summaryrefslogtreecommitdiff
path: root/net/8021q
diff options
context:
space:
mode:
Diffstat (limited to 'net/8021q')
-rw-r--r--net/8021q/Makefile12
-rw-r--r--net/8021q/vlan.c774
-rw-r--r--net/8021q/vlan.h72
-rw-r--r--net/8021q/vlan_dev.c890
-rw-r--r--net/8021q/vlanproc.c357
-rw-r--r--net/8021q/vlanproc.h19
6 files changed, 2124 insertions, 0 deletions
diff --git a/net/8021q/Makefile b/net/8021q/Makefile
new file mode 100644
index 00000000000..97feb44dbdc
--- /dev/null
+++ b/net/8021q/Makefile
@@ -0,0 +1,12 @@
+#
+# Makefile for the Linux VLAN layer.
+#
+
+obj-$(CONFIG_VLAN_8021Q) += 8021q.o
+
+8021q-objs := vlan.o vlan_dev.o
+
+ifeq ($(CONFIG_PROC_FS),y)
+8021q-objs += vlanproc.o
+endif
+
diff --git a/net/8021q/vlan.c b/net/8021q/vlan.c
new file mode 100644
index 00000000000..1f6d31670bc
--- /dev/null
+++ b/net/8021q/vlan.c
@@ -0,0 +1,774 @@
+/*
+ * INET 802.1Q VLAN
+ * Ethernet-type device handling.
+ *
+ * Authors: Ben Greear <greearb@candelatech.com>
+ * Please send support related email to: vlan@scry.wanfear.com
+ * VLAN Home Page: http://www.candelatech.com/~greear/vlan.html
+ *
+ * Fixes:
+ * Fix for packet capture - Nick Eggleston <nick@dccinc.com>;
+ * Add HW acceleration hooks - David S. Miller <davem@redhat.com>;
+ * Correct all the locking - David S. Miller <davem@redhat.com>;
+ * Use hash table for VLAN groups - David S. Miller <davem@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <asm/uaccess.h> /* for copy_from_user */
+#include <linux/module.h>
+#include <linux/netdevice.h>
+#include <linux/skbuff.h>
+#include <net/datalink.h>
+#include <linux/mm.h>
+#include <linux/in.h>
+#include <linux/init.h>
+#include <net/p8022.h>
+#include <net/arp.h>
+#include <linux/rtnetlink.h>
+#include <linux/notifier.h>
+
+#include <linux/if_vlan.h>
+#include "vlan.h"
+#include "vlanproc.h"
+
+#define DRV_VERSION "1.8"
+
+/* Global VLAN variables */
+
+/* Our listing of VLAN group(s) */
+static struct hlist_head vlan_group_hash[VLAN_GRP_HASH_SIZE];
+#define vlan_grp_hashfn(IDX) ((((IDX) >> VLAN_GRP_HASH_SHIFT) ^ (IDX)) & VLAN_GRP_HASH_MASK)
+
+static char vlan_fullname[] = "802.1Q VLAN Support";
+static char vlan_version[] = DRV_VERSION;
+static char vlan_copyright[] = "Ben Greear <greearb@candelatech.com>";
+static char vlan_buggyright[] = "David S. Miller <davem@redhat.com>";
+
+static int vlan_device_event(struct notifier_block *, unsigned long, void *);
+static int vlan_ioctl_handler(void __user *);
+static int unregister_vlan_dev(struct net_device *, unsigned short );
+
+static struct notifier_block vlan_notifier_block = {
+ .notifier_call = vlan_device_event,
+};
+
+/* These may be changed at run-time through IOCTLs */
+
+/* Determines interface naming scheme. */
+unsigned short vlan_name_type = VLAN_NAME_TYPE_RAW_PLUS_VID_NO_PAD;
+
+static struct packet_type vlan_packet_type = {
+ .type = __constant_htons(ETH_P_8021Q),
+ .func = vlan_skb_recv, /* VLAN receive method */
+};
+
+/* Bits of netdev state that are propagated from real device to virtual */
+#define VLAN_LINK_STATE_MASK \
+ ((1<<__LINK_STATE_PRESENT)|(1<<__LINK_STATE_NOCARRIER))
+
+/* End of global variables definitions. */
+
+/*
+ * Function vlan_proto_init (pro)
+ *
+ * Initialize VLAN protocol layer,
+ *
+ */
+static int __init vlan_proto_init(void)
+{
+ int err;
+
+ printk(VLAN_INF "%s v%s %s\n",
+ vlan_fullname, vlan_version, vlan_copyright);
+ printk(VLAN_INF "All bugs added by %s\n",
+ vlan_buggyright);
+
+ /* proc file system initialization */
+ err = vlan_proc_init();
+ if (err < 0) {
+ printk(KERN_ERR
+ "%s %s: can't create entry in proc filesystem!\n",
+ __FUNCTION__, VLAN_NAME);
+ return err;
+ }
+
+ dev_add_pack(&vlan_packet_type);
+
+ /* Register us to receive netdevice events */
+ err = register_netdevice_notifier(&vlan_notifier_block);
+ if (err < 0) {
+ dev_remove_pack(&vlan_packet_type);
+ vlan_proc_cleanup();
+ return err;
+ }
+
+ vlan_ioctl_set(vlan_ioctl_handler);
+
+ return 0;
+}
+
+/* Cleanup all vlan devices
+ * Note: devices that have been registered that but not
+ * brought up will exist but have no module ref count.
+ */
+static void __exit vlan_cleanup_devices(void)
+{
+ struct net_device *dev, *nxt;
+
+ rtnl_lock();
+ for (dev = dev_base; dev; dev = nxt) {
+ nxt = dev->next;
+ if (dev->priv_flags & IFF_802_1Q_VLAN) {
+ unregister_vlan_dev(VLAN_DEV_INFO(dev)->real_dev,
+ VLAN_DEV_INFO(dev)->vlan_id);
+
+ unregister_netdevice(dev);
+ }
+ }
+ rtnl_unlock();
+}
+
+/*
+ * Module 'remove' entry point.
+ * o delete /proc/net/router directory and static entries.
+ */
+static void __exit vlan_cleanup_module(void)
+{
+ int i;
+
+ vlan_ioctl_set(NULL);
+
+ /* Un-register us from receiving netdevice events */
+ unregister_netdevice_notifier(&vlan_notifier_block);
+
+ dev_remove_pack(&vlan_packet_type);
+ vlan_cleanup_devices();
+
+ /* This table must be empty if there are no module
+ * references left.
+ */
+ for (i = 0; i < VLAN_GRP_HASH_SIZE; i++) {
+ BUG_ON(!hlist_empty(&vlan_group_hash[i]));
+ }
+ vlan_proc_cleanup();
+
+ synchronize_net();
+}
+
+module_init(vlan_proto_init);
+module_exit(vlan_cleanup_module);
+
+/* Must be invoked with RCU read lock (no preempt) */
+static struct vlan_group *__vlan_find_group(int real_dev_ifindex)
+{
+ struct vlan_group *grp;
+ struct hlist_node *n;
+ int hash = vlan_grp_hashfn(real_dev_ifindex);
+
+ hlist_for_each_entry_rcu(grp, n, &vlan_group_hash[hash], hlist) {
+ if (grp->real_dev_ifindex == real_dev_ifindex)
+ return grp;
+ }
+
+ return NULL;
+}
+
+/* Find the protocol handler. Assumes VID < VLAN_VID_MASK.
+ *
+ * Must be invoked with RCU read lock (no preempt)
+ */
+struct net_device *__find_vlan_dev(struct net_device *real_dev,
+ unsigned short VID)
+{
+ struct vlan_group *grp = __vlan_find_group(real_dev->ifindex);
+
+ if (grp)
+ return grp->vlan_devices[VID];
+
+ return NULL;
+}
+
+static void vlan_rcu_free(struct rcu_head *rcu)
+{
+ kfree(container_of(rcu, struct vlan_group, rcu));
+}
+
+
+/* This returns 0 if everything went fine.
+ * It will return 1 if the group was killed as a result.
+ * A negative return indicates failure.
+ *
+ * The RTNL lock must be held.
+ */
+static int unregister_vlan_dev(struct net_device *real_dev,
+ unsigned short vlan_id)
+{
+ struct net_device *dev = NULL;
+ int real_dev_ifindex = real_dev->ifindex;
+ struct vlan_group *grp;
+ int i, ret;
+
+#ifdef VLAN_DEBUG
+ printk(VLAN_DBG "%s: VID: %i\n", __FUNCTION__, vlan_id);
+#endif
+
+ /* sanity check */
+ if (vlan_id >= VLAN_VID_MASK)
+ return -EINVAL;
+
+ ASSERT_RTNL();
+ grp = __vlan_find_group(real_dev_ifindex);
+
+ ret = 0;
+
+ if (grp) {
+ dev = grp->vlan_devices[vlan_id];
+ if (dev) {
+ /* Remove proc entry */
+ vlan_proc_rem_dev(dev);
+
+ /* Take it out of our own structures, but be sure to
+ * interlock with HW accelerating devices or SW vlan
+ * input packet processing.
+ */
+ if (real_dev->features &
+ (NETIF_F_HW_VLAN_RX | NETIF_F_HW_VLAN_FILTER)) {
+ real_dev->vlan_rx_kill_vid(real_dev, vlan_id);
+ }
+
+ grp->vlan_devices[vlan_id] = NULL;
+ synchronize_net();
+
+
+ /* Caller unregisters (and if necessary, puts)
+ * VLAN device, but we get rid of the reference to
+ * real_dev here.
+ */
+ dev_put(real_dev);
+
+ /* If the group is now empty, kill off the
+ * group.
