/* * Copyright (C) 2004 Benjamin Herrenschmuidt (benh@kernel.crashing.org), * IBM Corp. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * as published by the Free Software Foundation; either version * 2 of the License, or (at your option) any later version. */ #define DEBUG #include #include #include #include #include #include #include #include #include #include #include #include #include "pci.h" #ifdef DEBUG #define DBG(x...) printk(x) #else #define DBG(x...) #endif static struct pci_controller *u3_agp, *u3_ht; static int __init fixup_one_level_bus_range(struct device_node *node, int higher) { for (; node != 0;node = node->sibling) { int * bus_range; unsigned int *class_code; int len; /* For PCI<->PCI bridges or CardBus bridges, we go down */ class_code = (unsigned int *) get_property(node, "class-code", NULL); if (!class_code || ((*class_code >> 8) != PCI_CLASS_BRIDGE_PCI && (*class_code >> 8) != PCI_CLASS_BRIDGE_CARDBUS)) continue; bus_range = (int *) get_property(node, "bus-range", &len); if (bus_range != NULL && len > 2 * sizeof(int)) { if (bus_range[1] > higher) higher = bus_range[1]; } higher = fixup_one_level_bus_range(node->child, higher); } return higher; } /* This routine fixes the "bus-range" property of all bridges in the * system since they tend to have their "last" member wrong on macs * * Note that the bus numbers manipulated here are OF bus numbers, they * are not Linux bus numbers. */ static void __init fixup_bus_range(struct device_node *bridge) { int * bus_range; int len; /* Lookup the "bus-range" property for the hose */ bus_range = (int *) get_property(bridge, "bus-range", &len); if (bus_range == NULL || len < 2 * sizeof(int)) { printk(KERN_WARNING "Can't get bus-range for %s\n", bridge->full_name); return; } bus_range[1] = fixup_one_level_bus_range(bridge->child, bus_range[1]); } #define U3_AGP_CFA0(devfn, off) \ ((1 << (unsigned long)PCI_SLOT(dev_fn)) \ | (((unsigned long)PCI_FUNC(dev_fn)) << 8) \ | (((unsigned long)(off)) & 0xFCUL)) #define U3_AGP_CFA1(bus, devfn, off) \ ((((unsigned long)(bus)) << 16) \ |(((unsigned long)(devfn)) << 8) \ |(((unsigned long)(off)) & 0xFCUL) \ |1UL) static unsigned long u3_agp_cfg_access(struct pci_controller* hose, u8 bus, u8 dev_fn, u8 offset) { unsigned int caddr; if (bus == hose->first_busno) { if (dev_fn < (11 << 3)) return 0; caddr = U3_AGP_CFA0(dev_fn, offset); } else caddr = U3_AGP_CFA1(bus, dev_fn, offset); /* Uninorth will return garbage if we don't read back the value ! */ do { out_le32(hose->cfg_addr, caddr); } while (in_le32(hose->cfg_addr) != caddr); offset &= 0x07; return ((unsigned long)hose->cfg_data) + offset; } static int u3_agp_read_config(struct pci_bus *bus, unsigned int devfn, int offset, int len, u32 *val) { struct pci_controller *hose; unsigned long addr; hose = pci_bus_to_host(bus); if (hose == NULL) return PCIBIOS_DEVICE_NOT_FOUND; addr = u3_agp_cfg_access(hose, bus->number, devfn, offset); if (!addr) return PCIBIOS_DEVICE_NOT_FOUND; /* * Note: the caller has already checked that offset is * suitably aligned and that len is 1, 2 or 4. */ switch (len) { case 1: *val = in_8((u8 *)addr); break; case 2: *val = in_le16((u16 *)addr); break; default: *val = in_le32((u32 *)addr); break; } return PCIBIOS_SUCCESSFUL; } static int u3_agp_write_config(struct pci_bus *bus, unsigned int devfn, int offset, int len, u32 val) { struct pci_controller *hose; unsigned long addr; hose = pci_bus_to_host(bus); if (hose == NULL) return PCIBIOS_DEVICE_NOT_FOUND; addr = u3_agp_cfg_access(hose, bus->number, devfn, offset); if (!addr) return PCIBIOS_DEVICE_NOT_FOUND; /* * Note: the caller has already checked that offset is * suitably aligned and that len is 1, 2 or 4. */ switch (len) { case 1: out_8((u8 *)addr, val); (void) in_8((u8 *)addr); break; case 2: out_le16((u16 *)addr, val); (void) in_le16((u16 *)addr); break; default: out_le32((u32 *)addr, val); (void) in_le32((u32 *)addr); break; } return PCIBIOS_SUCCESSFUL; } static struct pci_ops u3_agp_pci_ops = { u3_agp_read_config, u3_agp_write_config }; #define U3_HT_CFA0(devfn, off) \ ((((unsigned long)devfn) << 