summaryrefslogtreecommitdiff
path: root/arch/i386/mach-voyager/voyager_basic.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/i386/mach-voyager/voyager_basic.c')
-rw-r--r--arch/i386/mach-voyager/voyager_basic.c325
1 files changed, 325 insertions, 0 deletions
diff --git a/arch/i386/mach-voyager/voyager_basic.c b/arch/i386/mach-voyager/voyager_basic.c
new file mode 100644
index 00000000000..602aea240e9
--- /dev/null
+++ b/arch/i386/mach-voyager/voyager_basic.c
@@ -0,0 +1,325 @@
+/* Copyright (C) 1999,2001
+ *
+ * Author: J.E.J.Bottomley@HansenPartnership.com
+ *
+ * linux/arch/i386/kernel/voyager.c
+ *
+ * This file contains all the voyager specific routines for getting
+ * initialisation of the architecture to function. For additional
+ * features see:
+ *
+ * voyager_cat.c - Voyager CAT bus interface
+ * voyager_smp.c - Voyager SMP hal (emulates linux smp.c)
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/sched.h>
+#include <linux/ptrace.h>
+#include <linux/ioport.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/reboot.h>
+#include <linux/sysrq.h>
+#include <asm/io.h>
+#include <asm/voyager.h>
+#include <asm/vic.h>
+#include <linux/pm.h>
+#include <linux/irq.h>
+#include <asm/tlbflush.h>
+#include <asm/arch_hooks.h>
+
+/*
+ * Power off function, if any
+ */
+void (*pm_power_off)(void);
+
+int voyager_level = 0;
+
+struct voyager_SUS *voyager_SUS = NULL;
+
+#ifdef CONFIG_SMP
+static void
+voyager_dump(int dummy1, struct pt_regs *dummy2, struct tty_struct *dummy3)
+{
+ /* get here via a sysrq */
+ voyager_smp_dump();
+}
+
+static struct sysrq_key_op sysrq_voyager_dump_op = {
+ .handler = voyager_dump,
+ .help_msg = "Voyager",
+ .action_msg = "Dump Voyager Status",
+};
+#endif
+
+void
+voyager_detect(struct voyager_bios_info *bios)
+{
+ if(bios->len != 0xff) {
+ int class = (bios->class_1 << 8)
+ | (bios->class_2 & 0xff);
+
+ printk("Voyager System detected.\n"
+ " Class %x, Revision %d.%d\n",
+ class, bios->major, bios->minor);
+ if(class == VOYAGER_LEVEL4)
+ voyager_level = 4;
+ else if(class < VOYAGER_LEVEL5_AND_ABOVE)
+ voyager_level = 3;
+ else
+ voyager_level = 5;
+ printk(" Architecture Level %d\n", voyager_level);
+ if(voyager_level < 4)
+ printk("\n**WARNING**: Voyager HAL only supports Levels 4 and 5 Architectures at the moment\n\n");
+ /* install the power off handler */
+ pm_power_off = voyager_power_off;
+#ifdef CONFIG_SMP
+ register_sysrq_key('v', &sysrq_voyager_dump_op);
+#endif
+ } else {
+ printk("\n\n**WARNING**: No Voyager Subsystem Found\n");
+ }
+}
+
+void
+voyager_system_interrupt(int cpl, void *dev_id, struct pt_regs *regs)
+{
+ printk("Voyager: detected system interrupt\n");
+}
+
+/* Routine to read information from the extended CMOS area */
+__u8
+voyager_extended_cmos_read(__u16 addr)
+{
+ outb(addr & 0xff, 0x74);
+ outb((addr >> 8) & 0xff, 0x75);
+ return inb(0x76);
+}
+
+/* internal definitions for the SUS Click Map of memory */
+
+#define CLICK_ENTRIES 16
+#define CLICK_SIZE 4096 /* click to byte conversion for Length */
+
+typedef struct ClickMap {
+ struct Entry {
+ __u32 Address;
+ __u32 Length;
+ } Entry[CLICK_ENTRIES];
+} ClickMap_t;
+
+
+/* This routine is pretty much an awful hack to read the bios clickmap by
+ * mapping it into page 0. There are usually three regions in the map:
+ * Base Memory
+ * Extended Memory
+ * zero length marker for end of map
+ *
+ * Returns are 0 for failure and 1 for success on extracting region.
+ */
+int __init
+voyager_memory_detect(int region, __u32 *start, __u32 *length)
+{
+ int i;
+ int retval = 0;
+ __u8 cmos[4];
+ ClickMap_t *map;
+ unsigned long map_addr;
+ unsigned long old;
+
+ if(region >= CLICK_ENTRIES) {
+ printk("Voyager: Illegal ClickMap region %d\n", region);
+ return 0;
+ }
+
+ for(i = 0; i < sizeof(cmos); i++)
+ cmos[i] = voyager_extended_cmos_read(VOYAGER_MEMORY_CLICKMAP + i);
+
+ map_addr = *(unsigned long *)cmos;
+
+ /* steal page 0 for this */
+ old = pg0[0];
+ pg0[0] = ((map_addr & PAGE_MASK) | _PAGE_RW | _PAGE_PRESENT);
+ local_flush_tlb();
+ /* now clear everything out but page 0 */
+ map = (ClickMap_t *)(map_addr & (~PAGE_MASK));
+
+ /* zero length is the end of the clickmap */
+ if(map->Entry[region].Length != 0) {
+ *length = map->Entry[region].Length * CLICK_SIZE;
+ *start = map->Entry[region].Address;
+ retval = 1;
+ }
+
+ /* replace the mapping */
+ pg0[0] = old;
+ local_flush_tlb();
+ return retval;
+}
+
+/* voyager specific handling code for timer interrupts. Used to hand
+ * off the timer tick to the SMP code, since the VIC doesn't have an
+ * internal timer (The QIC does, but that's another story). */
+void
+voyager_timer_interrupt(struct pt_regs *regs)
+{
+ if((jiffies & 0x3ff) == 0) {
+
+ /* There seems to be something flaky in either
+ * hardware or software that is resetting the timer 0
+ * count to something much higher than it should be
+ * This seems to occur in the boot sequence, just
+ * before root is mounted. Therefore, every 10
+ * seconds or so, we sanity check the timer zero count
+ * and kick it back to where it should be.