+ */
+ for (i = 0; i < VLAN_VID_MASK; i++)
+ if (grp->vlan_devices[i])
+ break;
+
+ if (i == VLAN_VID_MASK) {
+ if (real_dev->features & NETIF_F_HW_VLAN_RX)
+ real_dev->vlan_rx_register(real_dev, NULL);
+
+ hlist_del_rcu(&grp->hlist);
+
+ /* Free the group, after all cpu's are done. */
+ call_rcu(&grp->rcu, vlan_rcu_free);
+
+ grp = NULL;
+ ret = 1;
+ }
+ }
+ }
+
+ return ret;
+}
+
+static int unregister_vlan_device(const char *vlan_IF_name)
+{
+ struct net_device *dev = NULL;
+ int ret;
+
+
+ dev = dev_get_by_name(vlan_IF_name);
+ ret = -EINVAL;
+ if (dev) {
+ if (dev->priv_flags & IFF_802_1Q_VLAN) {
+ rtnl_lock();
+
+ ret = unregister_vlan_dev(VLAN_DEV_INFO(dev)->real_dev,
+ VLAN_DEV_INFO(dev)->vlan_id);
+
+ dev_put(dev);
+ unregister_netdevice(dev);
+
+ rtnl_unlock();
+
+ if (ret == 1)
+ ret = 0;
+ } else {
+ printk(VLAN_ERR
+ "%s: ERROR: Tried to remove a non-vlan device "
+ "with VLAN code, name: %s priv_flags: %hX\n",
+ __FUNCTION__, dev->name, dev->priv_flags);
+ dev_put(dev);
+ ret = -EPERM;
+ }
+ } else {
+#ifdef VLAN_DEBUG
+ printk(VLAN_DBG "%s: WARNING: Could not find dev.\n", __FUNCTION__);
+#endif
+ ret = -EINVAL;
+ }
+
+ return ret;
+}
+
+static void vlan_setup(struct net_device *new_dev)
+{
+ SET_MODULE_OWNER(new_dev);
+
+ /* new_dev->ifindex = 0; it will be set when added to
+ * the global list.
+ * iflink is set as well.
+ */
+ new_dev->get_stats = vlan_dev_get_stats;
+
+ /* Make this thing known as a VLAN device */
+ new_dev->priv_flags |= IFF_802_1Q_VLAN;
+
+ /* Set us up to have no queue, as the underlying Hardware device
+ * can do all the queueing we could want.
+ */
+ new_dev->tx_queue_len = 0;
+
+ /* set up method calls */
+ new_dev->change_mtu = vlan_dev_change_mtu;
+ new_dev->open = vlan_dev_open;
+ new_dev->stop = vlan_dev_stop;
+ new_dev->set_mac_address = vlan_dev_set_mac_address;
+ new_dev->set_multicast_list = vlan_dev_set_multicast_list;
+ new_dev->destructor = free_netdev;
+ new_dev->do_ioctl = vlan_dev_ioctl;
+}
+
+/* Attach a VLAN device to a mac address (ie Ethernet Card).
+ * Returns the device that was created, or NULL if there was
+ * an error of some kind.
+ */
+static struct net_device *register_vlan_device(const char *eth_IF_name,
+ unsigned short VLAN_ID)
+{
+ struct vlan_group *grp;
+ struct net_device *new_dev;
+ struct net_device *real_dev; /* the ethernet device */
+ char name[IFNAMSIZ];
+
+#ifdef VLAN_DEBUG
+ printk(VLAN_DBG "%s: if_name -:%s:- vid: %i\n",
+ __FUNCTION__, eth_IF_name, VLAN_ID);
+#endif
+
+ if (VLAN_ID >= VLAN_VID_MASK)
+ goto out_ret_null;
+
+ /* find the device relating to eth_IF_name. */
+ real_dev = dev_get_by_name(eth_IF_name);
+ if (!real_dev)
+ goto out_ret_null;
+
+ if (real_dev->features & NETIF_F_VLAN_CHALLENGED) {
+ printk(VLAN_DBG "%s: VLANs not supported on %s.\n",
+ __FUNCTION__, real_dev->name);
+ goto out_put_dev;
+ }
+
+ if ((real_dev->features & NETIF_F_HW_VLAN_RX) &&
+ (real_dev->vlan_rx_register == NULL ||
+ real_dev->vlan_rx_kill_vid == NULL)) {
+ printk(VLAN_DBG "%s: Device %s has buggy VLAN hw accel.\n",
+ __FUNCTION__, real_dev->name);
+ goto out_put_dev;
+ }
+
+ if ((real_dev->features & NETIF_F_HW_VLAN_FILTER) &&
+ (real_dev->vlan_rx_add_vid == NULL ||
+ real_dev->vlan_rx_kill_vid == NULL)) {
+ printk(VLAN_DBG "%s: Device %s has buggy VLAN hw accel.\n",
+ __FUNCTION__, real_dev->name);
+ goto out_put_dev;
+ }
+
+ /* From this point on, all the data structures must remain
+ * consistent.
+ */
+ rtnl_lock();
+
+ /* The real device must be up and operating in order to
+ * assosciate a VLAN device with it.
+ */
+ if (!(real_dev->flags & IFF_UP))
+ goto out_unlock;
+
+ if (__find_vlan_dev(real_dev, VLAN_ID) != NULL) {
+ /* was already registered. */
+ printk(VLAN_DBG "%s: ALREADY had VLAN registered\n", __FUNCTION__);
+ goto out_unlock;
+ }
+
+ /* Gotta set up the fields for the device. */
+#ifdef VLAN_DEBUG
+ printk(VLAN_DBG "About to allocate name, vlan_name_type: %i\n",
+ vlan_name_type);
+#endif
+ switch (vlan_name_type) {
+ case VLAN_NAME_TYPE_RAW_PLUS_VID:
+ /* name will look like: eth1.0005 */
+ snprintf(name, IFNAMSIZ, "%s.%.4i", real_dev->name, VLAN_ID);
+ break;
+ case VLAN_NAME_TYPE_PLUS_VID_NO_PAD:
+ /* Put our vlan.VID in the name.
+ * Name will look like: vlan5
+ */
+ snprintf(name, IFNAMSIZ, "vlan%i", VLAN_ID);
+ break;
+ case VLAN_NAME_TYPE_RAW_PLUS_VID_NO_PAD:
+ /* Put our vlan.VID in the name.
+ * Name will look like: eth0.5
+ */
+ snprintf(name, IFNAMSIZ, "%s.%i", real_dev->name, VLAN_ID);
+ break;
+ case VLAN_NAME_TYPE_PLUS_VID:
+ /* Put our vlan.VID in the name.
+ * Name will look like: vlan0005
+ */
+ default:
+ snprintf(name, IFNAMSIZ, "vlan%.4i", VLAN_ID);
+ };
+
+ new_dev = alloc_netdev(sizeof(struct vlan_dev_info), name,
+ vlan_setup);
+ if (new_dev == NULL)
+ goto out_unlock;
+
+#ifdef VLAN_DEBUG
+ printk(VLAN_DBG "Allocated new name -:%s:-\n", new_dev->name);
+#endif
+ /* IFF_BROADCAST|IFF_MULTICAST; ??? */
+ new_dev->flags = real_dev->flags;
+ new_dev->flags &= ~IFF_UP;
+
+ new_dev->state = real_dev->state & VLAN_LINK_STATE_MASK;
+
+ /* need 4 bytes for extra VLAN header info,
+ * hope the underlying device can handle it.
+ */
+ new_dev->mtu = real_dev->mtu;
+
+ /* TODO: maybe just assign it to be ETHERNET? */
+ new_dev->type = real_dev->type;
+
+ new_dev->hard_header_len = real_dev->hard_header_len;
+ if (!(real_dev->features & NETIF_F_HW_VLAN_TX)) {
+ /* Regular ethernet + 4 bytes (18 total). */
+ new_dev->hard_header_len += VLAN_HLEN;
+ }
+
+ VLAN_MEM_DBG("new_dev->priv malloc, addr: %p size: %i\n",
+ new_dev->priv,
+ sizeof(struct vlan_dev_info));
+
+ memcpy(new_dev->broadcast, real_dev->broadcast, real_dev->addr_len);
+ memcpy(new_dev->dev_addr, real_dev->dev_addr, real_dev->addr_len);
+ new_dev->addr_len = real_dev->addr_len;
+
+ if (real_dev->features & NETIF_F_HW_VLAN_TX) {
+ new_dev->hard_header = real_dev->hard_header;
+ new_dev->hard_start_xmit = vlan_dev_hwaccel_hard_start_xmit;
+ new_dev->rebuild_header = real_dev->rebuild_header;
+ } else {
+ new_dev->hard_header = vlan_dev_hard_header;
+ new_dev->hard_start_xmit = vlan_dev_hard_start_xmit;
+ new_dev->rebuild_header = vlan_dev_rebuild_header;
+ }
+ new_dev->hard_header_parse = real_dev->hard_header_parse;
+
+ VLAN_DEV_INFO(new_dev)->vlan_id = VLAN_ID; /* 1 through VLAN_VID_MASK */
+ VLAN_DEV_INFO(new_dev)->real_dev = real_dev;
+ VLAN_DEV_INFO(new_dev)->dent = NULL;
+ VLAN_DEV_INFO(new_dev)->flags = 1;
+
+#ifdef VLAN_DEBUG
+ printk(VLAN_DBG "About to go find the group for idx: %i\n",
+ real_dev->ifindex);
+#endif
+
+ if (register_netdevice(new_dev))
+ goto out_free_newdev;
+
+ /* So, got the sucker initialized, now lets place
+ * it into our local structure.
+ */
+ grp = __vlan_find_group(real_dev->ifindex);
+
+ /* Note, we are running under the RTNL semaphore
+ * so it cannot "appear" on us.
