summaryrefslogtreecommitdiff
path: root/arch/arm/mach-sa1100/dma.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-sa1100/dma.c')
-rw-r--r--arch/arm/mach-sa1100/dma.c348
1 files changed, 348 insertions, 0 deletions
diff --git a/arch/arm/mach-sa1100/dma.c b/arch/arm/mach-sa1100/dma.c
new file mode 100644
index 00000000000..be0e4427bec
--- /dev/null
+++ b/arch/arm/mach-sa1100/dma.c
@@ -0,0 +1,348 @@
+/*
+ * arch/arm/kernel/dma-sa1100.c
+ *
+ * Support functions for the SA11x0 internal DMA channels.
+ *
+ * Copyright (C) 2000, 2001 by Nicolas Pitre
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/spinlock.h>
+#include <linux/errno.h>
+
+#include <asm/system.h>
+#include <asm/irq.h>
+#include <asm/hardware.h>
+#include <asm/dma.h>
+
+
+#undef DEBUG
+#ifdef DEBUG
+#define DPRINTK( s, arg... ) printk( "dma<%p>: " s, regs , ##arg )
+#else
+#define DPRINTK( x... )
+#endif
+
+
+typedef struct {
+ const char *device_id; /* device name */
+ u_long device; /* this channel device, 0 if unused*/
+ dma_callback_t callback; /* to call when DMA completes */
+ void *data; /* ... with private data ptr */
+} sa1100_dma_t;
+
+static sa1100_dma_t dma_chan[SA1100_DMA_CHANNELS];
+
+static spinlock_t dma_list_lock;
+
+
+static irqreturn_t dma_irq_handler(int irq, void *dev_id, struct pt_regs *regs)
+{
+ dma_regs_t *dma_regs = dev_id;
+ sa1100_dma_t *dma = dma_chan + (((u_int)dma_regs >> 5) & 7);
+ int status = dma_regs->RdDCSR;
+
+ if (status & (DCSR_ERROR)) {
+ printk(KERN_CRIT "DMA on \"%s\" caused an error\n", dma->device_id);
+ dma_regs->ClrDCSR = DCSR_ERROR;
+ }
+
+ dma_regs->ClrDCSR = status & (DCSR_DONEA | DCSR_DONEB);
+ if (dma->callback) {
+ if (status & DCSR_DONEA)
+ dma->callback(dma->data);
+ if (status & DCSR_DONEB)
+ dma->callback(dma->data);
+ }
+ return IRQ_HANDLED;
+}
+
+
+/**
+ * sa1100_request_dma - allocate one of the SA11x0's DMA chanels
+ * @device: The SA11x0 peripheral targeted by this request
+ * @device_id: An ascii name for the claiming device
+ * @callback: Function to be called when the DMA completes
+ * @data: A cookie passed back to the callback function
+ * @dma_regs: Pointer to the location of the allocated channel's identifier
+ *
+ * This function will search for a free DMA channel and returns the
+ * address of the hardware registers for that channel as the channel
+ * identifier. This identifier is written to the location pointed by
+ * @dma_regs. The list of possible values for @device are listed into
+ * linux/include/asm-arm/arch-sa1100/dma.h as a dma_device_t enum.
+ *
+ * Note that reading from a port and writing to the same port are
+ * actually considered as two different streams requiring separate
+ * DMA registrations.
+ *
+ * The @callback function is called from interrupt context when one
+ * of the two possible DMA buffers in flight has terminated. That
+ * function has to be small and efficient while posponing more complex
+ * processing to a lower priority execution context.
+ *
+ * If no channels are available, or if the desired @device is already in
+ * use by another DMA channel, then an error code is returned. This
+ * function must be called before any other DMA calls.
