summaryrefslogtreecommitdiff
path: root/drivers/ata/pata_cs5530.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/ata/pata_cs5530.c')
-rw-r--r--drivers/ata/pata_cs5530.c387
1 files changed, 387 insertions, 0 deletions
diff --git a/drivers/ata/pata_cs5530.c b/drivers/ata/pata_cs5530.c
new file mode 100644
index 00000000000..f3d8a3bc1e7
--- /dev/null
+++ b/drivers/ata/pata_cs5530.c
@@ -0,0 +1,387 @@
+/*
+ * pata-cs5530.c - CS5530 PATA for new ATA layer
+ * (C) 2005 Red Hat Inc
+ * Alan Cox <alan@redhat.com>
+ *
+ * based upon cs5530.c by Mark Lord.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * Loosely based on the piix & svwks drivers.
+ *
+ * Documentation:
+ * Available from AMD web site.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/blkdev.h>
+#include <linux/delay.h>
+#include <scsi/scsi_host.h>
+#include <linux/libata.h>
+#include <linux/dmi.h>
+
+#define DRV_NAME "pata_cs5530"
+#define DRV_VERSION "0.6"
+
+/**
+ * cs5530_set_piomode - PIO setup
+ * @ap: ATA interface
+ * @adev: device on the interface
+ *
+ * Set our PIO requirements. This is fairly simple on the CS5530
+ * chips.
+ */
+
+static void cs5530_set_piomode(struct ata_port *ap, struct ata_device *adev)
+{
+ static const unsigned int cs5530_pio_timings[2][5] = {
+ {0x00009172, 0x00012171, 0x00020080, 0x00032010, 0x00040010},
+ {0xd1329172, 0x71212171, 0x30200080, 0x20102010, 0x00100010}
+ };
+ unsigned long base = ( ap->ioaddr.bmdma_addr & ~0x0F) + 0x20 + 0x10 * ap->port_no;
+ u32 tuning;
+ int format;
+
+ /* Find out which table to use */
+ tuning = inl(base + 0x04);
+ format = (tuning & 0x80000000UL) ? 1 : 0;
+
+ /* Now load the right timing register */
+ if (adev->devno)
+ base += 0x08;
+
+ outl(cs5530_pio_timings[format][adev->pio_mode - XFER_PIO_0], base);
+}
+
+/**
+ * cs5530_set_dmamode - DMA timing setup
+ * @ap: ATA interface
+ * @adev: Device being configured
+ *
+ * We cannot mix MWDMA and UDMA without reloading timings each switch
+ * master to slave. We track the last DMA setup in order to minimise
+ * reloads.
+ */
+
+static void cs5530_set_dmamode(struct ata_port *ap, struct ata_device *adev)
+{
+ unsigned long base = ( ap->ioaddr.bmdma_addr & ~0x0F) + 0x20 + 0x10 * ap->port_no;
+ u32 tuning, timing = 0;
+ u8 reg;
+
+ /* Find out which table to use */
+ tuning = inl(base + 0x04);
+
+ switch(adev->dma_mode) {
+ case XFER_UDMA_0:
+ timing = 0x00921250;break;
+ case XFER_UDMA_1:
+ timing = 0x00911140;break;
+ case XFER_UDMA_2:
+ timing = 0x00911030;break;
+ case XFER_MW_DMA_0:
+ timing = 0x00077771;break;
+ case XFER_MW_DMA_1:
+ timing = 0x00012121;break;
+ case XFER_MW_DMA_2:
+ timing = 0x00002020;break;
+ default:
+ BUG();
+ }
+ /* Merge in the PIO format bit */
+ timing |= (tuning & 0x80000000UL);
+ if (adev->devno == 0) /* Master */
+ outl(timing, base + 0x04);
+ else {
+ if (timing & 0x00100000)
+ tuning |= 0x00100000; /* UDMA for both */
+ else
+ tuning &= ~0x00100000; /* MWDMA for both */
+ outl(tuning, base + 0x04);
+ outl(timing, base + 0x0C);
+ }
+
+ /* Set the DMA capable bit in the BMDMA area */
+ reg = inb(ap->ioaddr.bmdma_addr + ATA_DMA_STATUS);
+ reg |= (1 << (5 + adev->devno));
+ outb(reg, ap->ioaddr.bmdma_addr + ATA_DMA_STATUS);
+
+ /* Remember the last DMA setup we did */
+
+ ap->private_data = adev;
+}
+
+/**
+ * cs5530_qc_issue_prot - command issue
+ * @qc: command pending
+ *
+ * Called when the libata layer is about to issue a command. We wrap
+ * this interface so that we can load the correct ATA timings if
+ * neccessary. Specifically we have a problem that there is only
+ * one MWDMA/UDMA bit.