8) | offset) #define U3_HT_CFA1(bus, devfn, off) \ (U3_HT_CFA0(devfn, off) \ + (((unsigned long)bus) << 16) \ + 0x01000000UL) static unsigned long u3_ht_cfg_access(struct pci_controller* hose, u8 bus, u8 devfn, u8 offset) { if (bus == hose->first_busno) { if (PCI_SLOT(devfn) == 0) return 0; return ((unsigned long)hose->cfg_data) + U3_HT_CFA0(devfn, offset); } else return ((unsigned long)hose->cfg_data) + U3_HT_CFA1(bus, devfn, offset); } static int u3_ht_read_config(struct pci_bus *bus, unsigned int devfn, int offset, int len, u32 *val) { struct pci_controller *hose; unsigned long addr; hose = pci_bus_to_host(bus); if (hose == NULL) return PCIBIOS_DEVICE_NOT_FOUND; addr = u3_ht_cfg_access(hose, bus->number, devfn, offset); if (!addr) return PCIBIOS_DEVICE_NOT_FOUND; /* * Note: the caller has already checked that offset is * suitably aligned and that len is 1, 2 or 4. */ switch (len) { case 1: *val = in_8((u8 *)addr); break; case 2: *val = in_le16((u16 *)addr); break; default: *val = in_le32((u32 *)addr); break; } return PCIBIOS_SUCCESSFUL; } static int u3_ht_write_config(struct pci_bus *bus, unsigned int devfn, int offset, int len, u32 val) { struct pci_controller *hose; unsigned long addr; hose = pci_bus_to_host(bus); if (hose == NULL) return PCIBIOS_DEVICE_NOT_FOUND; addr = u3_ht_cfg_access(hose, bus->number, devfn, offset); if (!addr) return PCIBIOS_DEVICE_NOT_FOUND; /* * Note: the caller has already checked that offset is * suitably aligned and that len is 1, 2 or 4. */ switch (len) { case 1: out_8((u8 *)addr, val); (void) in_8((u8 *)addr); break; case 2: out_le16((u16 *)addr, val); (void) in_le16((u16 *)addr); break; default: out_le32((u32 *)addr, val); (void) in_le32((u32 *)addr); break; } return PCIBIOS_SUCCESSFUL; } static struct pci_ops u3_ht_pci_ops = { u3_ht_read_config, u3_ht_write_config }; static void __init setup_u3_agp(struct pci_controller* hose) { /* On G5, we move AGP up to high bus number so we don't need * to reassign bus numbers for HT. If we ever have P2P bridges * on AGP, we'll have to move pci_assign_all_busses to the * pci_controller structure so we enable it for AGP and not for * HT childs. * We hard code the address because of the different size of * the reg address cell, we shall fix that by killing struct * reg_property and using some accessor functions instead */ hose->first_busno = 0xf0; hose->last_busno = 0xff; hose->ops = &u3_agp_pci_ops; hose->cfg_addr = ioremap(0xf0000000 + 0x800000, 0x1000); hose->cfg_data = ioremap(0xf0000000 + 0xc00000, 0x1000); u3_agp = hose; } static void __init setup_u3_ht(struct pci_controller* hose) { hose->ops = &u3_ht_pci_ops; /* We hard code the address because of the different size of * the reg address cell, we shall fix that by killing struct * reg_property and using some accessor functions instead */ hose->cfg_data = (volatile unsigned char *)ioremap(0xf2000000, 0x02000000); hose->first_busno = 0; hose->last_busno = 0xef; u3_ht = hose; } static int __init add_bridge(struct device_node *dev) { int len; struct pci_controller *hose; char* disp_name; int *bus_range; int primary = 1; struct property *of_prop; DBG("Adding PCI host bridge %s\n", dev->full_name); bus_range = (int *) get_property(dev, "bus-range", &len); if (bus_range == NULL || len < 2 * sizeof(int)) { printk(KERN_WARNING "Can't get bus-range for %s, assume bus 0\n", dev->full_name); } hose = alloc_bootmem(sizeof(struct pci_controller)); if (hose == NULL) return -ENOMEM; pci_setup_pci_controller(hose); hose->arch_data = dev; hose->first_busno = bus_range ? bus_range[0] : 0; hose->last_busno = bus_range ? bus_range[1] : 0xff; of_prop = alloc_bootmem(sizeof(struct property) + sizeof(hose->global_number)); if (of_prop) { memset(of_prop, 0, sizeof(struct property)); of_prop->name = "linux,pci-domain"; of_prop->length = sizeof(hose->global_number); of_prop->value = (unsigned char *)&of_prop[1]; memcpy(of_prop->value, &hose->global_number, sizeof(hose->global_number)); prom_add_property(dev, of_prop); } disp_name = NULL; if (device_is_compatible(dev, "u3-agp")) { setup_u3_agp(hose); disp_name = "U3-AGP"; primary = 0; } else