summaryrefslogtreecommitdiff
path: root/drivers/ata/pata_sis.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/ata/pata_sis.c')
-rw-r--r--drivers/ata/pata_sis.c1034
1 files changed, 1034 insertions, 0 deletions
diff --git a/drivers/ata/pata_sis.c b/drivers/ata/pata_sis.c
new file mode 100644
index 00000000000..2e555168b43
--- /dev/null
+++ b/drivers/ata/pata_sis.c
@@ -0,0 +1,1034 @@
+/*
+ * pata_sis.c - SiS ATA driver
+ *
+ * (C) 2005 Red Hat <alan@redhat.com>
+ *
+ * Based upon linux/drivers/ide/pci/sis5513.c
+ * Copyright (C) 1999-2000 Andre Hedrick <andre@linux-ide.org>
+ * Copyright (C) 2002 Lionel Bouton <Lionel.Bouton@inet6.fr>, Maintainer
+ * Copyright (C) 2003 Vojtech Pavlik <vojtech@suse.cz>
+ * SiS Taiwan : for direct support and hardware.
+ * Daniela Engert : for initial ATA100 advices and numerous others.
+ * John Fremlin, Manfred Spraul, Dave Morgan, Peter Kjellerstedt :
+ * for checking code correctness, providing patches.
+ * Original tests and design on the SiS620 chipset.
+ * ATA100 tests and design on the SiS735 chipset.
+ * ATA16/33 support from specs
+ * ATA133 support for SiS961/962 by L.C. Chang <lcchang@sis.com.tw>
+ *
+ *
+ * TODO
+ * Check MWDMA on drives that don't support MWDMA speed pio cycles ?
+ * More Testing
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/blkdev.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <scsi/scsi_host.h>
+#include <linux/libata.h>
+#include <linux/ata.h>
+
+#define DRV_NAME "pata_sis"
+#define DRV_VERSION "0.4.3"
+
+struct sis_chipset {
+ u16 device; /* PCI host ID */
+ struct ata_port_info *info; /* Info block */
+ /* Probably add family, cable detect type etc here to clean
+ up code later */
+};
+
+/**
+ * sis_port_base - return PCI configuration base for dev
+ * @adev: device
+ *
+ * Returns the base of the PCI configuration registers for this port
+ * number.
+ */
+
+static int sis_port_base(struct ata_device *adev)
+{
+ return 0x40 + (4 * adev->ap->port_no) + (2 * adev->devno);
+}
+
+/**
+ * sis_133_pre_reset - check for 40/80 pin
+ * @ap: Port
+ *
+ * Perform cable detection for the later UDMA133 capable
+ * SiS chipset.
+ */
+
+static int sis_133_pre_reset(struct ata_port *ap)
+{
+ static const struct pci_bits sis_enable_bits[] = {
+ { 0x4aU, 1U, 0x02UL, 0x02UL }, /* port 0 */
+ { 0x4aU, 1U, 0x04UL, 0x04UL }, /* port 1 */
+ };
+
+ struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+ u16 tmp;
+
+ if (!pci_test_config_bits(pdev, &sis_enable_bits[ap->port_no])) {
+ ata_port_disable(ap);
+ printk(KERN_INFO "ata%u: port disabled. ignoring.\n", ap->id);
+ return 0;
+ }
+ /* The top bit of this register is the cable detect bit */
+ pci_read_config_word(pdev, 0x50 + 2 * ap->port_no, &tmp);
+ if (tmp & 0x8000)
+ ap->cbl = ATA_CBL_PATA40;
+ else
+ ap->cbl = ATA_CBL_PATA80;
+
+ return ata_std_prereset(ap);
+}
+
+/**
+ * sis_error_handler - Probe specified port on PATA host controller
+ * @ap: Port to probe
+ *
+ * LOCKING:
+ * None (inherited from caller).
+ */
+
+static void sis_133_error_handler(struct ata_port *ap)
+{
+ ata_bmdma_drive_eh(ap, sis_133_pre_reset, ata_std_softreset, NULL, ata_std_postreset);
+}
+
+
+/**
+ * sis_66_pre_reset - check for 40/80 pin
+ * @ap: Port
+ *
+ * Perform cable detection on the UDMA66, UDMA100 and early UDMA133
+ * SiS IDE controllers.
+ */
+
+static int sis_66_pre_reset(struct ata_port *ap)
+{
+ static const struct pci_bits sis_enable_bits[] = {
+ { 0x4aU, 1U, 0x02UL, 0x02UL }, /* port 0 */
+ { 0x4aU, 1U, 0x04UL, 0x04UL }, /* port 1 */
+ };
+
+ struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+ u8 tmp;
+
+ if (!pci_test_config_bits(pdev, &sis_enable_bits[ap->port_no])) {
+ ata_port_disable(ap);
+ printk(KERN_INFO "ata%u: port disabled. ignoring.\n", ap->id);
+ return 0;
+ }
+ /* Older chips keep cable detect in bits 4/5 of reg 0x48 */
+ pci_read_config_byte(pdev, 0x48, &tmp);
+ tmp >>= ap->port_no;
+ if (tmp & 0x10)
+ ap->cbl = ATA_CBL_PATA40;
+ else
+ ap->cbl = ATA_CBL_PATA80;
+
+ return ata_std_prereset(ap);
+}
+
+/**
+ * sis_66_error_handler - Probe specified port on PATA host controller
+ * @ap: Port to probe
+ * @classes:
+ *
+ * LOCKING:
+ * None (inherited from caller).