+ */
+ if (!grp) { /* need to add a new group */
+ grp = kmalloc(sizeof(struct vlan_group), GFP_KERNEL);
+ if (!grp)
+ goto out_free_unregister;
+
+ /* printk(KERN_ALERT "VLAN REGISTER: Allocated new group.\n"); */
+ memset(grp, 0, sizeof(struct vlan_group));
+ grp->real_dev_ifindex = real_dev->ifindex;
+
+ hlist_add_head_rcu(&grp->hlist,
+ &vlan_group_hash[vlan_grp_hashfn(real_dev->ifindex)]);
+
+ if (real_dev->features & NETIF_F_HW_VLAN_RX)
+ real_dev->vlan_rx_register(real_dev, grp);
+ }
+
+ grp->vlan_devices[VLAN_ID] = new_dev;
+
+ if (vlan_proc_add_dev(new_dev)<0)/* create it's proc entry */
+ printk(KERN_WARNING "VLAN: failed to add proc entry for %s\n",
+ new_dev->name);
+
+ if (real_dev->features & NETIF_F_HW_VLAN_FILTER)
+ real_dev->vlan_rx_add_vid(real_dev, VLAN_ID);
+
+ rtnl_unlock();
+
+
+#ifdef VLAN_DEBUG
+ printk(VLAN_DBG "Allocated new device successfully, returning.\n");
+#endif
+ return new_dev;
+
+out_free_unregister:
+ unregister_netdev(new_dev);
+ goto out_unlock;
+
+out_free_newdev:
+ free_netdev(new_dev);
+
+out_unlock:
+ rtnl_unlock();
+
+out_put_dev:
+ dev_put(real_dev);
+
+out_ret_null:
+ return NULL;
+}
+
+static int vlan_device_event(struct notifier_block *unused, unsigned long event, void *ptr)
+{
+ struct net_device *dev = ptr;
+ struct vlan_group *grp = __vlan_find_group(dev->ifindex);
+ int i, flgs;
+ struct net_device *vlandev;
+
+ if (!grp)
+ goto out;
+
+ /* It is OK that we do not hold the group lock right now,
+ * as we run under the RTNL lock.
+ */
+
+ switch (event) {
+ case NETDEV_CHANGE:
+ /* Propagate real device state to vlan devices */
+ flgs = dev->state & VLAN_LINK_STATE_MASK;
+ for (i = 0; i < VLAN_GROUP_ARRAY_LEN; i++) {
+ vlandev = grp->vlan_devices[i];
+ if (!vlandev)
+ continue;
+
+ if ((vlandev->state & VLAN_LINK_STATE_MASK) != flgs) {
+ vlandev->state = (vlandev->state &~ VLAN_LINK_STATE_MASK)
+ | flgs;
+ netdev_state_change(vlandev);
+ }
+ }
+ break;
+
+ case NETDEV_DOWN:
+ /* Put all VLANs for this dev in the down state too. */
+ for (i = 0; i < VLAN_GROUP_ARRAY_LEN; i++) {
+ vlandev = grp->vlan_devices[i];
+ if (!vlandev)
+ continue;
+
+ flgs = vlandev->flags;
+ if (!(flgs & IFF_UP))
+ continue;
+
+ dev_change_flags(vlandev, flgs & ~IFF_UP);
+ }
+ break;
+
+ case NETDEV_UP:
+ /* Put all VLANs for this dev in the up state too. */
+ for (i = 0; i < VLAN_GROUP_ARRAY_LEN; i++) {
+ vlandev = grp->vlan_devices[i];
+ if (!vlandev)
+ continue;
+
+ flgs = vlandev->flags;
+ if (flgs & IFF_UP)
+ continue;
+
+ dev_change_flags(vlandev, flgs | IFF_UP);
+ }
+ break;
+
+ case NETDEV_UNREGISTER:
+ /* Delete all VLANs for this dev. */
+ for (i = 0; i < VLAN_GROUP_ARRAY_LEN; i++) {
+ int ret;
+
+ vlandev = grp->vlan_devices[i];
+ if (!vlandev)
+ continue;
+
+ ret = unregister_vlan_dev(dev,
+ VLAN_DEV_INFO(vlandev)->vlan_id);
+
+ unregister_netdevice(vlandev);
+
+ /* Group was destroyed? */
+ if (ret == 1)
+ break;
+ }
+ break;
+ };
+
+out:
+ return NOTIFY_DONE;
+}
+
+/*
+ * VLAN IOCTL handler.
+ * o execute requested action or pass command to the device driver
+ * arg is really a struct vlan_ioctl_args __user *.
+ */
+static int vlan_ioctl_handler(void __user *arg)
+{
+ int err = 0;
+ unsigned short vid = 0;
+ struct vlan_ioctl_args args;
+
+ if (copy_from_user(&args, arg, sizeof(struct vlan_ioctl_args)))
+ return -EFAULT;
+
+ /* Null terminate this sucker, just in case. */
+ args.device1[23] = 0;
+ args.u.device2[23] = 0;
+
+#ifdef VLAN_DEBUG
+ printk(VLAN_DBG "%s: args.cmd: %x\n", __FUNCTION__, args.cmd);
+#endif
+
+ switch (args.cmd) {
+ case SET_VLAN_INGRESS_PRIORITY_CMD:
+ if (!capable(CAP_NET_ADMIN))
+ return -EPERM;
+ err = vlan_dev_set_ingress_priority(args.device1,
+ args.u.skb_priority,
+ args.vlan_qos);
+ break;
+
+ case SET_VLAN_EGRESS_PRIORITY_CMD:
+ if (!capable(CAP_NET_ADMIN))
+ return -EPERM;
+ err = vlan_dev_set_egress_priority(args.device1,
+ args.u.skb_priority,
+ args.vlan_qos);
+ break;
+
+ case SET_VLAN_FLAG_CMD:
+ if (!capable(CAP_NET_ADMIN))
+ return -EPERM;
+ err = vlan_dev_set_vlan_flag(args.device1,
+ args.u.flag,
+ args.vlan_qos);
+ break;
+
+ case SET_VLAN_NAME_TYPE_CMD:
+ if (!capable(CAP_NET_ADMIN))
+ return -EPERM;
+ if ((args.u.name_type >= 0) &&
+ (args.u.name_type < VLAN_NAME_TYPE_HIGHEST)) {
+ vlan_name_type = args.u.name_type;
+ err = 0;
+ } else {
+ err = -EINVAL;
+ }
+ break;
+
+ case ADD_VLAN_CMD:
+ if (!capable(CAP_NET_ADMIN))
+ return -EPERM;
+ /* we have been given the name of the Ethernet Device we want to
+ * talk to: args.dev1 We also have the
+ * VLAN ID: args.u.VID
+ */
+ if (register_vlan_device(args.device1, args.u.VID)) {
+ err = 0;
+ } else {
+ err = -EINVAL;
+ }
+ break;
+
+ case DEL_VLAN_CMD:
+ if (!capable(CAP_NET_ADMIN))
+ return -EPERM;
+ /* Here, the args.dev1 is the actual VLAN we want
+ * to get rid of.
+ */
+ err = unregister_vlan_device(args.device1);
+ break;
+
+ case GET_VLAN_INGRESS_PRIORITY_CMD:
+ /* TODO: Implement
+ err = vlan_dev_get_ingress_priority(args);
+ if (copy_to_user((void*)arg, &args,
+ sizeof(struct vlan_ioctl_args))) {
+ err = -EFAULT;
+ }
+ */
+ err = -EINVAL;
+ break;
+ case GET_VLAN_EGRESS_PRIORITY_CMD:
+ /* TODO: Implement
+ err = vlan_dev_get_egress_priority(args.device1, &(args.args);
+ if (copy_to_user((void*)arg, &args,
+ sizeof(struct vlan_ioctl_args))) {
+ err = -EFAULT;
+ }
+ */
+ err = -EINVAL;
+ break;
+ case GET_VLAN_REALDEV_NAME_CMD:
+ err = vlan_dev_get_realdev_name(args.device1, args.u.device2);
+ if (copy_to_user(arg, &args,
+ sizeof(struct vlan_ioctl_args))) {
+ err = -EFAULT;
+ }
+ break;
+
+ case GET_VLAN_VID_CMD:
+ err = vlan_dev_get_vid(args.device1, &vid);
+ args.u.VID = vid;
+ if (copy_to_user(arg, &args,
+ sizeof(struct vlan_ioctl_args))) {
+ err = -EFAULT;
+ }
+ break;
+
+ default:
+ /* pass on to underlying device instead?? */
+ printk(VLAN_DBG "%s: Unknown VLAN CMD: %x \n",
+ __FUNCTION__, args.cmd);
+ return -EINVAL;
+ };
+
+ return err;
+}
+
+MODULE_LICENSE("GPL");
+MODULE_VERSION(DRV_VERSION);
diff --git a/net/8021q/vlan.h b/net/8021q/vlan.h
new file mode 100644
index 00000000000..508b1fa1454
--- /dev/null
+++ b/net/8021q/vlan.h
@@ -0,0 +1,72 @@
+#ifndef __BEN_VLAN_802_1Q_INC__
+#define __BEN_VLAN_802_1Q_INC__
+
+#include <linux/if_vlan.h>
+
+/* Uncomment this if you want debug traces to be shown. */
+/* #define VLAN_DEBUG */
+
+#define VLAN_ERR KERN_ERR
+#define VLAN_INF KERN_INFO
+#define VLAN_DBG KERN_ALERT /* change these... to debug, having a hard time
+ * changing the log level at run-time..for some reason.
+ */
+
+/*
+
+These I use for memory debugging. I feared a leak at one time, but
+I never found it..and the problem seems to have dissappeared. Still,
+I'll bet they might prove useful again... --Ben
+
+
+#define VLAN_MEM_DBG(x, y, z) printk(VLAN_DBG "%s: " x, __FUNCTION__, y, z);
+#define VLAN_FMEM_DBG(x, y) printk(VLAN_DBG "%s: " x, __FUNCTION__, y);
+*/
+
+/* This way they don't do anything! */
+#define VLAN_MEM_DBG(x, y, z)
+#define VLAN_FMEM_DBG(x, y)
+
+
+extern unsigned short vlan_name_type;
+
+#define VLAN_GRP_HASH_SHIFT 5
+#define VLAN_GRP_HASH_SIZE (1 << VLAN_GRP_HASH_SHIFT)
+#define VLAN_GRP_HASH_MASK (VLAN_GRP_HASH_SIZE - 1)
+
+/* Find a VLAN device by the MAC address of its Ethernet device, and
+ * it's VLAN ID. The default configuration is to have VLAN's scope
+ * to be box-wide, so the MAC will be ignored. The mac will only be
+ * looked at if we are configured to have a separate set of VLANs per
+ * each MAC addressable interface. Note that this latter option does
+ * NOT follow the spec for VLANs, but may be useful for doing very
+ * large quantities of VLAN MUX/DEMUX onto FrameRelay or ATM PVCs.
