); spin_lock (&dev->lock); } } else { netif_stop_queue (dev->net); netif_carrier_off (dev->net); } value = 0; break; } #else /* FIXME this is wrong, as is the assumption that * all non-PXA hardware talks real CDC ... */ dev_warn (&gadget->dev, "set_interface ignored!\n"); #endif /* DEV_CONFIG_CDC */ done_set_intf: spin_unlock (&dev->lock); break; case USB_REQ_GET_INTERFACE: if (ctrl->bRequestType != (USB_DIR_IN|USB_RECIP_INTERFACE) || !dev->config || wIndex > 1) break; if (!(cdc_active(dev) || rndis_active(dev)) && wIndex != 0) break; /* for CDC, iff carrier is on, data interface is active. */ if (rndis_active(dev) || wIndex != 1) *(u8 *)req->buf = 0; else *(u8 *)req->buf = netif_carrier_ok (dev->net) ? 1 : 0; value = min (wLength, (u16) 1); break; #ifdef DEV_CONFIG_CDC case USB_CDC_SET_ETHERNET_PACKET_FILTER: /* see 6.2.30: no data, wIndex = interface, * wValue = packet filter bitmap */ if (ctrl->bRequestType != (USB_TYPE_CLASS|USB_RECIP_INTERFACE) || !cdc_active(dev) || wLength != 0 || wIndex > 1) break; DEBUG (dev, "packet filter %02x\n", wValue); dev->cdc_filter = wValue; value = 0; break; /* and potentially: * case USB_CDC_SET_ETHERNET_MULTICAST_FILTERS: * case USB_CDC_SET_ETHERNET_PM_PATTERN_FILTER: * case USB_CDC_GET_ETHERNET_PM_PATTERN_FILTER: * case USB_CDC_GET_ETHERNET_STATISTIC: */ #endif /* DEV_CONFIG_CDC */ #ifdef CONFIG_USB_ETH_RNDIS /* RNDIS uses the CDC command encapsulation mechanism to implement * an RPC scheme, with much getting/setting of attributes by OID. */ case USB_CDC_SEND_ENCAPSULATED_COMMAND: if (ctrl->bRequestType != (USB_TYPE_CLASS|USB_RECIP_INTERFACE) || !rndis_active(dev) || wLength > USB_BUFSIZ || wValue || rndis_control_intf.bInterfaceNumber != wIndex) break; /* read the request, then process it */ value = wLength; req->complete = rndis_command_complete; /* later, rndis_control_ack () sends a notification */ break; case USB_CDC_GET_ENCAPSULATED_RESPONSE: if ((USB_DIR_IN|USB_TYPE_CLASS|USB_RECIP_INTERFACE) == ctrl->bRequestType && rndis_active(dev) // && wLength >= 0x0400 && !wValue && rndis_control_intf.bInterfaceNumber == wIndex) { u8 *buf; /* return the result */ buf = rndis_get_next_response (dev->rndis_config, &value); if (buf) { memcpy (req->buf, buf, value); req->complete = rndis_response_complete; rndis_free_response(dev->rndis_config, buf); } /* else stalls ... spec says to avoid that */ } break; #endif /* RNDIS */ default: VDEBUG (dev, "unknown control req%02x.%02x v%04x i%04x l%d\n", ctrl->bRequestType, ctrl->bRequest, wValue, wIndex, wLength); } /* respond with data transfer before status phase? */ if (value >= 0) { req->length = value; req->zero = value < wLength && (value % gadget->ep0->maxpacket) == 0; value = usb_ep_queue (gadget->ep0, req, GFP_ATOMIC); if (value < 0) { DEBUG (dev, "ep_queue --> %d\n", value); req->status = 0; eth_setup_complete (gadget->ep0, req); } } /* host either stalls (value < 0) or reports success */ return value; } static void eth_disconnect (struct usb_gadget *gadget) { struct eth_dev *dev = get_gadget_data (gadget); unsigned long flags; spin_lock_irqsave (&dev->lock, flags); netif_stop_queue (dev->net); netif_carrier_off (dev->net); eth_reset_config (dev); spin_unlock_irqrestore (&dev->lock, flags); /* FIXME RNDIS should enter RNDIS_UNINITIALIZED */ /* next we may get setup() calls to enumerate new connections; * or an unbind() during shutdown (including removing module). */ } /*-------------------------------------------------------------------------*/ /* NETWORK DRIVER HOOKUP (to the layer above this driver) */ static int eth_change_mtu (struct net_device *net, int new_mtu) { struct eth_dev *dev = netdev_priv(net); if (dev->rndis) return -EBUSY; if (new_mtu <= ETH_HLEN || new_mtu > ETH_FRAME_LEN) return -ERANGE; /* no zero-length packet read wanted after mtu-sized packets */ if (((new_mtu + sizeof (struct ethhdr)) % dev->in_ep->maxpacket) == 0) return -EDOM; net->mtu = new_mtu; return 0; } static struct net_device_stats *eth_get_stats (struct net_device *net) { return &((struct eth_dev *)netdev_priv(net))->stats; } static void eth_get_drvinfo(struct net_device *net, struct ethtool_drvinfo *p) { struct eth_dev *dev = netdev_priv(net); strlcpy(p->driver, shortname, sizeof p->driver); strlcpy(p->version, DRIVER_VERSION, sizeof p->version); strlcpy(p->fw_version, dev->gadget->name, sizeof p->fw_version); strlcpy (p->bus_info, dev->gadget->dev.bus_id, sizeof p->bus_info); } static u32 eth_get_link(struct net_device *net) { struct eth_dev *dev = netdev_priv(net); return dev->gadget->speed != USB_SPEED_UNKNOWN; } static struct ethtool_ops ops = { .get_drvinfo = eth_get_drvinfo, .get_link = eth_get_link }; static void defer_kevent (struct eth_dev *dev, int flag) { if (test_and_set_bit (flag, &dev->todo)) return; if (!schedule_work (&dev->work)) ERROR (dev, "kevent %d may have been dropped\n", flag); else DEBUG (dev, "kevent %d scheduled\n", flag); } static void rx_complete (struct usb_ep *ep, struct usb_request *req); static int rx_submit (struct eth_dev *dev, struct usb_request *req, gfp_t gfp_flags) { struct sk_buff *skb; int retval = -ENOMEM; size_t size; /* Padding up to RX_EXTRA handles minor disagreements with host. * Normally we use the USB "terminate on short read" convention; * so allow up to (N*maxpacket), since that memory is normally * already allocated. Some hardware doesn't deal well with short * reads (e.g. DMA must be N*maxpacket), so for now don't trim a * byte off the end (to force hardware errors on overflow). * * RNDIS uses internal framing, and explicitly allows senders to * pad to end-of-packet. That's potentially nice for speed, * but means receivers can't recover synch on their own. */ size = (sizeof (struct ethhdr) + dev->net->mtu + RX_EXTRA); size += dev->out_ep->maxpacket - 1; if (rndis_active(dev)) size += sizeof (struct rndis_packet_msg_type); size -= size % dev->out_ep->maxpacket; if ((skb = alloc_skb (size + NET_IP_ALIGN, gfp_flags)) == 0) { DEBUG (dev, "no rx skb\n"); goto enomem; } /* Some platforms perform better when IP packets are aligned, * but on at least one, checksumming fails otherwise. Note: * RNDIS headers involve variable numbers of LE32 values. */ skb_reserve(skb, NET_IP_ALIGN); req->buf = skb->data; req->length = size; req->complete = rx_complete; req->context = skb; retval = usb_ep_queue (dev->out_ep, req, gfp_flags); if (retval == -ENOMEM) enomem: defer_kevent (dev, WORK_RX_MEMORY); if (retval) { DEBUG (dev, "rx submit --> %d\n", retval); dev_kfree_skb_any (skb); spin_lock(&dev->req_lock); list_add (&req->list, &dev->rx_reqs); spin_unlock(&dev->req_lock); } return retval; } static void rx_complete (struct usb_ep *ep, struct usb_request *req) { struct sk_buff *skb = req->context; struct eth_dev *dev = ep->driver_data; int status = req->status; switch (status) { /* normal completion */ case 0: skb_put (skb, req->actual); /* we know MaxPacketsPerTransfer == 1 here */ if (rndis_active(dev)) status = rndis_rm_hdr (skb); if (status < 0 || ETH_HLEN > skb->len || skb->len > ETH_FRAME_LEN) { dev->stats.rx_errors++; dev->stats.rx_length_errors++; DEBUG (dev, "rx length %d\n", skb->len); break; } skb->dev = dev->net; skb->protocol = eth_type_trans (skb, dev->net); dev->stats.rx_packets++; dev->stats.rx_bytes += skb->len; /* no buffer copies needed, unless hardware can't * use skb buffers. */ status = netif_rx (skb); skb = NULL; break; /* software-driven interface shutdown */ case -ECONNRESET: // unlink case -ESHUTDOWN: // disconnect etc VDEBUG (dev, "rx shutdown, code %d\n", status); goto quiesce; /* for hardware automagic (such as pxa) */ case -ECONNABORTED: // endpoint reset DEBUG (dev, "rx %s reset\n", ep->name); defer_kevent (dev, WORK_RX_MEMORY); quiesce: dev_kfree_skb_any (skb); goto clean; /* data overrun */ case -EOVERFLOW: dev->stats.rx_over_errors++; // FALLTHROUGH default: dev->stats.rx_errors++; DEBUG (dev, "rx status %d\n", status); break; } if (skb) dev_kfree_skb_any (skb); if (!netif_running (dev->net)) { clean: spin_lock(&dev->req_lock); list_add (&req->list, &dev->rx_reqs); spin_unlock(&dev->req_lock); req = NULL; } if (req) rx_submit (dev, req, GFP_ATOMIC); } static int prealloc (struct list_head *list, struct usb_ep *ep, unsigned n, gfp_t gfp_flags) { unsigned i; struct usb_request *req; if (!n) return -ENOMEM; /* queue/recycle up to N requests */ i = n; list_for_each_entry (req, list, list) { if (i-- == 0) goto extra; } while (i--) { req = usb_ep_alloc_request (ep, gfp_flags); if (!req) return list_empty (list) ? -ENOMEM : 0; list_add (&req->list, list); } return 0; extra: /* free extras */ for (;;) { struct list_head *next; next = req->list.next; list_del (&req->list); usb_ep_free_request (ep, req); if (next == list) break; req = container_of (next, struct usb_request, list); } return 0; } static int alloc_requests (struct eth_dev *dev, unsigned n, gfp_t gfp_flags) { int status; spin_lock(&dev->req_lock); status = prealloc (&dev->tx_reqs, dev->in_ep, n, gfp_flags); if (status < 0) goto fail; status = prealloc (&dev->rx_reqs, dev->out_ep, n, gfp_flags); if (status < 0) goto fail; goto done; fail: DEBUG (dev, "can't alloc requests\n"); done: spin_unlock(&dev->req_lock); return status; } static void rx_fill (struct eth_dev *dev, gfp_t gfp_flags) { struct usb_request *req; unsigned long flags; /* fill unused rxq slots with some skb */ spin_lock_irqsave(&dev->req_lock, flags); while (!list_empty (&dev->rx_reqs)) { req = container_of (dev->rx_reqs.next, struct usb_request, list); list_del_init (&req->list); spin_unlock_irqrestore(&dev->req_lock, flags); if (rx_submit (dev, req, gfp_flags) < 0) { defer_kevent (dev, WORK_RX_MEMORY); return; } spin_lock_irqsave(&dev->req_lock, flags); } spin_unlock_irqrestore(&dev->req_lock, flags); } static void eth_work (struct work_struct *work) { struct eth_dev *dev = container_of(work, struct eth_dev, work); if (test_and_clear_bit (WORK_RX_MEMORY, &dev->todo)) { if (netif_running (dev->net)) rx_fill (dev, GFP_KERNEL); } if (dev->todo) DEBUG (dev, "work done, flags = 0x%lx\n", dev->todo); } static void tx_complete (struct usb_ep *ep, struct usb_request *req) { struct sk_buff *skb = req->context; struct eth_dev *dev = ep->driver_data; switch (req->status) { default: dev->stats.tx_errors++; VDEBUG (dev, "tx err %d\n", req->status); /* FALLTHROUGH */ case -ECONNRESET: // unlink case -ESHUTDOWN: // disconnect etc break; case 0: dev->stats.tx_bytes += skb->len; } dev->stats.tx_packets++; spin_lock(&dev->req_lock); list_add (&req->list, &dev->tx_reqs); spin_unlock(&dev->req_lock); dev_kfree_skb_any (skb); atomic_dec (&dev->tx_qlen); if (netif_carrier_ok (dev->net)) netif_wake_queue (dev->net); } static inline