+ */
+
+static void sis_66_error_handler(struct ata_port *ap)
+{
+ ata_bmdma_drive_eh(ap, sis_66_pre_reset, ata_std_softreset, NULL, ata_std_postreset);
+}
+
+/**
+ * sis_old_pre_reset - probe begin
+ * @ap: ATA port
+ *
+ * Set up cable type and use generic probe init
+ */
+
+static int sis_old_pre_reset(struct ata_port *ap)
+{
+ static const struct pci_bits sis_enable_bits[] = {
+ { 0x4aU, 1U, 0x02UL, 0x02UL }, /* port 0 */
+ { 0x4aU, 1U, 0x04UL, 0x04UL }, /* port 1 */
+ };
+
+ struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+
+ if (!pci_test_config_bits(pdev, &sis_enable_bits[ap->port_no])) {
+ ata_port_disable(ap);
+ printk(KERN_INFO "ata%u: port disabled. ignoring.\n", ap->id);
+ return 0;
+ }
+ ap->cbl = ATA_CBL_PATA40;
+ return ata_std_prereset(ap);
+}
+
+
+/**
+ * sis_old_error_handler - Probe specified port on PATA host controller
+ * @ap: Port to probe
+ *
+ * LOCKING:
+ * None (inherited from caller).
+ */
+
+static void sis_old_error_handler(struct ata_port *ap)
+{
+ ata_bmdma_drive_eh(ap, sis_old_pre_reset, ata_std_softreset, NULL, ata_std_postreset);
+}
+
+/**
+ * sis_set_fifo - Set RWP fifo bits for this device
+ * @ap: Port
+ * @adev: Device
+ *
+ * SIS chipsets implement prefetch/postwrite bits for each device
+ * on both channels. This functionality is not ATAPI compatible and
+ * must be configured according to the class of device present
+ */
+
+static void sis_set_fifo(struct ata_port *ap, struct ata_device *adev)
+{
+ struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+ u8 fifoctrl;
+ u8 mask = 0x11;
+
+ mask <<= (2 * ap->port_no);
+ mask <<= adev->devno;
+
+ /* This holds various bits including the FIFO control */
+ pci_read_config_byte(pdev, 0x4B, &fifoctrl);
+ fifoctrl &= ~mask;
+
+ /* Enable for ATA (disk) only */
+ if (adev->class == ATA_DEV_ATA)
+ fifoctrl |= mask;
+ pci_write_config_byte(pdev, 0x4B, fifoctrl);
+}
+
+/**
+ * sis_old_set_piomode - Initialize host controller PATA PIO timings
+ * @ap: Port whose timings we are configuring
+ * @adev: Device we are configuring for.
+ *
+ * Set PIO mode for device, in host controller PCI config space. This
+ * function handles PIO set up for all chips that are pre ATA100 and
+ * also early ATA100 devices.
+ *
+ * LOCKING:
+ * None (inherited from caller).
+ */
+
+static void sis_old_set_piomode (struct ata_port *ap, struct ata_device *adev)
+{
+ struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+ int port = sis_port_base(adev);
+ u8 t1, t2;
+ int speed = adev->pio_mode - XFER_PIO_0;
+
+ const u8 active[] = { 0x00, 0x07, 0x04, 0x03, 0x01 };
+ const u8 recovery[] = { 0x00, 0x06, 0x04, 0x03, 0x03 };
+
+ sis_set_fifo(ap, adev);
+
+ pci_read_config_byte(pdev, port, &t1);
+ pci_read_config_byte(pdev, port + 1, &t2);
+
+ t1 &= ~0x0F; /* Clear active/recovery timings */
+ t2 &= ~0x07;
+
+ t1 |= active[speed];
+ t2 |= recovery[speed];
+
+ pci_write_config_byte(pdev, port, t1);
+ pci_write_config_byte(pdev, port + 1, t2);
+}
+
+/**
+ * sis_100_set_pioode - Initialize host controller PATA PIO timings
+ * @ap: Port whose timings we are configuring
+ * @adev: Device we are configuring for.
+ *
+ * Set PIO mode for device, in host controller PCI config space. This
+ * function handles PIO set up for ATA100 devices and early ATA133.
+ *
+ * LOCKING:
+ * None (inherited from caller).