+ *
+ * Must be invoked with rcu_read_lock (ie preempt disabled)
+ * or with RTNL.
+ */
+struct net_device *__find_vlan_dev(struct net_device* real_dev,
+ unsigned short VID); /* vlan.c */
+
+/* found in vlan_dev.c */
+int vlan_dev_rebuild_header(struct sk_buff *skb);
+int vlan_skb_recv(struct sk_buff *skb, struct net_device *dev,
+ struct packet_type* ptype);
+int vlan_dev_hard_header(struct sk_buff *skb, struct net_device *dev,
+ unsigned short type, void *daddr, void *saddr,
+ unsigned len);
+int vlan_dev_hard_start_xmit(struct sk_buff *skb, struct net_device *dev);
+int vlan_dev_hwaccel_hard_start_xmit(struct sk_buff *skb, struct net_device *dev);
+int vlan_dev_change_mtu(struct net_device *dev, int new_mtu);
+int vlan_dev_set_mac_address(struct net_device *dev, void* addr);
+int vlan_dev_open(struct net_device* dev);
+int vlan_dev_stop(struct net_device* dev);
+int vlan_dev_ioctl(struct net_device* dev, struct ifreq *ifr, int cmd);
+int vlan_dev_set_ingress_priority(char* dev_name, __u32 skb_prio, short vlan_prio);
+int vlan_dev_set_egress_priority(char* dev_name, __u32 skb_prio, short vlan_prio);
+int vlan_dev_set_vlan_flag(char* dev_name, __u32 flag, short flag_val);
+int vlan_dev_get_realdev_name(const char* dev_name, char* result);
+int vlan_dev_get_vid(const char* dev_name, unsigned short* result);
+void vlan_dev_set_multicast_list(struct net_device *vlan_dev);
+
+#endif /* !(__BEN_VLAN_802_1Q_INC__) */
diff --git a/net/8021q/vlan_dev.c b/net/8021q/vlan_dev.c
new file mode 100644
index 00000000000..49c48741351
--- /dev/null
+++ b/net/8021q/vlan_dev.c
@@ -0,0 +1,890 @@
+/* -*- linux-c -*-
+ * INET 802.1Q VLAN
+ * Ethernet-type device handling.
+ *
+ * Authors: Ben Greear <greearb@candelatech.com>
+ * Please send support related email to: vlan@scry.wanfear.com
+ * VLAN Home Page: http://www.candelatech.com/~greear/vlan.html
+ *
+ * Fixes: Mar 22 2001: Martin Bokaemper <mbokaemper@unispherenetworks.com>
+ * - reset skb->pkt_type on incoming packets when MAC was changed
+ * - see that changed MAC is saddr for outgoing packets
+ * Oct 20, 2001: Ard van Breeman:
+ * - Fix MC-list, finally.
+ * - Flush MC-list on VLAN destroy.
+ *
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/module.h>
+#include <linux/mm.h>
+#include <linux/in.h>
+#include <linux/init.h>
+#include <asm/uaccess.h> /* for copy_from_user */
+#include <linux/skbuff.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <net/datalink.h>
+#include <net/p8022.h>
+#include <net/arp.h>
+
+#include "vlan.h"
+#include "vlanproc.h"
+#include <linux/if_vlan.h>
+#include <net/ip.h>
+
+/*
+ * Rebuild the Ethernet MAC header. This is called after an ARP
+ * (or in future other address resolution) has completed on this
+ * sk_buff. We now let ARP fill in the other fields.
+ *
+ * This routine CANNOT use cached dst->neigh!
+ * Really, it is used only when dst->neigh is wrong.
+ *
+ * TODO: This needs a checkup, I'm ignorant here. --BLG
+ */
+int vlan_dev_rebuild_header(struct sk_buff *skb)
+{
+ struct net_device *dev = skb->dev;
+ struct vlan_ethhdr *veth = (struct vlan_ethhdr *)(skb->data);
+
+ switch (veth->h_vlan_encapsulated_proto) {
+#ifdef CONFIG_INET
+ case __constant_htons(ETH_P_IP):
+
+ /* TODO: Confirm this will work with VLAN headers... */
+ return arp_find(veth->h_dest, skb);
+#endif
+ default:
+ printk(VLAN_DBG
+ "%s: unable to resolve type %X addresses.\n",
+ dev->name, (int)veth->h_vlan_encapsulated_proto);
+
+ memcpy(veth->h_source, dev->dev_addr, ETH_ALEN);
+ break;
+ };
+
+ return 0;
+}
+
+static inline struct sk_buff *vlan_check_reorder_header(struct sk_buff *skb)
+{
+ if (VLAN_DEV_INFO(skb->dev)->flags & 1) {
+ if (skb_shared(skb) || skb_cloned(skb)) {
+ struct sk_buff *nskb = skb_copy(skb, GFP_ATOMIC);
+ kfree_skb(skb);
+ skb = nskb;
+ }
+ if (skb) {
+ /* Lifted from Gleb's VLAN code... */
+ memmove(skb->data - ETH_HLEN,
+ skb->data - VLAN_ETH_HLEN, 12);
+ skb->mac.raw += VLAN_HLEN;
+ }
+ }
+
+ return skb;
+}
+
+/*
+ * Determine the packet's protocol ID. The rule here is that we
+ * assume 802.3 if the type field is short enough to be a length.
+ * This is normal practice and works for any 'now in use' protocol.
+ *
+ * Also, at this point we assume that we ARE dealing exclusively with
+ * VLAN packets, or packets that should be made into VLAN packets based
+ * on a default VLAN ID.
+ *
+ * NOTE: Should be similar to ethernet/eth.c.
+ *
+ * SANITY NOTE: This method is called when a packet is moving up the stack
+ * towards userland. To get here, it would have already passed
+ * through the ethernet/eth.c eth_type_trans() method.
+ * SANITY NOTE 2: We are referencing to the VLAN_HDR frields, which MAY be
+ * stored UNALIGNED in the memory. RISC systems don't like
+ * such cases very much...
+ * SANITY NOTE 2a: According to Dave Miller & Alexey, it will always be aligned,
+ * so there doesn't need to be any of the unaligned stuff. It has
+ * been commented out now... --Ben
+ *
+ */
+int vlan_skb_recv(struct sk_buff *skb, struct net_device *dev,
+ struct packet_type* ptype)
+{
+ unsigned char *rawp = NULL;
+ struct vlan_hdr *vhdr = (struct vlan_hdr *)(skb->data);
+ unsigned short vid;
+ struct net_device_stats *stats;
+ unsigned short vlan_TCI;
+ unsigned short proto;
+
+ /* vlan_TCI = ntohs(get_unaligned(&vhdr->h_vlan_TCI)); */
+ vlan_TCI = ntohs(vhdr->h_vlan_TCI);
+
+ vid = (vlan_TCI & VLAN_VID_MASK);
+
+#ifdef VLAN_DEBUG
+ printk(VLAN_DBG "%s: skb: %p vlan_id: %hx\n",
+ __FUNCTION__, skb, vid);
+#endif
+
+ /* Ok, we will find the correct VLAN device, strip the header,
+ * and then go on as usual.
+ */
+
+ /* We have 12 bits of vlan ID.
+ *
+ * We must not drop allow preempt until we hold a
+ * reference to the device (netif_rx does that) or we
+ * fail.
+ */
+
+ rcu_read_lock();
+ skb->dev = __find_vlan_dev(dev, vid);
+ if (!skb->dev) {
+ rcu_read_unlock();
+
+#ifdef VLAN_DEBUG
+ printk(VLAN_DBG "%s: ERROR: No net_device for VID: %i on dev: %s [%i]\n",
+ __FUNCTION__, (unsigned int)(vid), dev->name, dev->ifindex);
+#endif
+ kfree_skb(skb);
+ return -1;
+ }
+
+ skb->dev->last_rx = jiffies;
+
+ /* Bump the rx counters for the VLAN device. */
+ stats = vlan_dev_get_stats(skb->dev);
+ stats->rx_packets++;
+ stats->rx_bytes += skb->len;
+
+ skb_pull(skb, VLAN_HLEN); /* take off the VLAN header (4 bytes currently) */
+
+ /* Ok, lets check to make sure the device (dev) we
+ * came in on is what this VLAN is attached to.
+ */
+
+ if (dev != VLAN_DEV_INFO(skb->dev)->real_dev) {
+ rcu_read_unlock();
+
+#ifdef VLAN_DEBUG
+ printk(VLAN_DBG "%s: dropping skb: %p because came in on wrong device, dev: %s real_dev: %s, skb_dev: %s\n",
+ __FUNCTION__, skb, dev->name,
+ VLAN_DEV_INFO(skb->dev)->real_dev->name,
+ skb->dev->name);
+#endif
+ kfree_skb(skb);
+ stats->rx_errors++;
+ return -1;
+ }
+
+ /*
+ * Deal with ingress priority mapping.
+ */
+ skb->priority = vlan_get_ingress_priority(skb->dev, ntohs(vhdr->h_vlan_TCI));
+
+#ifdef VLAN_DEBUG
+ printk(VLAN_DBG "%s: priority: %lu for TCI: %hu (hbo)\n",
+ __FUNCTION__, (unsigned long)(skb->priority),
+ ntohs(vhdr->h_vlan_TCI));
+#endif
+
+ /* The ethernet driver already did the pkt_type calculations
+ * for us...