int eth_is_promisc (struct eth_dev *dev) { /* no filters for the CDC subset; always promisc */ if (subset_active (dev)) return 1; return dev->cdc_filter & USB_CDC_PACKET_TYPE_PROMISCUOUS; } static int eth_start_xmit (struct sk_buff *skb, struct net_device *net) { struct eth_dev *dev = netdev_priv(net); int length = skb->len; int retval; struct usb_request *req = NULL; unsigned long flags; /* apply outgoing CDC or RNDIS filters */ if (!eth_is_promisc (dev)) { u8 *dest = skb->data; if (is_multicast_ether_addr(dest)) { u16 type; /* ignores USB_CDC_PACKET_TYPE_MULTICAST and host * SET_ETHERNET_MULTICAST_FILTERS requests */ if (is_broadcast_ether_addr(dest)) type = USB_CDC_PACKET_TYPE_BROADCAST; else type = USB_CDC_PACKET_TYPE_ALL_MULTICAST; if (!(dev->cdc_filter & type)) { dev_kfree_skb_any (skb); return 0; } } /* ignores USB_CDC_PACKET_TYPE_DIRECTED */ } spin_lock_irqsave(&dev->req_lock, flags); req = container_of (dev->tx_reqs.next, struct usb_request, list); list_del (&req->list); if (list_empty (&dev->tx_reqs)) netif_stop_queue (net); spin_unlock_irqrestore(&dev->req_lock, flags); /* no buffer copies needed, unless the network stack did it * or the hardware can't use skb buffers. * or there's not enough space for any RNDIS headers we need */ if (rndis_active(dev)) { struct sk_buff *skb_rndis; skb_rndis = skb_realloc_headroom (skb, sizeof (struct rndis_packet_msg_type)); if (!skb_rndis) goto drop; dev_kfree_skb_any (skb); skb = skb_rndis; rndis_add_hdr (skb); length = skb->len; } req->buf = skb->data; req->context = skb; req->complete = tx_complete; /* use zlp framing on tx for strict CDC-Ether conformance, * though any robust network rx path ignores extra padding. * and some hardware doesn't like to write zlps. */ req->zero = 1; if (!dev->zlp && (length % dev->in_ep->maxpacket) == 0) length++; req->length = length; #ifdef CONFIG_USB_GADGET_DUALSPEED /* throttle highspeed IRQ rate back slightly */ req->no_interrupt = (dev->gadget->speed == USB_SPEED_HIGH) ? ((atomic_read (&dev->tx_qlen) % TX_DELAY) != 0) : 0; #endif retval = usb_ep_queue (dev->in_ep, req, GFP_ATOMIC); switch (retval) { default: DEBUG (dev, "tx queue err %d\n", retval); break; case 0: net->trans_start = jiffies; atomic_inc (&dev->tx_qlen); } if (retval) { drop: dev->stats.tx_dropped++; dev_kfree_skb_any (skb); spin_lock_irqsave(&dev->req_lock, flags); if (list_empty (&dev->tx_reqs)) netif_start_queue (net); list_add (&req->list, &dev->tx_reqs); spin_unlock_irqrestore(&dev->req_lock, flags); } return 0; } /*-------------------------------------------------------------------------*/ #ifdef CONFIG_USB_ETH_RNDIS /* The interrupt endpoint is used in RNDIS to notify the host when messages * other than data packets are available ... notably the REMOTE_NDIS_*_CMPLT * messages, but also REMOTE_NDIS_INDICATE_STATUS_MSG and potentially even * REMOTE_NDIS_KEEPALIVE_MSG. * * The RNDIS control queue is processed by GET_ENCAPSULATED_RESPONSE, and * normally just one notification will be queued. */ static struct usb_request *eth_req_alloc (struct usb_ep *, unsigned, gfp_t); static void eth_req_free (struct usb_ep *ep, struct usb_request *req); static void rndis_control_ack_complete (struct usb_ep *ep, struct usb_request *req) { struct eth_dev *dev = ep->driver_data; if (req->status || req->actual != req->length) DEBUG (dev, "rndis control ack complete --> %d, %d/%d\n", req->status, req->actual, req->length); req->context = NULL; if (req != dev->stat_req) eth_req_free(ep, req); } static int rndis_control_ack (struct net_device *net) { struct