diff options
Diffstat (limited to 'drivers/ata/Kconfig')
| -rw-r--r-- | drivers/ata/Kconfig | 486 |
1 files changed, 486 insertions, 0 deletions
diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig new file mode 100644 index 00000000000..99837d932f3 --- /dev/null +++ b/drivers/ata/Kconfig @@ -0,0 +1,486 @@ +# +# SATA/PATA driver configuration +# + +menu "Serial ATA (prod) and Parallel ATA (experimental) drivers" + +config ATA + tristate "ATA device support" + depends on !(M32R || M68K) || BROKEN + depends on !SUN4 || BROKEN + select SCSI + ---help--- + If you want to use a ATA hard disk, ATA tape drive, ATA CD-ROM or + any other ATA device under Linux, say Y and make sure that you know + the name of your ATA host adapter (the card inside your computer + that "speaks" the ATA protocol, also called ATA controller), + because you will be asked for it. + +if ATA + +config SATA_AHCI + tristate "AHCI SATA support" + depends on PCI + help + This option enables support for AHCI Serial ATA. + + If unsure, say N. + +config SATA_SVW + tristate "ServerWorks Frodo / Apple K2 SATA support" + depends on PCI + help + This option enables support for Broadcom/Serverworks/Apple K2 + SATA support. + + If unsure, say N. + +config ATA_PIIX + tristate "Intel PIIX/ICH SATA support" + depends on PCI + help + This option enables support for ICH5/6/7/8 Serial ATA. + If PATA support was enabled previously, this enables + support for select Intel PIIX/ICH PATA host controllers. + + If unsure, say N. + +config SATA_MV + tristate "Marvell SATA support (HIGHLY EXPERIMENTAL)" + depends on PCI && EXPERIMENTAL + help + This option enables support for the Marvell Serial ATA family. + Currently supports 88SX[56]0[48][01] chips. + + If unsure, say N. + +config SATA_NV + tristate "NVIDIA SATA support" + depends on PCI + help + This option enables support for NVIDIA Serial ATA. + + If unsure, say N. + +config PDC_ADMA + tristate "Pacific Digital ADMA support" + depends on PCI + help + This option enables support for Pacific Digital ADMA controllers + + If unsure, say N. + +config SATA_QSTOR + tristate "Pacific Digital SATA QStor support" + depends on PCI + help + This option enables support for Pacific Digital Serial ATA QStor. + + If unsure, say N. + +config SATA_PROMISE + tristate "Promise SATA TX2/TX4 support" + depends on PCI + help + This option enables support for Promise Serial ATA TX2/TX4. + + If unsure, say N. + +config SATA_SX4 + tristate "Promise SATA SX4 support" + depends on PCI && EXPERIMENTAL + help + This option enables support for Promise Serial ATA SX4. + + If unsure, say N. + +config SATA_SIL + tristate "Silicon Image SATA support" + depends on PCI + help + This option enables support for Silicon Image Serial ATA. + + If unsure, say N. + +config SATA_SIL24 + tristate "Silicon Image 3124/3132 SATA support" + depends on PCI + help + This option enables support for Silicon Image 3124/3132 Serial ATA. + + If unsure, say N. + +config SATA_SIS + tristate "SiS 964/180 SATA support" + depends on PCI + help + This option enables support for SiS Serial ATA 964/180. + + If unsure, say N. + +config SATA_ULI + tristate "ULi Electronics SATA support" + depends on PCI + help + This option enables support for ULi Electronics SATA. + + If unsure, say N. + +config SATA_VIA + tristate "VIA SATA support" + depends on PCI + help + This option enables support for VIA Serial ATA. + + If unsure, say N. + +config SATA_VITESSE + tristate "VITESSE VSC-7174 / INTEL 31244 SATA support" + depends on PCI + help + This option enables support for Vitesse VSC7174 and Intel 31244 Serial ATA. + + If unsure, say N. + +config SATA_INTEL_COMBINED + bool + depends on IDE=y && !BLK_DEV_IDE_SATA && (SATA_AHCI || ATA_PIIX) + default y + +config PATA_ALI + tristate "ALi PATA support (Experimental)" + depends on PCI && EXPERIMENTAL + help + This option enables support for the ALi ATA interfaces + found on the many ALi chipsets. + + If unsure, say N. + +config PATA_AMD + tristate "AMD/NVidia PATA support (Experimental)" + depends on PCI + help + This option