From cb836a977f71f76ccbb1ff35b9c113ace96377e9 Mon Sep 17 00:00:00 2001 From: Don Skidmore Date: Tue, 29 Jun 2010 18:30:59 +0000 Subject: ixgbe: add 1g PHY support for 82599 Add support for 1G SFP+ PHY's to 82599. Signed-off-by: Don Skidmore Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/ixgbe/ixgbe_phy.c | 33 +++++++++++++++++++++++++++++---- 1 file changed, 29 insertions(+), 4 deletions(-) (limited to 'drivers/net/ixgbe/ixgbe_phy.c') diff --git a/drivers/net/ixgbe/ixgbe_phy.c b/drivers/net/ixgbe/ixgbe_phy.c index 48325a5beff..6c0d42e33f2 100644 --- a/drivers/net/ixgbe/ixgbe_phy.c +++ b/drivers/net/ixgbe/ixgbe_phy.c @@ -577,6 +577,8 @@ s32 ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw) * 6 SFP_SR/LR_CORE1 - 82599-specific * 7 SFP_act_lmt_DA_CORE0 - 82599-specific * 8 SFP_act_lmt_DA_CORE1 - 82599-specific + * 9 SFP_1g_cu_CORE0 - 82599-specific + * 10 SFP_1g_cu_CORE1 - 82599-specific */ if (hw->mac.type == ixgbe_mac_82598EB) { if (cable_tech & IXGBE_SFF_DA_PASSIVE_CABLE) @@ -625,6 +627,13 @@ s32 ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw) else hw->phy.sfp_type = ixgbe_sfp_type_srlr_core1; + else if (comp_codes_1g & IXGBE_SFF_1GBASET_CAPABLE) + if (hw->bus.lan_id == 0) + hw->phy.sfp_type = + ixgbe_sfp_type_1g_cu_core0; + else + hw->phy.sfp_type = + ixgbe_sfp_type_1g_cu_core1; else hw->phy.sfp_type = ixgbe_sfp_type_unknown; } @@ -696,8 +705,10 @@ s32 ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw) goto out; } - /* 1G SFP modules are not supported */ - if (comp_codes_10g == 0) { + /* Verify supported 1G SFP modules */ + if (comp_codes_10g == 0 && + !(hw->phy.sfp_type == ixgbe_sfp_type_1g_cu_core1 || + hw->phy.sfp_type == ixgbe_sfp_type_1g_cu_core0)) { hw->phy.type = ixgbe_phy_sfp_unsupported; status = IXGBE_ERR_SFP_NOT_SUPPORTED; goto out; @@ -711,7 +722,9 @@ s32 ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw) /* This is guaranteed to be 82599, no need to check for NULL */ hw->mac.ops.get_device_caps(hw, &enforce_sfp); - if (!(enforce_sfp & IXGBE_DEVICE_CAPS_ALLOW_ANY_SFP)) { + if (!(enforce_sfp & IXGBE_DEVICE_CAPS_ALLOW_ANY_SFP) && + !((hw->phy.sfp_type == ixgbe_sfp_type_1g_cu_core0) || + (hw->phy.sfp_type == ixgbe_sfp_type_1g_cu_core1))) { /* Make sure we're a supported PHY type */ if (hw->phy.type == ixgbe_phy_sfp_intel) { status = 0; @@ -742,6 +755,7 @@ s32 ixgbe_get_sfp_init_sequence_offsets(struct ixgbe_hw *hw, u16 *data_offset) { u16 sfp_id; + u16 sfp_type = hw->phy.sfp_type; if (hw->phy.sfp_type == ixgbe_sfp_type_unknown) return IXGBE_ERR_SFP_NOT_SUPPORTED; @@ -753,6 +767,17 @@ s32 ixgbe_get_sfp_init_sequence_offsets(struct ixgbe_hw *hw, (hw->phy.sfp_type == ixgbe_sfp_type_da_cu)) return IXGBE_ERR_SFP_NOT_SUPPORTED; + /* + * Limiting active cables and 1G Phys must be initialized as + * SR modules + */ + if (sfp_type == ixgbe_sfp_type_da_act_lmt_core0 || + sfp_type == ixgbe_sfp_type_1g_cu_core0) + sfp_type = ixgbe_sfp_type_srlr_core0; + else if (sfp_type == ixgbe_sfp_type_da_act_lmt_core1 || + sfp_type == ixgbe_sfp_type_1g_cu_core1) + sfp_type = ixgbe_sfp_type_srlr_core1; + /* Read offset to PHY init contents */ hw->eeprom.ops.read(hw, IXGBE_PHY_INIT_OFFSET_NL, list_offset); @@ -769,7 +794,7 @@ s32 ixgbe_get_sfp_init_sequence_offsets(struct ixgbe_hw *hw, hw->eeprom.ops.read(hw, *list_offset, &sfp_id); while (sfp_id != IXGBE_PHY_INIT_END_NL) { - if (sfp_id == hw->phy.sfp_type) { + if (sfp_id == sfp_type) { (*list_offset)++; hw->eeprom.ops.read(hw, *list_offset, data_offset); if ((!*data_offset) || (*data_offset == 0xFFFF)) { -- cgit v1.2.3