eth_dev *dev = netdev_priv(net); int length; struct usb_request *resp = dev->stat_req; /* in case RNDIS calls this after disconnect */ if (!dev->status) { DEBUG (dev, "status ENODEV\n"); return -ENODEV; } /* in case queue length > 1 */ if (resp->context) { resp = eth_req_alloc (dev->status_ep, 8, GFP_ATOMIC); if (!resp) return -ENOMEM; } /* Send RNDIS RESPONSE_AVAILABLE notification; * USB_CDC_NOTIFY_RESPONSE_AVAILABLE should work too */ resp->length = 8; resp->complete = rndis_control_ack_complete; resp->context = dev; *((__le32 *) resp->buf) = __constant_cpu_to_le32 (1); *((__le32 *) resp->buf + 1) = __constant_cpu_to_le32 (0); length = usb_ep_queue (dev->status_ep, resp, GFP_ATOMIC); if (length < 0) { resp->status = 0; rndis_control_ack_complete (dev->status_ep, resp); } return 0; } #else #define rndis_control_ack NULL #endif /* RNDIS */ static void eth_start (struct eth_dev *dev, gfp_t gfp_flags) { DEBUG (dev, "%s\n", __FUNCTION__); /* fill the rx queue */ rx_fill (dev, gfp_flags); /* and open the tx floodgates */ atomic_set (&dev->tx_qlen, 0); netif_wake_queue (dev->net); if (rndis_active(dev)) { rndis_set_param_medium (dev->rndis_config, NDIS_MEDIUM_802_3, BITRATE(dev->gadget)/100); (void) rndis_signal_connect (dev->rndis_config); } } static int eth_open (struct net_device *net) { struct eth_dev *dev = netdev_priv(net); DEBUG (dev, "%s\n", __FUNCTION__); if (netif_carrier_ok (dev->net)) eth_start (dev, GFP_KERNEL); return 0; } static int eth_stop (struct net_device *net) { struct eth_dev *dev = netdev_priv(net); VDEBUG (dev, "%s\n", __FUNCTION__); netif_stop_queue (net); DEBUG (dev, "stop stats: rx/tx %ld/%ld, errs %ld/%ld\n", dev->stats.rx_packets, dev->stats.tx_packets, dev->stats.rx_errors, dev->stats.tx_errors ); /* ensure there are no more active requests */ if (dev->config) { usb_ep_disable (dev->in_ep); usb_ep_disable (dev->out_ep); if (netif_carrier_ok (dev->net)) { DEBUG (dev, "host still using in/out endpoints\n"); // FIXME idiom may leave toggle wrong here usb_ep_enable (dev->in_ep, dev->in); usb_ep_enable (dev->out_ep, dev->out); } if (dev->status_ep) { usb_ep_disable (dev->status_ep); usb_ep_enable (dev->status_ep, dev->status); } } if (rndis_active(dev)) { rndis_set_param_medium (dev->rndis_config, NDIS_MEDIUM_802_3, 0); (void) rndis_signal_disconnect (dev->rndis_config); } return 0; } /*-------------------------------------------------------------------------*/ static struct usb_request * eth_req_alloc (struct usb_ep *ep, unsigned size, gfp_t gfp_flags) { struct usb_request *req; req = usb_ep_alloc_request (ep, gfp_flags); if (!req) return NULL; req->buf = kmalloc (size, gfp_flags); if (!req->buf) { usb_ep_free_request (ep, req); req = NULL; } return req; } static void eth_req_free (struct usb_ep *ep, struct usb_request *req) { kfree (req->buf); usb_ep_free_request (ep, req); } static void /* __init_or_exit */ eth_unbind (struct usb_gadget *gadget) { struct eth_dev *dev = get_gadget_data (gadget); DEBUG (dev, "unbind\n"); rndis_deregister (dev->rndis_config); rndis_exit (); /* we've already been disconnected ... no i/o is active */ if (dev->req) { eth_req_free (gadget->ep0, dev->req); dev->req = NULL; } if (dev->stat_req) { eth_req_free (dev->status_ep, dev->stat_req); dev->stat_req = NULL; } unregister_netdev (dev->net); free_netdev(dev->net); /* assuming we used keventd, it must quiesce too */ flush_scheduled_work (); set_gadget_data (gadget, NULL); } static u8 __devinit nibble (unsigned char c) { if (likely (isdigit (c))) return c - '0'; c = toupper (c); if (likely (isxdigit (c))) return 10 + c - 'A'; return 0; } static int __devinit get_ether_addr(const char *str, u8 *dev_addr) { if (str) { unsigned i; for (i = 0; i < 6; i++) { unsigned char num; if((*str == '.') || (*str == ':')) str++; num = nibble(*str++) << 4; num |= (nibble(*str++)); dev_addr [i] = num; } if (is_valid_ether_addr (dev_addr)) return 0; } random_ether_addr(dev_addr); return 1; } static int __devinit eth_bind (struct usb_gadget *gadget) { struct eth_dev *dev; struct net_device *net; u8 cdc = 1, zlp = 1, rndis = 1; struct usb_ep *in_ep, *out_ep, *status_ep = NULL; int status = -ENOMEM; int gcnum; /* these flags are only ever cleared; compiler take note */ #ifndef DEV_CONFIG_CDC cdc = 0; #endif #ifndef CONFIG_USB_ETH_RNDIS rndis = 0; #endif /* Because most host side USB stacks handle CDC Ethernet, that * standard protocol is _strongly_ preferred for interop purposes. * (By everyone except Microsoft.) */ if (gadget_is_pxa (gadget)) { /* pxa doesn't support altsettings */ cdc = 0; } else if (gadget_is_musbhdrc(gadget)) { /* reduce tx dma overhead by avoiding special cases */ zlp = 0; } else if (gadget_is_sh(gadget)) { /* sh doesn't support multiple interfaces or configs */ cdc = 0; rndis = 0; } else if (gadget_is_sa1100 (gadget)) { /* hardware can't write zlps */ zlp = 0; /* sa1100 CAN do CDC, without status endpoint ... we use * non-CDC to be compatible with ARM Linux-2.4 "usb-eth". */ cdc = 0; } gcnum = usb_gadget_controller_number (gadget); if (gcnum >= 0) device_desc.bcdDevice = cpu_to_le16 (0x0200 + gcnum); else { /* can't assume CDC works. don't want to default to * anything less functional on CDC-capable hardware, * so we fail in this case. */ dev_err (&gadget->dev, "controller '%s' not recognized\n", gadget->name); return -ENODEV; } snprintf (manufacturer, sizeof manufacturer, "%s %s/%s", init_utsname()->sysname, init_utsname()->release, gadget->name); /* If there's an RNDIS configuration, that's what Windows wants to * be using ... so use these product IDs here and in the "linux.inf" * needed to install MSFT drivers. Current Linux kernels will use * the second configuration if it's CDC Ethernet, and need some help * to choose the right configuration otherwise. */ if (rndis) { device_desc.idVendor = __constant_cpu_to_le16(RNDIS_VENDOR_NUM); device_desc.idProduct = __constant_cpu_to_le16(RNDIS_PRODUCT_NUM); snprintf (product_desc, sizeof product_desc, "RNDIS/%s", driver_desc); /* CDC subset ... recognized by Linux since 2.4.10, but Windows * drivers aren't widely available. (That may be improved by * supporting one submode of the "SAFE" variant of MDLM.) */ } else if (!cdc) { device_desc.idVendor = __constant_cpu_to_le16(SIMPLE_VENDOR_NUM); device_desc.idProduct = __constant_cpu_to_le16(SIMPLE_PRODUCT_NUM); } /* support optional vendor/distro customization */ if (idVendor) { if (!idProduct) { dev_err (&gadget->dev, "idVendor needs idProduct!\n"); return -ENODEV; } device_desc.idVendor = cpu_to_le16(idVendor); device_desc.idProduct = cpu_to_le16(idProduct); if (bcdDevice) device_desc.bcdDevice = cpu_to_le16(bcdDevice); } if (iManufacturer) strlcpy (manufacturer, iManufacturer, sizeof manufacturer); if (iProduct) strlcpy (product_desc, iProduct, sizeof product_desc); if (iSerialNumber) { device_desc.iSerialNumber = STRING_SERIALNUMBER, strlcpy(serial_number, iSerialNumber, sizeof serial_number); } /* all we really need is bulk IN/OUT */ usb_ep_autoconfig_reset (gadget); in_ep = usb_ep_autoconfig (gadget, &fs_source_desc); if (!in_ep) { autoconf_fail: dev_err (&gadget->dev, "can't