+ */
+
+static unsigned int cs5530_qc_issue_prot(struct ata_queued_cmd *qc)
+{
+ struct ata_port *ap = qc->ap;
+ struct ata_device *adev = qc->dev;
+ struct ata_device *prev = ap->private_data;
+
+ /* See if the DMA settings could be wrong */
+ if (adev->dma_mode != 0 && adev != prev && prev != NULL) {
+ /* Maybe, but do the channels match MWDMA/UDMA ? */
+ if ((adev->dma_mode >= XFER_UDMA_0 && prev->dma_mode < XFER_UDMA_0) ||
+ (adev->dma_mode < XFER_UDMA_0 && prev->dma_mode >= XFER_UDMA_0))
+ /* Switch the mode bits */
+ cs5530_set_dmamode(ap, adev);
+ }
+
+ return ata_qc_issue_prot(qc);
+}
+
+static int cs5530_pre_reset(struct ata_port *ap)
+{
+ ap->cbl = ATA_CBL_PATA40;
+ return ata_std_prereset(ap);
+}
+
+static void cs5530_error_handler(struct ata_port *ap)
+{
+ return ata_bmdma_drive_eh(ap, cs5530_pre_reset, ata_std_softreset, NULL, ata_std_postreset);
+}
+
+
+static struct scsi_host_template cs5530_sht = {
+ .module = THIS_MODULE,
+ .name = DRV_NAME,
+ .ioctl = ata_scsi_ioctl,
+ .queuecommand = ata_scsi_queuecmd,
+ .can_queue = ATA_DEF_QUEUE,
+ .this_id = ATA_SHT_THIS_ID,
+ .sg_tablesize = LIBATA_MAX_PRD,
+ .max_sectors = ATA_MAX_SECTORS,
+ .cmd_per_lun = ATA_SHT_CMD_PER_LUN,
+ .emulated = ATA_SHT_EMULATED,
+ .use_clustering = ATA_SHT_USE_CLUSTERING,
+ .proc_name = DRV_NAME,
+ .dma_boundary = ATA_DMA_BOUNDARY,
+ .slave_configure = ata_scsi_slave_config,
+ .bios_param = ata_std_bios_param,
+};
+
+static struct ata_port_operations cs5530_port_ops = {
+ .port_disable = ata_port_disable,
+ .set_piomode = cs5530_set_piomode,
+ .set_dmamode = cs5530_set_dmamode,
+ .mode_filter = ata_pci_default_filter,
+
+ .tf_load = ata_tf_load,
+ .tf_read = ata_tf_read,
+ .check_status = ata_check_status,
+ .exec_command = ata_exec_command,
+ .dev_select = ata_std_dev_select,
+
+ .bmdma_setup = ata_bmdma_setup,
+ .bmdma_start = ata_bmdma_start,
+ .bmdma_stop = ata_bmdma_stop,
+ .bmdma_status = ata_bmdma_status,
+
+ .freeze = ata_bmdma_freeze,
+ .thaw = ata_bmdma_thaw,
+ .error_handler = cs5530_error_handler,
+ .post_internal_cmd = ata_bmdma_post_internal_cmd,
+
+ .qc_prep = ata_qc_prep,
+ .qc_issue = cs5530_qc_issue_prot,
+ .eng_timeout = ata_eng_timeout,
+ .data_xfer = ata_pio_data_xfer,
+
+ .irq_handler = ata_interrupt,
+ .irq_clear = ata_bmdma_irq_clear,
+
+ .port_start = ata_port_start,
+ .port_stop = ata_port_stop,
+ .host_stop = ata_host_stop
+};
+
+static struct dmi_system_id palmax_dmi_table[] = {
+ {
+ .ident = "Palmax PD1100",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Cyrix"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Caddis"),
+ },
+ },
+ { }
+};
+
+static int cs5530_is_palmax(void)
+{
+ if (dmi_check_system(palmax_dmi_table)) {
+ printk(KERN_INFO "Palmax PD1100: Disabling DMA on docking port.\n");
+ return 1;
+ }
+ return 0;
+}
+
+/**
+ * cs5530_init_one - Initialise a CS5530
+ * @dev: PCI device
+ * @id: Entry in match table
+ *
+ * Install a driver for the newly found CS5530 companion chip. Most of
+ * this is just housekeeping. We have to set the chip up correctly and
+ * turn off various bits of emulation magic.