+ */
+ switch (skb->pkt_type) {
+ case PACKET_BROADCAST: /* Yeah, stats collect these together.. */
+ // stats->broadcast ++; // no such counter :-(
+ break;
+
+ case PACKET_MULTICAST:
+ stats->multicast++;
+ break;
+
+ case PACKET_OTHERHOST:
+ /* Our lower layer thinks this is not local, let's make sure.
+ * This allows the VLAN to have a different MAC than the underlying
+ * device, and still route correctly.
+ */
+ if (memcmp(eth_hdr(skb)->h_dest, skb->dev->dev_addr, ETH_ALEN) == 0) {
+ /* It is for our (changed) MAC-address! */
+ skb->pkt_type = PACKET_HOST;
+ }
+ break;
+ default:
+ break;
+ };
+
+ /* Was a VLAN packet, grab the encapsulated protocol, which the layer
+ * three protocols care about.
+ */
+ /* proto = get_unaligned(&vhdr->h_vlan_encapsulated_proto); */
+ proto = vhdr->h_vlan_encapsulated_proto;
+
+ skb->protocol = proto;
+ if (ntohs(proto) >= 1536) {
+ /* place it back on the queue to be handled by
+ * true layer 3 protocols.
+ */
+
+ /* See if we are configured to re-write the VLAN header
+ * to make it look like ethernet...
+ */
+ skb = vlan_check_reorder_header(skb);
+
+ /* Can be null if skb-clone fails when re-ordering */
+ if (skb) {
+ netif_rx(skb);
+ } else {
+ /* TODO: Add a more specific counter here. */
+ stats->rx_errors++;
+ }
+ rcu_read_unlock();
+ return 0;
+ }
+
+ rawp = skb->data;
+
+ /*
+ * This is a magic hack to spot IPX packets. Older Novell breaks
+ * the protocol design and runs IPX over 802.3 without an 802.2 LLC
+ * layer. We look for FFFF which isn't a used 802.2 SSAP/DSAP. This
+ * won't work for fault tolerant netware but does for the rest.
+ */
+ if (*(unsigned short *)rawp == 0xFFFF) {
+ skb->protocol = __constant_htons(ETH_P_802_3);
+ /* place it back on the queue to be handled by true layer 3 protocols.
+ */
+
+ /* See if we are configured to re-write the VLAN header
+ * to make it look like ethernet...
+ */
+ skb = vlan_check_reorder_header(skb);
+
+ /* Can be null if skb-clone fails when re-ordering */
+ if (skb) {
+ netif_rx(skb);
+ } else {
+ /* TODO: Add a more specific counter here. */
+ stats->rx_errors++;
+ }
+ rcu_read_unlock();
+ return 0;
+ }
+
+ /*
+ * Real 802.2 LLC
+ */
+ skb->protocol = __constant_htons(ETH_P_802_2);
+ /* place it back on the queue to be handled by upper layer protocols.
+ */
+
+ /* See if we are configured to re-write the VLAN header
+ * to make it look like ethernet...
+ */
+ skb = vlan_check_reorder_header(skb);
+
+ /* Can be null if skb-clone fails when re-ordering */
+ if (skb) {
+ netif_rx(skb);
+ } else {
+ /* TODO: Add a more specific counter here. */
+ stats->rx_errors++;
+ }
+ rcu_read_unlock();
+ return 0;
+}
+
+static inline unsigned short vlan_dev_get_egress_qos_mask(struct net_device* dev,
+ struct sk_buff* skb)
+{
+ struct vlan_priority_tci_mapping *mp =
+ VLAN_DEV_INFO(dev)->egress_priority_map[(skb->priority & 0xF)];
+
+ while (mp) {
+ if (mp->priority == skb->priority) {
+ return mp->vlan_qos; /* This should already be shifted to mask
+ * correctly with the VLAN's TCI
+ */
+ }
+ mp = mp->next;
+ }
+ return 0;
+}
+
+/*
+ * Create the VLAN header for an arbitrary protocol layer
+ *
+ * saddr=NULL means use device source address
+ * daddr=NULL means leave destination address (eg unresolved arp)
+ *
+ * This is called when the SKB is moving down the stack towards the
+ * physical devices.
+ */
+int vlan_dev_hard_header(struct sk_buff *skb, struct net_device *dev,
+ unsigned short type, void *daddr, void *saddr,
+ unsigned len)
+{
+ struct vlan_hdr *vhdr;
+ unsigned short veth_TCI = 0;
+ int rc = 0;
+ int build_vlan_header = 0;
+ struct net_device *vdev = dev; /* save this for the bottom of the method */
+
+#ifdef VLAN_DEBUG
+ printk(VLAN_DBG "%s: skb: %p type: %hx len: %x vlan_id: %hx, daddr: %p\n",
+ __FUNCTION__, skb, type, len, VLAN_DEV_INFO(dev)->vlan_id, daddr);
+#endif
+
+ /* build vlan header only if re_order_header flag is NOT set. This
+ * fixes some programs that get confused when they see a VLAN device
+ * sending a frame that is VLAN encoded (the consensus is that the VLAN
+ * device should look completely like an Ethernet device when the
+ * REORDER_HEADER flag is set) The drawback to this is some extra
+ * header shuffling in the hard_start_xmit. Users can turn off this
+ * REORDER behaviour with the vconfig tool.
+ */
+ build_vlan_header = ((VLAN_DEV_INFO(dev)->flags & 1) == 0);
+
+ if (build_vlan_header) {
+ vhdr = (struct vlan_hdr *) skb_push(skb, VLAN_HLEN);
+
+ /* build the four bytes that make this a VLAN header. */
+
+ /* Now, construct the second two bytes. This field looks something
+ * like:
+ * usr_priority: 3 bits (high bits)
+ * CFI 1 bit
+ * VLAN ID 12 bits (low bits)
+ *
+ */
+ veth_TCI = VLAN_DEV_INFO(dev)->vlan_id;
+ veth_TCI |= vlan_dev_get_egress_qos_mask(dev, skb);
+
+ vhdr->h_vlan_TCI = htons(veth_TCI);
+
+ /*
+ * Set the protocol type.
+ * For a packet of type ETH_P_802_3 we put the length in here instead.
+ * It is up to the 802.2 layer to carry protocol information.
+ */
+
+ if (type != ETH_P_802_3) {
+ vhdr->h_vlan_encapsulated_proto = htons(type);
+ } else {
+ vhdr->h_vlan_encapsulated_proto = htons(len);
+ }
+ }
+
+ /* Before delegating work to the lower layer, enter our MAC-address */
+ if (saddr == NULL)
+ saddr = dev->dev_addr;
+
+ dev = VLAN_DEV_INFO(dev)->real_dev;
+
+ /* MPLS can send us skbuffs w/out enough space. This check will grow the
+ * skb if it doesn't have enough headroom. Not a beautiful solution, so
+ * I'll tick a counter so that users can know it's happening... If they
+ * care...
+ */
+
+ /* NOTE: This may still break if the underlying device is not the final
+ * device (and thus there are more headers to add...) It should work for
+ * good-ole-ethernet though.
+ */
+ if (skb_headroom(skb) < dev->hard_header_len) {
+ struct sk_buff *sk_tmp = skb;
+ skb = skb_realloc_headroom(sk_tmp, dev->hard_header_len);
+ kfree_skb(sk_tmp);
+ if (skb == NULL) {
+ struct net_device_stats *stats = vlan_dev_get_stats(vdev);
+ stats->tx_dropped++;
+ return -ENOMEM;
+ }
+ VLAN_DEV_INFO(vdev)->cnt_inc_headroom_on_tx++;
+#ifdef VLAN_DEBUG
+ printk(VLAN_DBG "%s: %s: had to grow skb.\n", __FUNCTION__, vdev->name);
+#endif
+ }
+
+ if (build_vlan_header) {
+ /* Now make the underlying real hard header */
+ rc = dev->hard_header(skb, dev, ETH_P_8021Q, daddr, saddr, len + VLAN_HLEN);
+
+ if (rc > 0) {
+ rc += VLAN_HLEN;
+ } else if (rc < 0) {
+ rc -= VLAN_HLEN;
+ }
+ } else {
+ /* If here, then we'll just make a normal looking ethernet frame,
+ * but, the hard_start_xmit method will insert the tag (it has to
+ * be able to do this for bridged and other skbs that don't come
+ * down the protocol stack in an orderly manner.
+ */
+ rc = dev->hard_header(skb, dev, type, daddr, saddr, len);
+ }
+
+ return rc;
+}
+
+int vlan_dev_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
+{
+ struct net_device_stats *stats = vlan_dev_get_stats(dev);
+ struct vlan_ethhdr *veth = (struct vlan_ethhdr *)(skb->data);
+
+ /* Handle non-VLAN frames if they are sent to us, for example by DHCP.
+ *
+ * NOTE: THIS ASSUMES DIX ETHERNET, SPECIFICALLY NOT SUPPORTING
+ * OTHER THINGS LIKE FDDI/TokenRing/802.3 SNAPs...