+ *
+ * FIXME: This is the most awful hack yet seen. I
+ * should work out exactly what is interfering with
+ * the timer count settings early in the boot sequence
+ * and swiftly introduce it to something sharp and
+ * pointy. */
+ __u16 val;
+ extern spinlock_t i8253_lock;
+
+ spin_lock(&i8253_lock);
+
+ outb_p(0x00, 0x43);
+ val = inb_p(0x40);
+ val |= inb(0x40) << 8;
+ spin_unlock(&i8253_lock);
+
+ if(val > LATCH) {
+ printk("\nVOYAGER: countdown timer value too high (%d), resetting\n\n", val);
+ spin_lock(&i8253_lock);
+ outb(0x34,0x43);
+ outb_p(LATCH & 0xff , 0x40); /* LSB */
+ outb(LATCH >> 8 , 0x40); /* MSB */
+ spin_unlock(&i8253_lock);
+ }
+ }
+#ifdef CONFIG_SMP
+ smp_vic_timer_interrupt(regs);
+#endif
+}
+
+void
+voyager_power_off(void)
+{
+ printk("VOYAGER Power Off\n");
+
+ if(voyager_level == 5) {
+ voyager_cat_power_off();
+ } else if(voyager_level == 4) {
+ /* This doesn't apparently work on most L4 machines,
+ * but the specs say to do this to get automatic power
+ * off. Unfortunately, if it doesn't power off the
+ * machine, it ends up doing a cold restart, which
+ * isn't really intended, so comment out the code */
+#if 0
+ int port;
+
+
+ /* enable the voyager Configuration Space */
+ outb((inb(VOYAGER_MC_SETUP) & 0xf0) | 0x8,
+ VOYAGER_MC_SETUP);
+ /* the port for the power off flag is an offset from the
+ floating base */
+ port = (inb(VOYAGER_SSPB_RELOCATION_PORT) << 8) + 0x21;
+ /* set the power off flag */
+ outb(inb(port) | 0x1, port);
+#endif
+ }
+ /* and wait for it to happen */
+ for(;;) {
+ __asm("cli");
+ __asm("hlt");
+ }
+}
+
+/* copied from process.c */
+static inline void
+kb_wait(void)
+{
+ int i;
+
+ for (i=0; i<0x10000; i++)
+ if ((inb_p(0x64) & 0x02) == 0)
+ break;
+}
+
+void
+machine_restart(char *cmd)
+{
+ printk("Voyager Warm Restart\n");
+ kb_wait();
+
+ if(voyager_level == 5) {
+ /* write magic values to the RTC to inform system that
+ * shutdown is beginning */
+ outb(0x8f, 0x70);
+ outb(0x5 , 0x71);
+
+ udelay(50);
+ outb(0xfe,0x64); /* pull reset low */
+ } else if(voyager_level == 4) {
+ __u16 catbase = inb(VOYAGER_SSPB_RELOCATION_PORT)<<8;
+ __u8 basebd = inb(VOYAGER_MC_SETUP);
+
+ outb(basebd | 0x08, VOYAGER_MC_SETUP);
+ outb(0x02, catbase + 0x21);
+ }
+ for(;;) {
+ asm("cli");
+ asm("hlt");
+ }
+}
+
+EXPORT_SYMBOL(machine_restart);
+
+void
+mca_nmi_hook(void)
+{
+ __u8 dumpval __attribute__((unused)) = inb(0xf823);
+ __u8 swnmi __attribute__((unused)) = inb(0xf813);
+
+ /* FIXME: assume dump switch pressed */
+ /* check to see if the dump switch was pressed */
+ VDEBUG(("VOYAGER: dumpval = 0x%x, swnmi = 0x%x\n", dumpval, swnmi));
+ /* clear swnmi */
+ outb(0xff, 0xf813);
+ /* tell SUS to ignore dump */
+ if(voyager_level == 5 && voyager_SUS != NULL) {
+ if(voyager_SUS->SUS_mbox == VOYAGER_DUMP_BUTTON_NMI) {
+ voyager_SUS->kernel_mbox = VOYAGER_NO_COMMAND;
+ voyager_SUS->kernel_flags |= VOYAGER_OS_IN_PROGRESS;
+ udelay(1000);
+ voyager_SUS->kernel_mbox = VOYAGER_IGNORE_DUMP;
+ voyager_SUS->kernel_flags &= ~VOYAGER_OS_IN_PROGRESS;
+ }
+ }
+ printk(KERN_ERR "VOYAGER: Dump switch pressed, printing CPU%d tracebacks\n", smp_processor_id());
+ show_stack(NULL, NULL);
+ show_state();
+}
+
+
+
+void
+machine_halt(void)
+{
+ /* treat a halt like a power off */
+ machine_power_off();
+}
+
+EXPORT_SYMBOL(machine_halt);
+
+void machine_power_off(void)
+{
+ if (pm_power_off)
+ pm_power_off();
+}
+
+EXPORT_SYMBOL(machine_power_off);