enables support for the AMD and NVidia PATA + interfaces found on the chipsets for Athlon/Athlon64. + + If unsure, say N. + +config PATA_ARTOP + tristate "ARTOP 6210/6260 PATA support (Experimental)" + depends on PCI && EXPERIMENTAL + help + This option enables support for ARTOP PATA controllers. + + If unsure, say N. + +config PATA_ATIIXP + tristate "ATI PATA support (Experimental)" + depends on PCI && EXPERIMENTAL + help + This option enables support for the ATI ATA interfaces + found on the many ATI chipsets. + + If unsure, say N. + +config PATA_CMD64X + tristate "CMD64x PATA support (Very Experimental)" + depends on PCI&& EXPERIMENTAL + help + This option enables support for the CMD64x series chips + except for the CMD640. + + If unsure, say N. + +config PATA_CS5520 + tristate "CS5510/5520 PATA support" + depends on PCI + help + This option enables support for the Cyrix 5510/5520 + companion chip used with the MediaGX/Geode processor family. + + If unsure, say N. + +config PATA_CS5530 + tristate "CS5530 PATA support (Experimental)" + depends on PCI && EXPERIMENTAL + help + This option enables support for the Cyrix/NatSemi/AMD CS5530 + companion chip used with the MediaGX/Geode processor family. + + If unsure, say N. + +config PATA_CS5535 + tristate "CS5535 PATA support (Experimental)" + depends on PCI && X86 && !X86_64 && EXPERIMENTAL + help + This option enables support for the NatSemi/AMD CS5535 + companion chip used with the Geode processor family. + + If unsure, say N. + +config PATA_CYPRESS + tristate "Cypress CY82C693 PATA support (Very Experimental)" + depends on PCI && EXPERIMENTAL + help + This option enables support for the Cypress/Contaq CY82C693 + chipset found in some Alpha systems + + If unsure, say N. + +config PATA_EFAR + tristate "EFAR SLC90E66 support" + depends on PCI + help + This option enables support for the EFAR SLC90E66 + IDE controller found on some older machines. + + If unsure, say N. + +config ATA_GENERIC + tristate "Generic ATA support" + depends on PCI + help + This option enables support for generic BIOS configured + ATA controllers via the new ATA layer + + If unsure, say N. + +config PATA_HPT366 + tristate "HPT 366/368 PATA support (Very Experimental)" + depends on PCI && EXPERIMENTAL + help + This option enables support for the HPT 366 and 368 + PATA controllers via the new ATA layer. + + If unsure, say N. + +config PATA_HPT37X + tristate "HPT 370/370A/371/372/374/302 PATA support (Very Experimental)" + depends on PCI && EXPERIMENTAL + help + This option enables support for the majority of the later HPT + PATA controllers via the new ATA layer. + + If unsure, say N. + +config PATA_HPT3X2N + tristate "HPT 372N/302N PATA support (Very Experimental)" + depends on PCI && EXPERIMENTAL + help + This option enables support for the N variant HPT PATA + controllers via the new ATA layer + + If unsure, say N. + +config PATA_HPT3X3 + tristate "HPT 343/363 PATA support (Experimental)" + depends on PCI + help + This option enables support for the HPT 343/363 + PATA controllers via the new ATA layer + + If unsure, say N. + +config PATA_ISAPNP + tristate "ISA Plug and Play PATA support (Very Experimental)" + depends on EXPERIMENTAL && ISAPNP + help + This option enables support for ISA plug & play ATA + controllers such as those found on old soundcards. + + If unsure, say N. + +config PATA_IT821X + tristate "IT821x PATA support (Experimental)" + depends on PCI && EXPERIMENTAL + help + This option enables support for the ITE 8211 and 8212 + PATA controllers via the new ATA layer, including RAID + mode. + + If unsure, say N. + +config PATA_JMICRON + tristate "JMicron PATA support" + depends on PCI + help + Enable support for the JMicron IDE controller, via the new + ATA layer. + + If unsure, say N. + +config PATA_LEGACY + tristate "Legacy ISA PATA support (Experimental)" + depends on PCI && EXPERIMENTAL + help + This option enables support for ISA/VLB bus legacy PATA + ports and allows them to be accessed via the new ATA layer. + + If unsure, say N. + +config PATA_TRIFLEX + tristate "Compaq Triflex PATA support" + depends on PCI + help + Enable support for the Compaq 'Triflex' IDE controller as found + on many Compaq Pentium-Pro systems, via the new ATA layer. + + If unsure, say N. + +config PATA_MPIIX + tristate "Intel PATA MPIIX support" + depends on PCI + help + This option enables support for MPIIX PATA support. + + If unsure, say N. + +config PATA_OLDPIIX + tristate "Intel PATA old PIIX support (Experimental)" + depends on PCI && EXPERIMENTAL + help + This option enables support for old(?) PIIX PATA support. + + If unsure, say N. + +config PATA_NETCELL + tristate "NETCELL Revolution RAID support" + depends on PCI + help + This option enables support for the Netcell Revolution RAID + PATA controller. + + If unsure, say N. + +config PATA_NS87410 + tristate "Nat Semi NS87410 PATA support (Experimental)" + depends on PCI && EXPERIMENTAL + help + This option enables support for the National Semiconductor + NS87410 PCI-IDE controller. + + If unsure, say N. + +config PATA_OPTI + tristate "OPTI621/6215 PATA support (Very Experimental)" + depends on PCI && EXPERIMENTAL + help + This option enables full PIO support for the early Opti ATA + controllers found on some old motherboards. + + If unsure, say N. + +config PATA_OPTIDMA + tristate "OPTI FireStar PATA support (Veyr Experimental)" + depends on PCI && EXPERIMENTAL + help + This option enables DMA/PIO support for the later OPTi + controllers found on some old motherboards and in some + latops + + If unsure, say N. + +config PATA_PCMCIA + tristate "PCMCIA PATA support" + depends on PCMCIA + help + This option enables support for PCMCIA ATA interfaces, including + compact flash card adapters via the new ATA layer. + + If unsure, say N. + +config PATA_PDC_OLD + tristate "Older Promise PATA controller support (Very Experimental)" + depends on PCI && EXPERIMENTAL + help + This option enables support for the Promise 20246, 20262, 20263, + 20265 and 20267 adapters. + + If unsure, say N. + +config PATA_QDI + tristate "QDI VLB PATA support" + help + Support for QDI 6500 and 6580 PATA controllers on VESA local bus. + +config PATA_RADISYS + tristate "RADISYS 82600 PATA support (Very experimental)" + depends on PCI && EXPERIMENTAL + help + This option enables support for the RADISYS 82600 + PATA controllers via the new ATA layer + + If unsure, say N. + +config PATA_RZ1000 + tristate "PC Tech RZ1000 PATA support" + depends on PCI + help + This option enables basic support for the PC Tech RZ1000/1 + PATA controllers via the new ATA layer + + If unsure, say N. + +config PATA_SC1200 + tristate "SC1200 PATA support (Raving Lunatic)" + depends on PCI && EXPERIMENTAL + help + This option enables support for the NatSemi/AMD SC1200 SoC + companion chip used with the Geode processor family. + + If unsure, say N. + +config PATA_SERVERWORKS + tristate "SERVERWORKS OSB4/CSB5/CSB6/HT1000 PATA support (Experimental)" + depends on PCI && EXPERIMENTAL + help + This option enables support for the Serverworks OSB4/CSB5/CSB6 and + HT1000 PATA controllers, via the new ATA layer. + + If unsure, say N. + +config PATA_PDC2027X + tristate "Promise PATA 2027x support" + depends on PCI + help + This option enables support for Promise PATA pdc20268 to pdc20277 host adapters. + + If unsure, say N. + +config PATA_SIL680 + tristate "CMD / Silicon Image 680 PATA support" + depends on PCI + help + This option enables support for CMD / Silicon Image 680 PATA. + + If unsure, say N. + +config PATA_SIS + tristate "SiS PATA support (Experimental)" + depends on PCI && EXPERIMENTAL + help + This option enables support for SiS PATA controllers + + If unsure, say N. + +config PATA_VIA + tristate "VIA PATA support" + depends on PCI + help + This option enables support for the VIA PATA interfaces + found on the many VIA chipsets. + + If unsure, say N. + +config PATA_WINBOND + tristate "Winbond SL82C105 PATA support" + depends on PCI + help + This option enables support for SL82C105 PATA devices found in the + Netwinder and some other systems + + If unsure, say N. + +endif +endmenu + |