autoconfigure on %s\n", gadget->name); return -ENODEV; } in_ep->driver_data = in_ep; /* claim */ out_ep = usb_ep_autoconfig (gadget, &fs_sink_desc); if (!out_ep) goto autoconf_fail; out_ep->driver_data = out_ep; /* claim */ #if defined(DEV_CONFIG_CDC) || defined(CONFIG_USB_ETH_RNDIS) /* CDC Ethernet control interface doesn't require a status endpoint. * Since some hosts expect one, try to allocate one anyway. */ if (cdc || rndis) { status_ep = usb_ep_autoconfig (gadget, &fs_status_desc); if (status_ep) { status_ep->driver_data = status_ep; /* claim */ } else if (rndis) { dev_err (&gadget->dev, "can't run RNDIS on %s\n", gadget->name); return -ENODEV; #ifdef DEV_CONFIG_CDC /* pxa25x only does CDC subset; often used with RNDIS */ } else if (cdc) { control_intf.bNumEndpoints = 0; /* FIXME remove endpoint from descriptor list */ #endif } } #endif /* one config: cdc, else minimal subset */ if (!cdc) { eth_config.bNumInterfaces = 1; eth_config.iConfiguration = STRING_SUBSET; /* use functions to set these up, in case we're built to work * with multiple controllers and must override CDC Ethernet. */ fs_subset_descriptors(); hs_subset_descriptors(); } device_desc.bMaxPacketSize0 = gadget->ep0->maxpacket; usb_gadget_set_selfpowered (gadget); /* For now RNDIS is always a second config */ if (rndis) device_desc.bNumConfigurations = 2; #ifdef CONFIG_USB_GADGET_DUALSPEED if (rndis) dev_qualifier.bNumConfigurations = 2; else if (!cdc) dev_qualifier.bDeviceClass = USB_CLASS_VENDOR_SPEC; /* assumes ep0 uses the same value for both speeds ... */ dev_qualifier.bMaxPacketSize0 = device_desc.bMaxPacketSize0; /* and that all endpoints are dual-speed */ hs_source_desc.bEndpointAddress = fs_source_desc.bEndpointAddress; hs_sink_desc.bEndpointAddress = fs_sink_desc.bEndpointAddress; #if defined(DEV_CONFIG_CDC) || defined(CONFIG_USB_ETH_RNDIS) if (status_ep) hs_status_desc.bEndpointAddress = fs_status_desc.bEndpointAddress; #endif #endif /* DUALSPEED */ if (gadget->is_otg) { otg_descriptor.bmAttributes |= USB_OTG_HNP, eth_config.bmAttributes |= USB_CONFIG_ATT_WAKEUP; eth_config.bMaxPower = 4; #ifdef CONFIG_USB_ETH_RNDIS rndis_config.bmAttributes |= USB_CONFIG_ATT_WAKEUP; rndis_config.bMaxPower = 4; #endif } net = alloc_etherdev (sizeof *dev); if (!net) return status; dev = netdev_priv(net); spin_lock_init (&dev->lock); spin_lock_init (&dev->req_lock); INIT_WORK (&dev->work, eth_work); INIT_LIST_HEAD (&dev->tx_reqs); INIT_LIST_HEAD (&dev->rx_reqs); /* network device setup */ dev->net = net; SET_MODULE_OWNER (net); strcpy (net->name, "usb%d"); dev->cdc = cdc; dev->zlp = zlp; dev->in_ep = in_ep; dev->out_ep = out_ep; dev->status_ep = status_ep; /* Module params for these addresses should come from ID proms. * The host side address is used with CDC and RNDIS, and commonly * ends up in a persistent config database. It's not clear if * host side code for the SAFE thing cares -- its original BLAN * thing didn't, Sharp never assigned those addresses on Zaurii. */ if (get_ether_addr(dev_addr, net->dev_addr)) dev_warn(&gadget->dev, "using random %s ethernet address\n", "self"); if (get_ether_addr(host_addr, dev->host_mac)) dev_warn(&gadget->dev, "using random %s ethernet address\n", "host"); snprintf (ethaddr, sizeof ethaddr, "%02X%02X%02X%02X%02X%02X", dev->host_mac [0], dev->host_mac [1], dev->host_mac [2], dev->host_mac [3], dev->host_mac [4], dev->host_mac [5]); if (rndis) { status = rndis_init(); if (status < 0) { dev_err (&gadget->dev, "can't init RNDIS, %d\n", status); goto fail; } } net->change_mtu = eth_change_mtu; net->get_stats = eth_get_stats; net->hard_start_xmit = eth_start_xmit; net->open = eth_open; net->stop = eth_stop; // watchdog_timeo, tx_timeout ... // set_multicast_list SET_ETHTOOL_OPS(net, &ops); /* preallocate control message data and buffer */ dev->req = eth_req_alloc (gadget->ep0, USB_BUFSIZ, GFP_KERNEL); if (!dev->req) goto fail; dev->req->complete = eth_setup_complete; /* ... and maybe likewise for status transfer */ #if defined(DEV_CONFIG_CDC) || defined(CONFIG_USB_ETH_RNDIS) if (dev->status_ep) { dev->stat_req = eth_req_alloc (dev->status_ep, STATUS_BYTECOUNT, GFP_KERNEL); if (!dev->stat_req) { eth_req_free (gadget->ep0, dev->req); goto fail; } dev->stat_req->context = NULL; } #endif /* finish hookup to lower layer ... */ dev->gadget = gadget; set_gadget_data (gadget, dev); gadget->ep0->driver_data = dev; /* two kinds of host-initiated state changes: * - iff DATA transfer is active, carrier is "on" * - tx queueing enabled if open *and* carrier is "on" */ netif_stop_queue (dev->net); netif_carrier_off (dev->net); SET_NETDEV_DEV (dev->net, &gadget->dev); status = register_netdev (dev->net); if (status < 0) goto fail1; INFO (dev, "%s, version: " DRIVER_VERSION "\n", driver_desc); INFO (dev, "using %s, OUT %s IN %s%s%s\n", gadget->name, out_ep->name, in_ep->name, status_ep ? " STATUS " : "", status_ep ? status_ep->name : "" ); INFO (dev, "MAC %02x:%02x:%02x:%02x:%02x:%02x\n", net->dev_addr [0], net->dev_addr [1], net->dev_addr [2], net->dev_addr [3], net->dev_addr [4], net->dev_addr [5]); if (cdc || rndis) INFO (dev, "HOST MAC %02x:%02x:%02x:%02x:%02x:%02x\n", dev->host_mac [0], dev->host_mac [1], dev->host_mac [2], dev->host_mac [3], dev->host_mac [4], dev->host_mac [5]); if (rndis) { u32 vendorID = 0; /* FIXME RNDIS vendor id == "vendor NIC code" == ? */ dev->rndis_config = rndis_register (rndis_control_ack); if (dev->rndis_config < 0) { fail0: unregister_netdev (dev->net); status = -ENODEV; goto fail; } /* these set up a lot of the OIDs that RNDIS needs */ rndis_set_host_mac (dev->rndis_config, dev->host_mac); if (rndis_set_param_dev (dev->rndis_config, dev->net, &dev->stats, &dev->cdc_filter)) goto fail0; if (rndis_set_param_vendor (dev->rndis_config, vendorID, manufacturer)) goto fail0; if (rndis_set_param_medium (dev->rndis_config, NDIS_MEDIUM_802_3, 0)) goto fail0; INFO (dev, "RNDIS ready\n"); } return status; fail1: dev_dbg(&gadget->dev, "register_netdev failed, %d\n", status); fail: eth_unbind (gadget); return status; } /*-------------------------------------------------------------------------*/ static void eth_suspend (struct usb_gadget *gadget) { struct eth_dev *dev = get_gadget_data (gadget); DEBUG (dev, "suspend\n"); dev->suspended = 1; } static void eth_resume (struct usb_gadget *gadget) { struct eth_dev *dev = get_gadget_data (gadget); DEBUG (dev, "resume\n"); dev->suspended = 0; } /*-------------------------------------------------------------------------*/ static struct usb_gadget_driver eth_driver = { .speed = DEVSPEED, .function = (char *) driver_desc, .bind = eth_bind, .unbind = eth_unbind, .setup = eth_setup, .disconnect = eth_disconnect, .suspend = eth_suspend, .resume = eth_resume, .driver = { .name = (char *) shortname, .owner = THIS_MODULE, }, }; MODULE_DESCRIPTION (DRIVER_DESC); MODULE_AUTHOR ("David Brownell, Benedikt Spanger"); MODULE_LICENSE ("GPL"); static int __init init (void) { return usb_gadget_register_driver (ð_driver); } module_init (init); static void __exit cleanup (void) { usb_gadget_unregister_driver (ð_driver); } module_exit (cleanup);