+ */
+
+static void sis_100_set_piomode (struct ata_port *ap, struct ata_device *adev)
+{
+ struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+ int port = sis_port_base(adev);
+ int speed = adev->pio_mode - XFER_PIO_0;
+
+ const u8 actrec[] = { 0x00, 0x67, 0x44, 0x33, 0x31 };
+
+ sis_set_fifo(ap, adev);
+
+ pci_write_config_byte(pdev, port, actrec[speed]);
+}
+
+/**
+ * sis_133_set_pioode - Initialize host controller PATA PIO timings
+ * @ap: Port whose timings we are configuring
+ * @adev: Device we are configuring for.
+ *
+ * Set PIO mode for device, in host controller PCI config space. This
+ * function handles PIO set up for the later ATA133 devices.
+ *
+ * LOCKING:
+ * None (inherited from caller).
+ */
+
+static void sis_133_set_piomode (struct ata_port *ap, struct ata_device *adev)
+{
+ struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+ int port = 0x40;
+ u32 t1;
+ u32 reg54;
+ int speed = adev->pio_mode - XFER_PIO_0;
+
+ const u32 timing133[] = {
+ 0x28269000, /* Recovery << 24 | Act << 16 | Ini << 12 */
+ 0x0C266000,
+ 0x04263000,
+ 0x0C0A3000,
+ 0x05093000
+ };
+ const u32 timing100[] = {
+ 0x1E1C6000, /* Recovery << 24 | Act << 16 | Ini << 12 */
+ 0x091C4000,
+ 0x031C2000,
+ 0x09072000,
+ 0x04062000
+ };
+
+ sis_set_fifo(ap, adev);
+
+ /* If bit 14 is set then the registers are mapped at 0x70 not 0x40 */
+ pci_read_config_dword(pdev, 0x54, &reg54);
+ if (reg54 & 0x40000000)
+ port = 0x70;
+ port += 8 * ap->port_no + 4 * adev->devno;
+
+ pci_read_config_dword(pdev, port, &t1);
+ t1 &= 0xC0C00FFF; /* Mask out timing */
+
+ if (t1 & 0x08) /* 100 or 133 ? */
+ t1 |= timing133[speed];
+ else
+ t1 |= timing100[speed];
+ pci_write_config_byte(pdev, port, t1);
+}
+
+/**
+ * sis_old_set_dmamode - Initialize host controller PATA DMA timings
+ * @ap: Port whose timings we are configuring
+ * @adev: Device to program
+ *
+ * Set UDMA/MWDMA mode for device, in host controller PCI config space.
+ * Handles pre UDMA and UDMA33 devices. Supports MWDMA as well unlike
+ * the old ide/pci driver.
+ *
+ * LOCKING:
+ * None (inherited from caller).
+ */
+
+static void sis_old_set_dmamode (struct ata_port *ap, struct ata_device *adev)
+{
+ struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+ int speed = adev->dma_mode - XFER_MW_DMA_0;
+ int drive_pci = sis_port_base(adev);
+ u16 timing;
+
+ const u16 mwdma_bits[] = { 0x707, 0x202, 0x202 };
+ const u16 udma_bits[] = { 0xE000, 0xC000, 0xA000 };
+
+ pci_read_config_word(pdev, drive_pci, &timing);
+
+ if (adev->dma_mode < XFER_UDMA_0) {
+ /* bits 3-0 hold recovery timing bits 8-10 active timing and
+ the higer bits are dependant on the device */
+ timing &= ~ 0x870F;
+ timing |= mwdma_bits[speed];
+ pci_write_config_word(pdev, drive_pci, timing);
+ } else {
+ /* Bit 15 is UDMA on/off, bit 13-14 are cycle time */
+ speed = adev->dma_mode - XFER_UDMA_0;
+ timing &= ~0x6000;
+ timing |= udma_bits[speed];
+ }
+}
+
+/**
+ * sis_66_set_dmamode - Initialize host controller PATA DMA timings
+ * @ap: Port whose timings we are configuring
+ * @adev: Device to program
+ *
+ * Set UDMA/MWDMA mode for device, in host controller PCI config space.
+ * Handles UDMA66 and early UDMA100 devices. Supports MWDMA as well unlike
+ * the old ide/pci driver.
+ *
+ * LOCKING:
+ * None (inherited from caller).