+ */
+
+ if (veth->h_vlan_proto != __constant_htons(ETH_P_8021Q)) {
+ int orig_headroom = skb_headroom(skb);
+ unsigned short veth_TCI;
+
+ /* This is not a VLAN frame...but we can fix that! */
+ VLAN_DEV_INFO(dev)->cnt_encap_on_xmit++;
+
+#ifdef VLAN_DEBUG
+ printk(VLAN_DBG "%s: proto to encap: 0x%hx (hbo)\n",
+ __FUNCTION__, htons(veth->h_vlan_proto));
+#endif
+ /* Construct the second two bytes. This field looks something
+ * like:
+ * usr_priority: 3 bits (high bits)
+ * CFI 1 bit
+ * VLAN ID 12 bits (low bits)
+ */
+ veth_TCI = VLAN_DEV_INFO(dev)->vlan_id;
+ veth_TCI |= vlan_dev_get_egress_qos_mask(dev, skb);
+
+ skb = __vlan_put_tag(skb, veth_TCI);
+ if (!skb) {
+ stats->tx_dropped++;
+ return 0;
+ }
+
+ if (orig_headroom < VLAN_HLEN) {
+ VLAN_DEV_INFO(dev)->cnt_inc_headroom_on_tx++;
+ }
+ }
+
+#ifdef VLAN_DEBUG
+ printk(VLAN_DBG "%s: about to send skb: %p to dev: %s\n",
+ __FUNCTION__, skb, skb->dev->name);
+ printk(VLAN_DBG " %2hx.%2hx.%2hx.%2xh.%2hx.%2hx %2hx.%2hx.%2hx.%2hx.%2hx.%2hx %4hx %4hx %4hx\n",
+ veth->h_dest[0], veth->h_dest[1], veth->h_dest[2], veth->h_dest[3], veth->h_dest[4], veth->h_dest[5],
+ veth->h_source[0], veth->h_source[1], veth->h_source[2], veth->h_source[3], veth->h_source[4], veth->h_source[5],
+ veth->h_vlan_proto, veth->h_vlan_TCI, veth->h_vlan_encapsulated_proto);
+#endif
+
+ stats->tx_packets++; /* for statics only */
+ stats->tx_bytes += skb->len;
+
+ skb->dev = VLAN_DEV_INFO(dev)->real_dev;
+ dev_queue_xmit(skb);
+
+ return 0;
+}
+
+int vlan_dev_hwaccel_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
+{
+ struct net_device_stats *stats = vlan_dev_get_stats(dev);
+ unsigned short veth_TCI;
+
+ /* Construct the second two bytes. This field looks something
+ * like:
+ * usr_priority: 3 bits (high bits)
+ * CFI 1 bit
+ * VLAN ID 12 bits (low bits)
+ */
+ veth_TCI = VLAN_DEV_INFO(dev)->vlan_id;
+ veth_TCI |= vlan_dev_get_egress_qos_mask(dev, skb);
+ skb = __vlan_hwaccel_put_tag(skb, veth_TCI);
+
+ stats->tx_packets++;
+ stats->tx_bytes += skb->len;
+
+ skb->dev = VLAN_DEV_INFO(dev)->real_dev;
+ dev_queue_xmit(skb);
+
+ return 0;
+}
+
+int vlan_dev_change_mtu(struct net_device *dev, int new_mtu)
+{
+ /* TODO: gotta make sure the underlying layer can handle it,
+ * maybe an IFF_VLAN_CAPABLE flag for devices?
+ */
+ if (VLAN_DEV_INFO(dev)->real_dev->mtu < new_mtu)
+ return -ERANGE;
+
+ dev->mtu = new_mtu;
+
+ return 0;
+}
+
+int vlan_dev_set_ingress_priority(char *dev_name, __u32 skb_prio, short vlan_prio)
+{
+ struct net_device *dev = dev_get_by_name(dev_name);
+
+ if (dev) {
+ if (dev->priv_flags & IFF_802_1Q_VLAN) {
+ /* see if a priority mapping exists.. */
+ VLAN_DEV_INFO(dev)->ingress_priority_map[vlan_prio & 0x7] = skb_prio;
+ dev_put(dev);
+ return 0;
+ }
+
+ dev_put(dev);
+ }
+ return -EINVAL;
+}
+
+int vlan_dev_set_egress_priority(char *dev_name, __u32 skb_prio, short vlan_prio)
+{
+ struct net_device *dev = dev_get_by_name(dev_name);
+ struct vlan_priority_tci_mapping *mp = NULL;
+ struct vlan_priority_tci_mapping *np;
+
+ if (dev) {
+ if (dev->priv_flags & IFF_802_1Q_VLAN) {
+ /* See if a priority mapping exists.. */
+ mp = VLAN_DEV_INFO(dev)->egress_priority_map[skb_prio & 0xF];
+ while (mp) {
+ if (mp->priority == skb_prio) {
+ mp->vlan_qos = ((vlan_prio << 13) & 0xE000);
+ dev_put(dev);
+ return 0;
+ }
+ mp = mp->next;
+ }
+
+ /* Create a new mapping then. */
+ mp = VLAN_DEV_INFO(dev)->egress_priority_map[skb_prio & 0xF];
+ np = kmalloc(sizeof(struct vlan_priority_tci_mapping), GFP_KERNEL);
+ if (np) {
+ np->next = mp;
+ np->priority = skb_prio;
+ np->vlan_qos = ((vlan_prio << 13) & 0xE000);
+ VLAN_DEV_INFO(dev)->egress_priority_map[skb_prio & 0xF] = np;
+ dev_put(dev);
+ return 0;
+ } else {
+ dev_put(dev);
+ return -ENOBUFS;
+ }
+ }
+ dev_put(dev);
+ }
+ return -EINVAL;
+}
+
+/* Flags are defined in the vlan_dev_info class in include/linux/if_vlan.h file. */
+int vlan_dev_set_vlan_flag(char *dev_name, __u32 flag, short flag_val)
+{
+ struct net_device *dev = dev_get_by_name(dev_name);
+
+ if (dev) {
+ if (dev->priv_flags & IFF_802_1Q_VLAN) {
+ /* verify flag is supported */
+ if (flag == 1) {
+ if (flag_val) {
+ VLAN_DEV_INFO(dev)->flags |= 1;
+ } else {
+ VLAN_DEV_INFO(dev)->flags &= ~1;
+ }
+ dev_put(dev);
+ return 0;
+ } else {
+ printk(KERN_ERR "%s: flag %i is not valid.\n",
+ __FUNCTION__, (int)(flag));
+ dev_put(dev);
+ return -EINVAL;
+ }
+ } else {
+ printk(KERN_ERR
+ "%s: %s is not a vlan device, priv_flags: %hX.\n",
+ __FUNCTION__, dev->name, dev->priv_flags);
+ dev_put(dev);
+ }
+ } else {
+ printk(KERN_ERR "%s: Could not find device: %s\n",
+ __FUNCTION__, dev_name);
+ }
+
+ return -EINVAL;
+}
+
+
+int vlan_dev_get_realdev_name(const char *dev_name, char* result)
+{
+ struct net_device *dev = dev_get_by_name(dev_name);
+ int rv = 0;
+ if (dev) {
+ if (dev->priv_flags & IFF_802_1Q_VLAN) {
+ strncpy(result, VLAN_DEV_INFO(dev)->real_dev->name, 23);
+ rv = 0;
+ } else {
+ rv = -EINVAL;
+ }
+ dev_put(dev);
+ } else {
+ rv = -ENODEV;
+ }
+ return rv;
+}
+
+int vlan_dev_get_vid(const char *dev_name, unsigned short* result)
+{
+ struct net_device *dev = dev_get_by_name(dev_name);
+ int rv = 0;
+ if (dev) {
+ if (dev->priv_flags & IFF_802_1Q_VLAN) {
+ *result = VLAN_DEV_INFO(dev)->vlan_id;
+ rv = 0;
+ } else {
+ rv = -EINVAL;
+ }
+ dev_put(dev);
+ } else {
+ rv = -ENODEV;
+ }
+ return rv;
+}
+
+
+int vlan_dev_set_mac_address(struct net_device *dev, void *addr_struct_p)
+{
+ struct sockaddr *addr = (struct sockaddr *)(addr_struct_p);
+ int i;
+
+ if (netif_running(dev))
+ return -EBUSY;
+
+ memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
+
+ printk("%s: Setting MAC address to ", dev->name);
+ for (i = 0; i < 6; i++)
+ printk(" %2.2x", dev->dev_addr[i]);
+ printk(".\n");
+
+ if (memcmp(VLAN_DEV_INFO(dev)->real_dev->dev_addr,
+ dev->dev_addr,
+ dev->addr_len) != 0) {
+ if (!(VLAN_DEV_INFO(dev)->real_dev->flags & IFF_PROMISC)) {
+ int flgs = VLAN_DEV_INFO(dev)->real_dev->flags;
+
+ /* Increment our in-use promiscuity counter */
+ dev_set_promiscuity(VLAN_DEV_INFO(dev)->real_dev, 1);
+
+ /* Make PROMISC visible to the user. */
+ flgs |= IFF_PROMISC;
+ printk("VLAN (%s): Setting underlying device (%s) to promiscious mode.\n",
+ dev->name, VLAN_DEV_INFO(dev)->real_dev->name);
+ dev_change_flags(VLAN_DEV_INFO(dev)->real_dev, flgs);
+ }
+ } else {
+ printk("VLAN (%s): Underlying device (%s) has same MAC, not checking promiscious mode.\n",
+ dev->name, VLAN_DEV_INFO(dev)->real_dev->name);
+ }
+
+ return 0;
+}
+
+static inline int vlan_dmi_equals(struct dev_mc_list *dmi1,
+ struct dev_mc_list *dmi2)
+{
+ return ((dmi1->dmi_addrlen == dmi2->dmi_addrlen) &&
+ (memcmp(dmi1->dmi_addr, dmi2->dmi_addr, dmi1->dmi_addrlen) == 0));
+}
+
+/** dmi is a single entry into a dev_mc_list, a single node. mc_list is
+ * an entire list, and we'll iterate through it.