if (device_is_compatible(dev, "u3-ht")) { setup_u3_ht(hose); disp_name = "U3-HT"; primary = 1; } printk(KERN_INFO "Found %s PCI host bridge. Firmware bus number: %d->%d\n", disp_name, hose->first_busno, hose->last_busno); /* Interpret the "ranges" property */ /* This also maps the I/O region and sets isa_io/mem_base */ pci_process_bridge_OF_ranges(hose, dev); pci_setup_phb_io(hose, primary); /* Fixup "bus-range" OF property */ fixup_bus_range(dev); return 0; } void __init maple_pcibios_fixup(void) { struct pci_dev *dev = NULL; DBG(" -> maple_pcibios_fixup\n"); for_each_pci_dev(dev) pci_read_irq_line(dev); /* Do the mapping of the IO space */ phbs_remap_io(); DBG(" <- maple_pcibios_fixup\n"); } static void __init maple_fixup_phb_resources(void) { struct pci_controller *hose, *tmp; list_for_each_entry_safe(hose, tmp, &hose_list, list_node) { unsigned long offset = (unsigned long)hose->io_base_virt - pci_io_base; hose->io_resource.start += offset; hose->io_resource.end += offset; printk(KERN_INFO "PCI Host %d, io start: %lx; io end: %lx\n", hose->global_number, hose->io_resource.start, hose->io_resource.end); } } void __init maple_pci_init(void) { struct device_node *np, *root; struct device_node *ht = NULL; /* Probe root PCI hosts, that is on U3 the AGP host and the * HyperTransport host. That one is actually "kept" around * and actually added last as it's resource management relies * on the AGP resources to have been setup first */ root = of_find_node_by_path("/"); if (root == NULL) { printk(KERN_CRIT "maple_find_bridges: can't find root of device tree\n"); return; } for (np = NULL; (np = of_get_next_child(root, np)) != NULL;) { if (np->name == NULL) continue; if (strcmp(np->name, "pci") == 0) { if (add_bridge(np) == 0) of_node_get(np); } if (strcmp(np->name, "ht") == 0) { of_node_get(np); ht = np; } } of_node_put(root); /* Now setup the HyperTransport host if we found any */ if (ht && add_bridge(ht) != 0) of_node_put(ht); /* Fixup the IO resources on our host bridges as the common code * does it only for childs of the host bridges */ maple_fixup_phb_resources(); /* Setup the linkage between OF nodes and PHBs */ pci_devs_phb_init(); /* Fixup the PCI<->OF mapping for U3 AGP due to bus renumbering. We * assume there is no P2P bridge on the AGP bus, which should be a * safe assumptions hopefully. */ if (u3_agp) { struct device_node *np = u3_agp->arch_data; PCI_DN(np)->busno = 0xf0; for (np = np->child; np; np = np->sibling) PCI_DN(np)->busno = 0xf0; } /* Tell pci.c to use the common resource allocation mecanism */ pci_probe_only = 0; /* Allow all IO */ io_page_mask = -1; } int maple_pci_get_legacy_ide_irq(struct pci_dev *pdev, int channel) { struct device_node *np; int irq = channel ? 15 : 14; if (pdev->vendor != PCI_VENDOR_ID_AMD || pdev->device != PCI_DEVICE_ID_AMD_8111_IDE) return irq; np = pci_device_to_OF_node(pdev); if (np == NULL) return irq; if (np->n_intrs < 2) return irq; return np->intrs[channel & 0x1].line; } /* XXX: To remove once all firmwares are ok */ static void fixup_maple_ide(struct pci_dev* dev) { #if 0 /* Enable this to enable IDE port 0 */ { u8 v; pci_read_config_byte(dev, 0x40, &v); v |= 2; pci_write_config_byte(dev, 0x40, v); } #endif #if 0 /* fix bus master base */ pci_write_config_dword(dev, 0x20, 0xcc01); printk("old ide resource: %lx -> %lx \n", dev->resource[4].start, dev->resource[4].end); dev->resource[4].start = 0xcc00; dev->resource[4].end = 0xcc10; #endif #if 1 /* Enable this to fixup IDE sense/polarity of irqs in IO-APICs */ { struct pci_dev *apicdev; u32 v; apicdev = pci_get_slot (dev->bus, PCI_DEVFN(5,0)); if (apicdev == NULL) printk("IDE Fixup IRQ: Can't find IO-APIC !\n"); else { pci_write_config_byte(apicdev, 0xf2, 0x10 + 2*14); pci_read_config_dword(apicdev, 0xf4, &v); v &= ~0x00000022; pci_write_config_dword(apicdev, 0xf4, v); pci_write_config_byte(apicdev, 0xf2, 0x10 + 2*15); pci_read_config_dword(apicdev, 0xf4, &v); v &= ~0x00000022; pci_write_config_dword(apicdev, 0xf4, v); pci_dev_put(apicdev); } } #endif } DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8111_IDE, fixup_maple_ide);