+ */
+
+static void sis_66_set_dmamode (struct ata_port *ap, struct ata_device *adev)
+{
+ struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+ int speed = adev->dma_mode - XFER_MW_DMA_0;
+ int drive_pci = sis_port_base(adev);
+ u16 timing;
+
+ const u16 mwdma_bits[] = { 0x707, 0x202, 0x202 };
+ const u16 udma_bits[] = { 0xF000, 0xD000, 0xB000, 0xA000, 0x9000};
+
+ pci_read_config_word(pdev, drive_pci, &timing);
+
+ if (adev->dma_mode < XFER_UDMA_0) {
+ /* bits 3-0 hold recovery timing bits 8-10 active timing and
+ the higer bits are dependant on the device, bit 15 udma */
+ timing &= ~ 0x870F;
+ timing |= mwdma_bits[speed];
+ } else {
+ /* Bit 15 is UDMA on/off, bit 12-14 are cycle time */
+ speed = adev->dma_mode - XFER_UDMA_0;
+ timing &= ~0x6000;
+ timing |= udma_bits[speed];
+ }
+ pci_write_config_word(pdev, drive_pci, timing);
+}
+
+/**
+ * sis_100_set_dmamode - Initialize host controller PATA DMA timings
+ * @ap: Port whose timings we are configuring
+ * @adev: Device to program
+ *
+ * Set UDMA/MWDMA mode for device, in host controller PCI config space.
+ * Handles UDMA66 and early UDMA100 devices.
+ *
+ * LOCKING:
+ * None (inherited from caller).
+ */
+
+static void sis_100_set_dmamode (struct ata_port *ap, struct ata_device *adev)
+{
+ struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+ int speed = adev->dma_mode - XFER_MW_DMA_0;
+ int drive_pci = sis_port_base(adev);
+ u16 timing;
+
+ const u16 udma_bits[] = { 0x8B00, 0x8700, 0x8500, 0x8300, 0x8200, 0x8100};
+
+ pci_read_config_word(pdev, drive_pci, &timing);
+
+ if (adev->dma_mode < XFER_UDMA_0) {
+ /* NOT SUPPORTED YET: NEED DATA SHEET. DITTO IN OLD DRIVER */
+ } else {
+ /* Bit 15 is UDMA on/off, bit 12-14 are cycle time */
+ speed = adev->dma_mode - XFER_UDMA_0;
+ timing &= ~0x0F00;
+ timing |= udma_bits[speed];
+ }
+ pci_write_config_word(pdev, drive_pci, timing);
+}
+
+/**
+ * sis_133_early_set_dmamode - Initialize host controller PATA DMA timings
+ * @ap: Port whose timings we are configuring
+ * @adev: Device to program
+ *
+ * Set UDMA/MWDMA mode for device, in host controller PCI config space.
+ * Handles early SiS 961 bridges. Supports MWDMA as well unlike
+ * the old ide/pci driver.
+ *
+ * LOCKING:
+ * None (inherited from caller).
+ */
+
+static void sis_133_early_set_dmamode (struct ata_port *ap, struct ata_device *adev)
+{
+ struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+ int speed = adev->dma_mode - XFER_MW_DMA_0;
+ int drive_pci = sis_port_base(adev);
+ u16 timing;
+
+ const u16 udma_bits[] = { 0x8F00, 0x8A00, 0x8700, 0x8500, 0x8300, 0x8200, 0x8100};
+
+ pci_read_config_word(pdev, drive_pci, &timing);
+
+ if (adev->dma_mode < XFER_UDMA_0) {
+ /* NOT SUPPORTED YET: NEED DATA SHEET. DITTO IN OLD DRIVER */
+ } else {
+ /* Bit 15 is UDMA on/off, bit 12-14 are cycle time */
+ speed = adev->dma_mode - XFER_UDMA_0;
+ timing &= ~0x0F00;
+ timing |= udma_bits[speed];
+ }
+ pci_write_config_word(pdev, drive_pci, timing);
+}
+
+/**
+ * sis_133_set_dmamode - Initialize host controller PATA DMA timings
+ * @ap: Port whose timings we are configuring
+ * @adev: Device to program
+ *
+ * Set UDMA/MWDMA mode for device, in host controller PCI config space.
+ * Handles early SiS 961 bridges. Supports MWDMA as well unlike
+ * the old ide/pci driver.
+ *
+ * LOCKING:
+ * None (inherited from caller).