+ */
+static int vlan_should_add_mc(struct dev_mc_list *dmi, struct dev_mc_list *mc_list)
+{
+ struct dev_mc_list *idmi;
+
+ for (idmi = mc_list; idmi != NULL; ) {
+ if (vlan_dmi_equals(dmi, idmi)) {
+ if (dmi->dmi_users > idmi->dmi_users)
+ return 1;
+ else
+ return 0;
+ } else {
+ idmi = idmi->next;
+ }
+ }
+
+ return 1;
+}
+
+static inline void vlan_destroy_mc_list(struct dev_mc_list *mc_list)
+{
+ struct dev_mc_list *dmi = mc_list;
+ struct dev_mc_list *next;
+
+ while(dmi) {
+ next = dmi->next;
+ kfree(dmi);
+ dmi = next;
+ }
+}
+
+static void vlan_copy_mc_list(struct dev_mc_list *mc_list, struct vlan_dev_info *vlan_info)
+{
+ struct dev_mc_list *dmi, *new_dmi;
+
+ vlan_destroy_mc_list(vlan_info->old_mc_list);
+ vlan_info->old_mc_list = NULL;
+
+ for (dmi = mc_list; dmi != NULL; dmi = dmi->next) {
+ new_dmi = kmalloc(sizeof(*new_dmi), GFP_ATOMIC);
+ if (new_dmi == NULL) {
+ printk(KERN_ERR "vlan: cannot allocate memory. "
+ "Multicast may not work properly from now.\n");
+ return;
+ }
+
+ /* Copy whole structure, then make new 'next' pointer */
+ *new_dmi = *dmi;
+ new_dmi->next = vlan_info->old_mc_list;
+ vlan_info->old_mc_list = new_dmi;
+ }
+}
+
+static void vlan_flush_mc_list(struct net_device *dev)
+{
+ struct dev_mc_list *dmi = dev->mc_list;
+
+ while (dmi) {
+ printk(KERN_DEBUG "%s: del %.2x:%.2x:%.2x:%.2x:%.2x:%.2x mcast address from vlan interface\n",
+ dev->name,
+ dmi->dmi_addr[0],
+ dmi->dmi_addr[1],
+ dmi->dmi_addr[2],
+ dmi->dmi_addr[3],
+ dmi->dmi_addr[4],
+ dmi->dmi_addr[5]);
+ dev_mc_delete(dev, dmi->dmi_addr, dmi->dmi_addrlen, 0);
+ dmi = dev->mc_list;
+ }
+
+ /* dev->mc_list is NULL by the time we get here. */
+ vlan_destroy_mc_list(VLAN_DEV_INFO(dev)->old_mc_list);
+ VLAN_DEV_INFO(dev)->old_mc_list = NULL;
+}
+
+int vlan_dev_open(struct net_device *dev)
+{
+ if (!(VLAN_DEV_INFO(dev)->real_dev->flags & IFF_UP))
+ return -ENETDOWN;
+
+ return 0;
+}
+
+int vlan_dev_stop(struct net_device *dev)
+{
+ vlan_flush_mc_list(dev);
+ return 0;
+}
+
+int vlan_dev_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
+{
+ struct net_device *real_dev = VLAN_DEV_INFO(dev)->real_dev;
+ struct ifreq ifrr;
+ int err = -EOPNOTSUPP;
+
+ strncpy(ifrr.ifr_name, real_dev->name, IFNAMSIZ);
+ ifrr.ifr_ifru = ifr->ifr_ifru;
+
+ switch(cmd) {
+ case SIOCGMIIPHY:
+ case SIOCGMIIREG:
+ case SIOCSMIIREG:
+ if (real_dev->do_ioctl && netif_device_present(real_dev))
+ err = real_dev->do_ioctl(real_dev, &ifrr, cmd);
+ break;
+
+ case SIOCETHTOOL:
+ err = dev_ethtool(&ifrr);
+ }
+
+ if (!err)
+ ifr->ifr_ifru = ifrr.ifr_ifru;
+
+ return err;
+}
+
+/** Taken from Gleb + Lennert's VLAN code, and modified... */
+void vlan_dev_set_multicast_list(struct net_device *vlan_dev)
+{
+ struct dev_mc_list *dmi;
+ struct net_device *real_dev;
+ int inc;
+
+ if (vlan_dev && (vlan_dev->priv_flags & IFF_802_1Q_VLAN)) {
+ /* Then it's a real vlan device, as far as we can tell.. */
+ real_dev = VLAN_DEV_INFO(vlan_dev)->real_dev;
+
+ /* compare the current promiscuity to the last promisc we had.. */
+ inc = vlan_dev->promiscuity - VLAN_DEV_INFO(vlan_dev)->old_promiscuity;
+ if (inc) {
+ printk(KERN_INFO "%s: dev_set_promiscuity(master, %d)\n",
+ vlan_dev->name, inc);
+ dev_set_promiscuity(real_dev, inc); /* found in dev.c */
+ VLAN_DEV_INFO(vlan_dev)->old_promiscuity = vlan_dev->promiscuity;
+ }
+
+ inc = vlan_dev->allmulti - VLAN_DEV_INFO(vlan_dev)->old_allmulti;
+ if (inc) {
+ printk(KERN_INFO "%s: dev_set_allmulti(master, %d)\n",
+ vlan_dev->name, inc);
+ dev_set_allmulti(real_dev, inc); /* dev.c */
+ VLAN_DEV_INFO(vlan_dev)->old_allmulti = vlan_dev->allmulti;
+ }
+
+ /* looking for addresses to add to master's list */
+ for (dmi = vlan_dev->mc_list; dmi != NULL; dmi = dmi->next) {
+ if (vlan_should_add_mc(dmi, VLAN_DEV_INFO(vlan_dev)->old_mc_list)) {
+ dev_mc_add(real_dev, dmi->dmi_addr, dmi->dmi_addrlen, 0);
+ printk(KERN_DEBUG "%s: add %.2x:%.2x:%.2x:%.2x:%.2x:%.2x mcast address to master interface\n",
+ vlan_dev->name,
+ dmi->dmi_addr[0],
+ dmi->dmi_addr[1],
+ dmi->dmi_addr[2],
+ dmi->dmi_addr[3],
+ dmi->dmi_addr[4],
+ dmi->dmi_addr[5]);
+ }
+ }
+
+ /* looking for addresses to delete from master's list */
+ for (dmi = VLAN_DEV_INFO(vlan_dev)->old_mc_list; dmi != NULL; dmi = dmi->next) {
+ if (vlan_should_add_mc(dmi, vlan_dev->mc_list)) {
+ /* if we think we should add it to the new list, then we should really
+ * delete it from the real list on the underlying device.
+ */
+ dev_mc_delete(real_dev, dmi->dmi_addr, dmi->dmi_addrlen, 0);
+ printk(KERN_DEBUG "%s: del %.2x:%.2x:%.2x:%.2x:%.2x:%.2x mcast address from master interface\n",
+ vlan_dev->name,
+ dmi->dmi_addr[0],
+ dmi->dmi_addr[1],
+ dmi->dmi_addr[2],
+ dmi->dmi_addr[3],
+ dmi->dmi_addr[4],
+ dmi->dmi_addr[5]);
+ }
+ }
+
+ /* save multicast list */
+ vlan_copy_mc_list(vlan_dev->mc_list, VLAN_DEV_INFO(vlan_dev));
+ }
+}
diff --git a/net/8021q/vlanproc.c b/net/8021q/vlanproc.c
new file mode 100644
index 00000000000..c32d27af0a3
--- /dev/null
+++ b/net/8021q/vlanproc.c
@@ -0,0 +1,357 @@
+/******************************************************************************
+ * vlanproc.c VLAN Module. /proc filesystem interface.
+ *
+ * This module is completely hardware-independent and provides
+ * access to the router using Linux /proc filesystem.
+ *
+ * Author: Ben Greear, <greearb@candelatech.com> coppied from wanproc.c
+ * by: Gene Kozin <genek@compuserve.com>
+ *
+ * Copyright: (c) 1998 Ben Greear
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ * ============================================================================
+ * Jan 20, 1998 Ben Greear Initial Version
+ *****************************************************************************/
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/stddef.h> /* offsetof(), etc. */
+#include <linux/errno.h> /* return codes */
+#include <linux/kernel.h>
+#include <linux/slab.h> /* kmalloc(), kfree() */
+#include <linux/mm.h> /* verify_area(), etc. */
+#include <linux/string.h> /* inline mem*, str* functions */
+#include <linux/init.h> /* __initfunc et al. */
+#include <asm/byteorder.h> /* htons(), etc. */
+#include <asm/uaccess.h> /* copy_to_user */
+#include <asm/io.h>
+#include <linux/proc_fs.h>
+#include <linux/seq_file.h>
+#include <linux/fs.h>
+#include <linux/netdevice.h>
+#include <linux/if_vlan.h>
+#include "vlanproc.h"
+#include "vlan.h"
+
+/****** Function Prototypes *************************************************/
+
+/* Methods for preparing data for reading proc entries */
+static int vlan_seq_show(struct seq_file *seq, void *v);
+static void *vlan_seq_start(struct seq_file *seq, loff_t *pos);
+static void *vlan_seq_next(struct seq_file *seq, void *v, loff_t *pos);
+static void vlan_seq_stop(struct seq_file *seq, void *);
+static int vlandev_seq_show(struct seq_file *seq, void *v);
+
+/*
+ * Global Data
+ */
+
+
+/*
+ * Names of the proc directory entries
+ */
+
+static const char name_root[] = "vlan";
+static const char name_conf[] = "config";
+
+/*
+ * Structures for interfacing with the /proc filesystem.
+ * VLAN creates its own directory /proc/net/vlan with the folowing
+ * entries:
+ * config device status/configuration
+ * <device> entry for each device
+ */
+
+/*
+ * Generic /proc/net/vlan/<file> file and inode operations
+ */
+
+static struct seq_operations vlan_seq_ops = {
+ .start = vlan_seq_start,
+ .next = vlan_seq_next,
+ .stop = vlan_seq_stop,
+ .show = vlan_seq_show,
+};
+
+static int vlan_seq_open(struct inode *inode, struct file *file)
+{
+ return seq_open(file, &vlan_seq_ops);
+}
+
+static struct file_operations vlan_fops = {
+ .owner = THIS_MODULE,
+ .open = vlan_seq_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = seq_release,
+};
+
+/*
+ * /proc/net/vlan/<device> file and inode operations
+ */
+
+static int vlandev_seq_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, vlandev_seq_show, PDE(inode)->data);
+}
+
+static struct file_operations vlandev_fops = {
+ .owner = THIS_MODULE,
+ .open = vlandev_seq_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
+
+/*
+ * Proc filesystem derectory entries.