+ */
+
+static int cs5530_init_one(struct pci_dev *dev, const struct pci_device_id *id)
+{
+ int compiler_warning_pointless_fix;
+ struct pci_dev *master_0 = NULL, *cs5530_0 = NULL;
+ static struct ata_port_info info = {
+ .sht = &cs5530_sht,
+ .flags = ATA_FLAG_SLAVE_POSS|ATA_FLAG_SRST,
+ .pio_mask = 0x1f,
+ .mwdma_mask = 0x07,
+ .udma_mask = 0x07,
+ .port_ops = &cs5530_port_ops
+ };
+ /* The docking connector doesn't do UDMA, and it seems not MWDMA */
+ static struct ata_port_info info_palmax_secondary = {
+ .sht = &cs5530_sht,
+ .flags = ATA_FLAG_SLAVE_POSS|ATA_FLAG_SRST,
+ .pio_mask = 0x1f,
+ .port_ops = &cs5530_port_ops
+ };
+ static struct ata_port_info *port_info[2] = { &info, &info };
+
+ dev = NULL;
+ while ((dev = pci_get_device(PCI_VENDOR_ID_CYRIX, PCI_ANY_ID, dev)) != NULL) {
+ switch (dev->device) {
+ case PCI_DEVICE_ID_CYRIX_PCI_MASTER:
+ master_0 = pci_dev_get(dev);
+ break;
+ case PCI_DEVICE_ID_CYRIX_5530_LEGACY:
+ cs5530_0 = pci_dev_get(dev);
+ break;
+ }
+ }
+ if (!master_0) {
+ printk(KERN_ERR DRV_NAME ": unable to locate PCI MASTER function\n");
+ goto fail_put;
+ }
+ if (!cs5530_0) {
+ printk(KERN_ERR DRV_NAME ": unable to locate CS5530 LEGACY function\n");
+ goto fail_put;
+ }
+
+ pci_set_master(cs5530_0);
+ compiler_warning_pointless_fix = pci_set_mwi(cs5530_0);
+
+ /*
+ * Set PCI CacheLineSize to 16-bytes:
+ * --> Write 0x04 into 8-bit PCI CACHELINESIZE reg of function 0 of the cs5530
+ *
+ * Note: This value is constant because the 5530 is only a Geode companion
+ */
+
+ pci_write_config_byte(cs5530_0, PCI_CACHE_LINE_SIZE, 0x04);
+
+ /*
+ * Disable trapping of UDMA register accesses (Win98 hack):
+ * --> Write 0x5006 into 16-bit reg at offset 0xd0 of function 0 of the cs5530
+ */
+
+ pci_write_config_word(cs5530_0, 0xd0, 0x5006);
+
+ /*
+ * Bit-1 at 0x40 enables MemoryWriteAndInvalidate on internal X-bus:
+ * The other settings are what is necessary to get the register
+ * into a sane state for IDE DMA operation.
+ */
+
+ pci_write_config_byte(master_0, 0x40, 0x1e);
+
+ /*
+ * Set max PCI burst size (16-bytes seems to work best):
+ * 16bytes: set bit-1 at 0x41 (reg value of 0x16)
+ * all others: clear bit-1 at 0x41, and do:
+ * 128bytes: OR 0x00 at 0x41
+ * 256bytes: OR 0x04 at 0x41
+ * 512bytes: OR 0x08 at 0x41
+ * 1024bytes: OR 0x0c at 0x41
+ */
+
+ pci_write_config_byte(master_0, 0x41, 0x14);
+
+ /*
+ * These settings are necessary to get the chip
+ * into a sane state for IDE DMA operation.
+ */
+
+ pci_write_config_byte(master_0, 0x42, 0x00);
+ pci_write_config_byte(master_0, 0x43, 0xc1);
+
+ pci_dev_put(master_0);
+ pci_dev_put(cs5530_0);
+
+ if (cs5530_is_palmax())
+ port_info[1] = &info_palmax_secondary;
+
+ /* Now kick off ATA set up */
+ return ata_pci_init_one(dev, port_info, 2);
+
+fail_put:
+ if (master_0)
+ pci_dev_put(master_0);
+ if (cs5530_0)
+ pci_dev_put(cs5530_0);
+ return -ENODEV;
+}
+
+static struct pci_device_id cs5530[] = {
+ { PCI_DEVICE(PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5530_IDE), },
+ { 0, },
+};
+
+static struct pci_driver cs5530_pci_driver = {
+ .name = DRV_NAME,
+ .id_table = cs5530,
+ .probe = cs5530_init_one,
+ .remove = ata_pci_remove_one
+};
+
+static int __init cs5530_init(void)
+{
+ return pci_register_driver(&cs5530_pci_driver);
+}
+
+
+static void __exit cs5530_exit(void)
+{
+ pci_unregister_driver(&cs5530_pci_driver);
+}
+
+
+MODULE_AUTHOR("Alan Cox");
+MODULE_DESCRIPTION("low-level driver for the Cyrix/NS/AMD 5530");
+MODULE_LICENSE("GPL");
+MODULE_DEVICE_TABLE(pci, cs5530);
+MODULE_VERSION(DRV_VERSION);
+
+module_init(cs5530_init);
+module_exit(cs5530_exit);