+ */
+
+static void sis_133_set_dmamode (struct ata_port *ap, struct ata_device *adev)
+{
+ struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+ int speed = adev->dma_mode - XFER_MW_DMA_0;
+ int port = 0x40;
+ u32 t1;
+ u32 reg54;
+
+ /* bits 4- cycle time 8 - cvs time */
+ const u32 timing_u100[] = { 0x6B0, 0x470, 0x350, 0x140, 0x120, 0x110, 0x000 };
+ const u32 timing_u133[] = { 0x9F0, 0x6A0, 0x470, 0x250, 0x230, 0x220, 0x210 };
+
+ /* If bit 14 is set then the registers are mapped at 0x70 not 0x40 */
+ pci_read_config_dword(pdev, 0x54, &reg54);
+ if (reg54 & 0x40000000)
+ port = 0x70;
+ port += (8 * ap->port_no) + (4 * adev->devno);
+
+ pci_read_config_dword(pdev, port, &t1);
+
+ if (adev->dma_mode < XFER_UDMA_0) {
+ t1 &= ~0x00000004;
+ /* FIXME: need data sheet to add MWDMA here. Also lacking on
+ ide/pci driver */
+ } else {
+ speed = adev->dma_mode - XFER_UDMA_0;
+ /* if & 8 no UDMA133 - need info for ... */
+ t1 &= ~0x00000FF0;
+ t1 |= 0x00000004;
+ if (t1 & 0x08)
+ t1 |= timing_u133[speed];
+ else
+ t1 |= timing_u100[speed];
+ }
+ pci_write_config_dword(pdev, port, t1);
+}
+
+static struct scsi_host_template sis_sht = {
+ .module = THIS_MODULE,
+ .name = DRV_NAME,
+ .ioctl = ata_scsi_ioctl,
+ .queuecommand = ata_scsi_queuecmd,
+ .can_queue = ATA_DEF_QUEUE,
+ .this_id = ATA_SHT_THIS_ID,
+ .sg_tablesize = LIBATA_MAX_PRD,
+ .max_sectors = ATA_MAX_SECTORS,
+ .cmd_per_lun = ATA_SHT_CMD_PER_LUN,
+ .emulated = ATA_SHT_EMULATED,
+ .use_clustering = ATA_SHT_USE_CLUSTERING,
+ .proc_name = DRV_NAME,
+ .dma_boundary = ATA_DMA_BOUNDARY,
+ .slave_configure = ata_scsi_slave_config,
+ .bios_param = ata_std_bios_param,
+};
+
+static const struct ata_port_operations sis_133_ops = {
+ .port_disable = ata_port_disable,
+ .set_piomode = sis_133_set_piomode,
+ .set_dmamode = sis_133_set_dmamode,
+ .mode_filter = ata_pci_default_filter,
+
+ .tf_load = ata_tf_load,
+ .tf_read = ata_tf_read,
+ .check_status = ata_check_status,
+ .exec_command = ata_exec_command,
+ .dev_select = ata_std_dev_select,
+
+ .freeze = ata_bmdma_freeze,
+ .thaw = ata_bmdma_thaw,
+ .error_handler = sis_133_error_handler,
+ .post_internal_cmd = ata_bmdma_post_internal_cmd,
+
+ .bmdma_setup = ata_bmdma_setup,
+ .bmdma_start = ata_bmdma_start,
+ .bmdma_stop = ata_bmdma_stop,
+ .bmdma_status = ata_bmdma_status,
+ .qc_prep = ata_qc_prep,
+ .qc_issue = ata_qc_issue_prot,
+ .data_xfer = ata_pio_data_xfer,
+
+ .eng_timeout = ata_eng_timeout,
+
+ .irq_handler = ata_interrupt,
+ .irq_clear = ata_bmdma_irq_clear,
+
+ .port_start = ata_port_start,
+ .port_stop = ata_port_stop,
+ .host_stop = ata_host_stop,
+};
+
+static const struct ata_port_operations sis_133_early_ops = {
+ .port_disable = ata_port_disable,
+ .set_piomode = sis_100_set_piomode,
+ .set_dmamode = sis_133_early_set_dmamode,
+ .mode_filter = ata_pci_default_filter,
+
+ .tf_load = ata_tf_load,
+ .tf_read = ata_tf_read,
+ .check_status = ata_check_status,
+ .exec_command = ata_exec_command,
+ .dev_select = ata_std_dev_select,
+
+ .freeze = ata_bmdma_freeze,
+ .thaw = ata_bmdma_thaw,
+ .error_handler = sis_66_error_handler,
+ .post_internal_cmd = ata_bmdma_post_internal_cmd,
+
+ .bmdma_setup = ata_bmdma_setup,
+ .bmdma_start = ata_bmdma_start,
+ .bmdma_stop = ata_bmdma_stop,
+ .bmdma_status = ata_bmdma_status,
+ .qc_prep = ata_qc_prep,
+ .qc_issue = ata_qc_issue_prot,
+ .data_xfer = ata_pio_data_xfer,
+
+ .eng_timeout = ata_eng_timeout,
+
+ .irq_handler = ata_interrupt,
+ .irq_clear = ata_bmdma_irq_clear,
+
+ .port_start = ata_port_start,
+ .port_stop = ata_port_stop,
+ .host_stop = ata_host_stop,
+};
+
+static const struct ata_port_operations sis_100_ops = {