+ */
+
+/*
+ * /proc/net/vlan
+ */
+
+static struct proc_dir_entry *proc_vlan_dir;
+
+/*
+ * /proc/net/vlan/config
+ */
+
+static struct proc_dir_entry *proc_vlan_conf;
+
+/* Strings */
+static const char *vlan_name_type_str[VLAN_NAME_TYPE_HIGHEST] = {
+ [VLAN_NAME_TYPE_RAW_PLUS_VID] = "VLAN_NAME_TYPE_RAW_PLUS_VID",
+ [VLAN_NAME_TYPE_PLUS_VID_NO_PAD] = "VLAN_NAME_TYPE_PLUS_VID_NO_PAD",
+ [VLAN_NAME_TYPE_RAW_PLUS_VID_NO_PAD]= "VLAN_NAME_TYPE_RAW_PLUS_VID_NO_PAD",
+ [VLAN_NAME_TYPE_PLUS_VID] = "VLAN_NAME_TYPE_PLUS_VID",
+};
+/*
+ * Interface functions
+ */
+
+/*
+ * Clean up /proc/net/vlan entries
+ */
+
+void vlan_proc_cleanup(void)
+{
+ if (proc_vlan_conf)
+ remove_proc_entry(name_conf, proc_vlan_dir);
+
+ if (proc_vlan_dir)
+ proc_net_remove(name_root);
+
+ /* Dynamically added entries should be cleaned up as their vlan_device
+ * is removed, so we should not have to take care of it here...
+ */
+}
+
+/*
+ * Create /proc/net/vlan entries
+ */
+
+int __init vlan_proc_init(void)
+{
+ proc_vlan_dir = proc_mkdir(name_root, proc_net);
+ if (proc_vlan_dir) {
+ proc_vlan_conf = create_proc_entry(name_conf,
+ S_IFREG|S_IRUSR|S_IWUSR,
+ proc_vlan_dir);
+ if (proc_vlan_conf) {
+ proc_vlan_conf->proc_fops = &vlan_fops;
+ return 0;
+ }
+ }
+ vlan_proc_cleanup();
+ return -ENOBUFS;
+}
+
+/*
+ * Add directory entry for VLAN device.
+ */
+
+int vlan_proc_add_dev (struct net_device *vlandev)
+{
+ struct vlan_dev_info *dev_info = VLAN_DEV_INFO(vlandev);
+
+ if (!(vlandev->priv_flags & IFF_802_1Q_VLAN)) {
+ printk(KERN_ERR
+ "ERROR: vlan_proc_add, device -:%s:- is NOT a VLAN\n",
+ vlandev->name);
+ return -EINVAL;
+ }
+
+ dev_info->dent = create_proc_entry(vlandev->name,
+ S_IFREG|S_IRUSR|S_IWUSR,
+ proc_vlan_dir);
+ if (!dev_info->dent)
+ return -ENOBUFS;
+
+ dev_info->dent->proc_fops = &vlandev_fops;
+ dev_info->dent->data = vlandev;
+
+#ifdef VLAN_DEBUG
+ printk(KERN_ERR "vlan_proc_add, device -:%s:- being added.\n",
+ vlandev->name);
+#endif
+ return 0;
+}
+
+/*
+ * Delete directory entry for VLAN device.
+ */
+int vlan_proc_rem_dev(struct net_device *vlandev)
+{
+ if (!vlandev) {
+ printk(VLAN_ERR "%s: invalid argument: %p\n",
+ __FUNCTION__, vlandev);
+ return -EINVAL;
+ }
+
+ if (!(vlandev->priv_flags & IFF_802_1Q_VLAN)) {
+ printk(VLAN_DBG "%s: invalid argument, device: %s is not a VLAN device, priv_flags: 0x%4hX.\n",
+ __FUNCTION__, vlandev->name, vlandev->priv_flags);
+ return -EINVAL;
+ }
+
+#ifdef VLAN_DEBUG
+ printk(VLAN_DBG "%s: dev: %p\n", __FUNCTION__, vlandev);
+#endif
+
+ /** NOTE: This will consume the memory pointed to by dent, it seems. */
+ if (VLAN_DEV_INFO(vlandev)->dent) {
+ remove_proc_entry(VLAN_DEV_INFO(vlandev)->dent->name, proc_vlan_dir);
+ VLAN_DEV_INFO(vlandev)->dent = NULL;
+ }
+
+ return 0;
+}
+
+/****** Proc filesystem entry points ****************************************/
+
+/*
+ * The following few functions build the content of /proc/net/vlan/config
+ */
+
+/* starting at dev, find a VLAN device */
+static struct net_device *vlan_skip(struct net_device *dev)
+{
+ while (dev && !(dev->priv_flags & IFF_802_1Q_VLAN))
+ dev = dev->next;
+
+ return dev;
+}
+
+/* start read of /proc/net/vlan/config */
+static void *vlan_seq_start(struct seq_file *seq, loff_t *pos)
+{
+ struct net_device *dev;
+ loff_t i = 1;
+
+ read_lock(&dev_base_lock);
+
+ if (*pos == 0)
+ return SEQ_START_TOKEN;
+
+ for (dev = vlan_skip(dev_base); dev && i < *pos;
+ dev = vlan_skip(dev->next), ++i);
+
+ return (i == *pos) ? dev : NULL;
+}
+
+static void *vlan_seq_next(struct seq_file *seq, void *v, loff_t *pos)
+{
+ ++*pos;
+
+ return vlan_skip((v == SEQ_START_TOKEN)
+ ? dev_base
+ : ((struct net_device *)v)->next);
+}
+
+static void vlan_seq_stop(struct seq_file *seq, void *v)
+{
+ read_unlock(&dev_base_lock);
+}
+
+static int vlan_seq_show(struct seq_file *seq, void *v)
+{
+ if (v == SEQ_START_TOKEN) {
+ const char *nmtype = NULL;
+
+ seq_puts(seq, "VLAN Dev name | VLAN ID\n");
+
+ if (vlan_name_type < ARRAY_SIZE(vlan_name_type_str))
+ nmtype = vlan_name_type_str[vlan_name_type];
+
+ seq_printf(seq, "Name-Type: %s\n",
+ nmtype ? nmtype : "UNKNOWN" );
+ } else {
+ const struct net_device *vlandev = v;
+ const struct vlan_dev_info *dev_info = VLAN_DEV_INFO(vlandev);
+
+ seq_printf(seq, "%-15s| %d | %s\n", vlandev->name,
+ dev_info->vlan_id, dev_info->real_dev->name);
+ }
+ return 0;
+}
+
+static int vlandev_seq_show(struct seq_file *seq, void *offset)
+{
+ struct net_device *vlandev = (struct net_device *) seq->private;
+ const struct vlan_dev_info *dev_info = VLAN_DEV_INFO(vlandev);
+ struct net_device_stats *stats;
+ static const char fmt[] = "%30s %12lu\n";
+ int i;
+
+ if ((vlandev == NULL) || (!(vlandev->priv_flags & IFF_802_1Q_VLAN)))
+ return 0;
+
+ seq_printf(seq, "%s VID: %d REORDER_HDR: %i dev->priv_flags: %hx\n",
+ vlandev->name, dev_info->vlan_id,
+ (int)(dev_info->flags & 1), vlandev->priv_flags);
+
+
+ stats = vlan_dev_get_stats(vlandev);
+
+ seq_printf(seq, fmt, "total frames received", stats->rx_packets);
+ seq_printf(seq, fmt, "total bytes received", stats->rx_bytes);
+ seq_printf(seq, fmt, "Broadcast/Multicast Rcvd", stats->multicast);
+ seq_puts(seq, "\n");
+ seq_printf(seq, fmt, "total frames transmitted", stats->tx_packets);
+ seq_printf(seq, fmt, "total bytes transmitted", stats->tx_bytes);
+ seq_printf(seq, fmt, "total headroom inc",
+ dev_info->cnt_inc_headroom_on_tx);
+ seq_printf(seq, fmt, "total encap on xmit",
+ dev_info->cnt_encap_on_xmit);
+ seq_printf(seq, "Device: %s", dev_info->real_dev->name);
+ /* now show all PRIORITY mappings relating to this VLAN */
+ seq_printf(seq,
+ "\nINGRESS priority mappings: 0:%lu 1:%lu 2:%lu 3:%lu 4:%lu 5:%lu 6:%lu 7:%lu\n",
+ dev_info->ingress_priority_map[0],
+ dev_info->ingress_priority_map[1],
+ dev_info->ingress_priority_map[2],
+ dev_info->ingress_priority_map[3],
+ dev_info->ingress_priority_map[4],
+ dev_info->ingress_priority_map[5],
+ dev_info->ingress_priority_map[6],
+ dev_info->ingress_priority_map[7]);
+
+ seq_printf(seq, "EGRESSS priority Mappings: ");
+ for (i = 0; i < 16; i++) {
+ const struct vlan_priority_tci_mapping *mp
+ = dev_info->egress_priority_map[i];
+ while (mp) {
+ seq_printf(seq, "%lu:%hu ",
+ mp->priority, ((mp->vlan_qos >> 13) & 0x7));
+ mp = mp->next;
+ }
+ }
+ seq_puts(seq, "\n");
+
+ return 0;
+}
diff --git a/net/8021q/vlanproc.h b/net/8021q/vlanproc.h
new file mode 100644
index 00000000000..f908ee332fd
--- /dev/null
+++ b/net/8021q/vlanproc.h
@@ -0,0 +1,19 @@
+#ifndef __BEN_VLAN_PROC_INC__
+#define __BEN_VLAN_PROC_INC__
+
+#ifdef CONFIG_PROC_FS
+int vlan_proc_init(void);
+int vlan_proc_rem_dev(struct net_device *vlandev);
+int vlan_proc_add_dev (struct net_device *vlandev);
+void vlan_proc_cleanup (void);
+
+#else /* No CONFIG_PROC_FS */
+
+#define vlan_proc_init() (0)
+#define vlan_proc_cleanup() do {} while(0)
+#define vlan_proc_add_dev(dev) ({(void)(dev), 0;})
+#define vlan_proc_rem_dev(dev) ({(void)(dev), 0;})
+
+#endif
+
+#endif /* !(__BEN_VLAN_PROC_INC__) */