+ .port_disable = ata_port_disable,
+ .set_piomode = sis_100_set_piomode,
+ .set_dmamode = sis_100_set_dmamode,
+ .mode_filter = ata_pci_default_filter,
+
+ .tf_load = ata_tf_load,
+ .tf_read = ata_tf_read,
+ .check_status = ata_check_status,
+ .exec_command = ata_exec_command,
+ .dev_select = ata_std_dev_select,
+
+ .freeze = ata_bmdma_freeze,
+ .thaw = ata_bmdma_thaw,
+ .error_handler = sis_66_error_handler,
+ .post_internal_cmd = ata_bmdma_post_internal_cmd,
+
+
+ .bmdma_setup = ata_bmdma_setup,
+ .bmdma_start = ata_bmdma_start,
+ .bmdma_stop = ata_bmdma_stop,
+ .bmdma_status = ata_bmdma_status,
+ .qc_prep = ata_qc_prep,
+ .qc_issue = ata_qc_issue_prot,
+ .data_xfer = ata_pio_data_xfer,
+
+ .eng_timeout = ata_eng_timeout,
+
+ .irq_handler = ata_interrupt,
+ .irq_clear = ata_bmdma_irq_clear,
+
+ .port_start = ata_port_start,
+ .port_stop = ata_port_stop,
+ .host_stop = ata_host_stop,
+};
+
+static const struct ata_port_operations sis_66_ops = {
+ .port_disable = ata_port_disable,
+ .set_piomode = sis_old_set_piomode,
+ .set_dmamode = sis_66_set_dmamode,
+ .mode_filter = ata_pci_default_filter,
+
+ .tf_load = ata_tf_load,
+ .tf_read = ata_tf_read,
+ .check_status = ata_check_status,
+ .exec_command = ata_exec_command,
+ .dev_select = ata_std_dev_select,
+
+ .freeze = ata_bmdma_freeze,
+ .thaw = ata_bmdma_thaw,
+ .error_handler = sis_66_error_handler,
+ .post_internal_cmd = ata_bmdma_post_internal_cmd,
+
+ .bmdma_setup = ata_bmdma_setup,
+ .bmdma_start = ata_bmdma_start,
+ .bmdma_stop = ata_bmdma_stop,
+ .bmdma_status = ata_bmdma_status,
+ .qc_prep = ata_qc_prep,
+ .qc_issue = ata_qc_issue_prot,
+ .data_xfer = ata_pio_data_xfer,
+
+ .eng_timeout = ata_eng_timeout,
+
+ .irq_handler = ata_interrupt,
+ .irq_clear = ata_bmdma_irq_clear,
+
+ .port_start = ata_port_start,
+ .port_stop = ata_port_stop,
+ .host_stop = ata_host_stop,
+};
+
+static const struct ata_port_operations sis_old_ops = {
+ .port_disable = ata_port_disable,
+ .set_piomode = sis_old_set_piomode,
+ .set_dmamode = sis_old_set_dmamode,
+ .mode_filter = ata_pci_default_filter,
+
+ .tf_load = ata_tf_load,
+ .tf_read = ata_tf_read,
+ .check_status = ata_check_status,
+ .exec_command = ata_exec_command,
+ .dev_select = ata_std_dev_select,
+
+ .freeze = ata_bmdma_freeze,
+ .thaw = ata_bmdma_thaw,
+ .error_handler = sis_old_error_handler,
+ .post_internal_cmd = ata_bmdma_post_internal_cmd,
+
+ .bmdma_setup = ata_bmdma_setup,
+ .bmdma_start = ata_bmdma_start,
+ .bmdma_stop = ata_bmdma_stop,
+ .bmdma_status = ata_bmdma_status,
+ .qc_prep = ata_qc_prep,
+ .qc_issue = ata_qc_issue_prot,
+ .data_xfer = ata_pio_data_xfer,
+
+ .eng_timeout = ata_eng_timeout,
+
+ .irq_handler = ata_interrupt,
+ .irq_clear = ata_bmdma_irq_clear,
+
+ .port_start = ata_port_start,
+ .port_stop = ata_port_stop,
+ .host_stop = ata_host_stop,
+};
+
+static struct ata_port_info sis_info = {
+ .sht = &sis_sht,
+ .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
+ .pio_mask = 0x1f, /* pio0-4 */
+ .mwdma_mask = 0x07,
+ .udma_mask = 0,
+ .port_ops = &sis_old_ops,
+};
+static struct ata_port_info sis_info33 = {
+ .sht = &sis_sht,
+ .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
+ .pio_mask = 0x1f, /* pio0-4 */
+ .mwdma_mask = 0x07,
+ .udma_mask = ATA_UDMA2, /* UDMA 33 */
+ .port_ops = &sis_old_ops,
+};
+static struct ata_port_info sis_info66 = {
+ .sht = &sis_sht,
+ .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
+ .pio_mask = 0x1f, /* pio0-4 */
+ .udma_mask = ATA_UDMA4, /* UDMA 66 */
+ .port_ops = &sis_66_ops,
+};
+static struct ata_port_info sis_info100 = {
+ .sht = &sis_sht,
+ .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
+ .pio_mask = 0x1f, /* pio0-4 */
+ .udma_mask = ATA_UDMA5,
+ .port_ops = &sis_100_ops,
+};
+static struct ata_port_info sis_info100_early = {
+ .sht = &sis_sht,
+ .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
+ .udma_mask = ATA_UDMA5,
+ .pio_mask = 0x1f, /* pio0-4 */
+ .port_ops = &sis_66_ops,
+};
+static struct ata_port_info sis_info133 = {
+ .sht = &sis_sht,
+ .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
+ .pio_mask = 0x1f, /* pio0-4 */
+ .udma_mask = ATA_UDMA6,
+ .port_ops = &sis_133_ops,
+};
+static struct ata_port_info sis_info133_early = {
+ .sht = &sis_sht,
+ .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
+ .pio_mask = 0x1f, /* pio0-4 */
+ .udma_mask = ATA_UDMA6,
+ .port_ops = &sis_133_early_ops,
+};
+
+
+static void sis_fixup(struct pci_dev *pdev, struct sis_chipset *sis)
+{
+ u16 regw;
+ u8 reg;
+
+ if (sis->info == &sis_info133) {
+ pci_read_config_word(pdev, 0x50, &regw);
+ if (regw & 0x08)
+ pci_write_config_word(pdev, 0x50, regw & ~0x08);
+ pci_read_config_word(pdev, 0x52, &regw);
+ if (regw & 0x08)
+ pci_write_config_word(pdev, 0x52, regw & ~0x08);
+ return;
+ }
+
+ if (sis->info == &sis_info133_early || sis->info == &sis_info100) {
+ /* Fix up latency */
+ pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 0x80);
+ /* Set compatibility bit */
+ pci_read_config_byte(pdev, 0x49, &reg);
+ if (!(reg & 0x01))
+ pci_write_config_byte(pdev, 0x49, reg | 0x01);
+ return;
+ }
+
+ if (sis->info == &sis_info66 || sis->info == &sis_info100_early) {
+ /* Fix up latency */
+ pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 0x80);
+ /* Set compatibility bit */
+ pci_read_config_byte(pdev, 0x52, &reg);
+ if (!(reg & 0x04))
+ pci_write_config_byte(pdev, 0x52, reg | 0x04);
+ return;
+ }
+
+ if (sis->info == &sis_info33) {
+ pci_read_config_byte(pdev, PCI_CLASS_PROG, &reg);
+ if (( reg & 0x0F ) != 0x00)
+ pci_write_config_byte(pdev, PCI_CLASS_PROG, reg & 0xF0);
+ /* Fall through to ATA16 fixup below */
+ }
+
+ if (sis->info == &sis_info || sis->info == &sis_info33) {
+ /* force per drive recovery and active timings
+ needed on ATA_33 and below chips */
+ pci_read_config_byte(pdev, 0x52, &reg);
+ if (!(reg & 0x08))
+ pci_write_config_byte(pdev, 0x52, reg|0x08);
+ return;
+ }
+
+ BUG();
+}
+
+/**
+ * sis_init_one - Register SiS ATA PCI device with kernel services
+ * @pdev: PCI device to register
+ * @ent: Entry in sis_pci_tbl matching with @pdev
+ *
+ * Called from kernel PCI layer. We probe for combined mode (sigh),
+ * and then hand over control to libata, for it to do the rest.
+ *
+ * LOCKING:
+ * Inherited from PCI layer (may sleep).
+ *
+ * RETURNS:
+ * Zero on success, or -ERRNO value.
+ */
+
+static int sis_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
+{
+ static int printed_version;
+ static struct ata_port_info *port_info[2];
+ struct ata_port_info *port;
+ struct pci_dev *host = NULL;
+ struct sis_chipset *chipset = NULL;
+
+ static struct sis_chipset sis_chipsets[] = {
+
+ { 0x0968, &sis_info133 },
+ { 0x0966, &sis_info133 },
+ { 0x0965, &sis_info133 },
+ { 0x0745, &sis_info100 },
+ { 0x0735, &sis_info100 },
+ { 0x0733, &sis_info100 },
+ { 0x0635, &sis_info100 },
+ { 0x0633, &sis_info100 },
+
+ { 0x0730, &sis_info100_early }, /* 100 with ATA 66 layout */
+ { 0x0550, &sis_info100_early }, /* 100 with ATA 66 layout */
+
+ { 0x0640, &sis_info66 },
+ { 0x0630, &sis_info66 },
+ { 0x0620, &sis_info66 },
+ { 0x0540, &sis_info66 },
+ { 0x0530, &sis_info66 },
+
+ { 0x5600, &sis_info33 },
+ { 0x5598, &sis_info33 },
+ { 0x5597, &sis_info33 },
+ { 0x5591, &sis_info33 },
+ { 0x5582, &sis_info33 },
+ { 0x5581, &sis_info33 },
+
+ { 0x5596, &sis_info },
+ { 0x5571, &sis_info },
+ { 0x5517, &sis_info },
+ { 0x5511, &sis_info },
+
+ {0}
+ };
+ static struct sis_chipset sis133_early = {
+ 0x0, &sis_info133_early
+ };
+ static struct sis_chipset sis133 = {
+ 0x0, &sis_info133
+ };
+ static struct sis_chipset sis100_early = {
+ 0x0, &sis_info100_early
+ };
+ static struct sis_chipset sis100 = {
+ 0x0, &sis_info100
+ };
+
+ if (!printed_version++)
+ dev_printk(KERN_DEBUG, &pdev->dev,
+ "version " DRV_VERSION "\n");
+
+ /* We have to find the bridge first */
+
+ for (chipset = &sis_chipsets[0]; chipset->device; chipset++) {
+ host = pci_get_device(PCI_VENDOR_ID_SI, chipset->device, NULL);
+ if (host != NULL) {
+ if (chipset->device == 0x630) { /* SIS630 */
+ u8 host_rev;
+ pci_read_config_byte(host, PCI_REVISION_ID, &host_rev);
+ if (host_rev >= 0x30) /* 630 ET */
+ chipset = &sis100_early;
+ }
+ break;
+ }
+ }
+
+ /* Look for concealed bridges */
+ if (host == NULL) {
+ /* Second check */
+ u32 idemisc;
+ u16 trueid;
+
+ /* Disable ID masking and register remapping then
+ see what the real ID is */
+
+ pci_read_config_dword(pdev, 0x54, &idemisc);
+ pci_write_config_dword(pdev, 0x54, idemisc & 0x7fffffff);
+ pci_read_config_word(pdev, PCI_DEVICE_ID, &trueid);
+ pci_write_config_dword(pdev, 0x54, idemisc);
+
+ switch(trueid) {
+ case 0x5518: /* SIS 962/963 */
+ chipset = &sis133;
+ if ((idemisc & 0x40000000) == 0) {
+ pci_write_config_dword(pdev, 0x54, idemisc | 0x40000000);
+ printk(KERN_INFO "SIS5513: Switching to 5513 register mapping\n");
+ }
+ break;
+ case 0x0180: /* SIS 965/965L */
+ chipset = &sis133;
+ break;
+ case 0x1180: /* SIS 966/966L */
+ chipset = &sis133;
+ break;
+ }
+ }
+
+ /* Further check */
+ if (chipset == NULL) {
+ struct pci_dev *lpc_bridge;
+ u16 trueid;
+ u8 prefctl;
+ u8 idecfg;
+ u8 sbrev;
+
+ /* Try the second unmasking technique */
+ pci_read_config_byte(pdev, 0x4a, &idecfg);
+ pci_write_config_byte(pdev, 0x4a, idecfg | 0x10);
+ pci_read_config_word(pdev, PCI_DEVICE_ID, &trueid);
+ pci_write_config_byte(pdev, 0x4a, idecfg);
+
+ switch(trueid) {
+ case 0x5517:
+ lpc_bridge = pci_get_slot(pdev->bus, 0x10); /* Bus 0 Dev 2 Fn 0 */
+ if (lpc_bridge == NULL)
+ break;
+ pci_read_config_byte(lpc_bridge, PCI_REVISION_ID, &sbrev);
+ pci_read_config_byte(pdev, 0x49, &prefctl);
+ pci_dev_put(lpc_bridge);
+
+ if (sbrev == 0x10 && (prefctl & 0x80)) {
+ chipset = &sis133_early;
+ break;
+ }
+ chipset = &sis100;
+ break;
+ }
+ }
+ pci_dev_put(host);
+
+ /* No chipset info, no support */
+ if (chipset == NULL)
+ return -ENODEV;
+
+ port = chipset->info;
+ port->private_data = chipset;
+
+ sis_fixup(pdev, chipset);
+
+ port_info[0] = port_info[1] = port;
+ return ata_pci_init_one(pdev, port_info, 2);
+}
+
+static const struct pci_device_id sis_pci_tbl[] = {
+ { PCI_DEVICE(PCI_VENDOR_ID_SI, 0x5513), }, /* SiS 5513 */
+ { PCI_DEVICE(PCI_VENDOR_ID_SI, 0x5518), }, /* SiS 5518 */
+ { }
+};
+
+static struct pci_driver sis_pci_driver = {
+ .name = DRV_NAME,
+ .id_table = sis_pci_tbl,
+ .probe = sis_init_one,
+ .remove = ata_pci_remove_one,
+};
+
+static int __init sis_init(void)
+{
+ return pci_register_driver(&sis_pci_driver);
+}
+
+static void __exit sis_exit(void)
+{
+ pci_unregister_driver(&sis_pci_driver);
+}
+
+
+module_init(sis_init);
+module_exit(sis_exit);
+
+MODULE_AUTHOR("Alan Cox");
+MODULE_DESCRIPTION("SCSI low-level driver for SiS ATA");
+MODULE_LICENSE("GPL");
+MODULE_DEVICE_TABLE(pci, sis_pci_tbl);
+MODULE_VERSION(DRV_VERSION);
+
generated by cgit v1.2.3 (git 2.39.1) at 2024-04-25 07:16:36 +0000