+ **/
+
+int sa1100_request_dma (dma_device_t device, const char *device_id,
+ dma_callback_t callback, void *data,
+ dma_regs_t **dma_regs)
+{
+ sa1100_dma_t *dma = NULL;
+ dma_regs_t *regs;
+ int i, err;
+
+ *dma_regs = NULL;
+
+ err = 0;
+ spin_lock(&dma_list_lock);
+ for (i = 0; i < SA1100_DMA_CHANNELS; i++) {
+ if (dma_chan[i].device == device) {
+ err = -EBUSY;
+ break;
+ } else if (!dma_chan[i].device && !dma) {
+ dma = &dma_chan[i];
+ }
+ }
+ if (!err) {
+ if (dma)
+ dma->device = device;
+ else
+ err = -ENOSR;
+ }
+ spin_unlock(&dma_list_lock);
+ if (err)
+ return err;
+
+ i = dma - dma_chan;
+ regs = (dma_regs_t *)&DDAR(i);
+ err = request_irq(IRQ_DMA0 + i, dma_irq_handler, SA_INTERRUPT,
+ device_id, regs);
+ if (err) {
+ printk(KERN_ERR
+ "%s: unable to request IRQ %d for %s\n",
+ __FUNCTION__, IRQ_DMA0 + i, device_id);
+ dma->device = 0;
+ return err;
+ }
+
+ *dma_regs = regs;
+ dma->device_id = device_id;
+ dma->callback = callback;
+ dma->data = data;
+
+ regs->ClrDCSR =
+ (DCSR_DONEA | DCSR_DONEB | DCSR_STRTA | DCSR_STRTB |
+ DCSR_IE | DCSR_ERROR | DCSR_RUN);
+ regs->DDAR = device;
+
+ return 0;
+}
+
+
+/**
+ * sa1100_free_dma - free a SA11x0 DMA channel
+ * @regs: identifier for the channel to free
+ *
+ * This clears all activities on a given DMA channel and releases it
+ * for future requests. The @regs identifier is provided by a
+ * successful call to sa1100_request_dma().
+ **/
+
+void sa1100_free_dma(dma_regs_t *regs)
+{
+ int i;
+
+ for (i = 0; i < SA1100_DMA_CHANNELS; i++)
+ if (regs == (dma_regs_t *)&DDAR(i))
+ break;
+ if (i >= SA1100_DMA_CHANNELS) {
+ printk(KERN_ERR "%s: bad DMA identifier\n", __FUNCTION__);
+ return;
+ }
+
+ if (!dma_chan[i].device) {
+ printk(KERN_ERR "%s: Trying to free free DMA\n", __FUNCTION__);
+ return;
+ }
+
+ regs->ClrDCSR =
+ (DCSR_DONEA | DCSR_DONEB | DCSR_STRTA | DCSR_STRTB |
+ DCSR_IE | DCSR_ERROR | DCSR_RUN);
+ free_irq(IRQ_DMA0 + i, regs);
+ dma_chan[i].device = 0;
+}
+
+
+/**
+ * sa1100_start_dma - submit a data buffer for DMA
+ * @regs: identifier for the channel to use
+ * @dma_ptr: buffer physical (or bus) start address
+ * @size: buffer size
+ *
+ * This function hands the given data buffer to the hardware for DMA
+ * access. If another buffer is already in flight then this buffer
+ * will be queued so the DMA engine will switch to it automatically
+ * when the previous one is done. The DMA engine is actually toggling
+ * between two buffers so at most 2 successful calls can be made before
+ * one of them terminates and the callback function is called.
+ *
+ * The @regs identifier is provided by a successful call to
+ * sa1100_request_dma().
+ *
+ * The @size must not be larger than %MAX_DMA_SIZE. If a given buffer
+ * is larger than that then it's the caller's responsibility to split
+ * it into smaller chunks and submit them separately. If this is the
+ * case then a @size of %CUT_DMA_SIZE is recommended to avoid ending
+ * up with too small chunks. The callback function can be used to chain
+ * submissions of buffer chunks.
+ *
+ * Error return values:
+ * %-EOVERFLOW: Given buffer size is too big.
+ * %-EBUSY: Both DMA buffers are already in use.
+ * %-EAGAIN: Both buffers were busy but one of them just completed
+ * but the interrupt handler has to execute first.
+ *
+ * This function returs 0 on success.
+ **/
+
+int sa1100_start_dma(dma_regs_t *regs, dma_addr_t dma_ptr, u_int size)
+{
+ unsigned long flags;
+ u_long status;
+ int ret;
+
+ if (dma_ptr & 3)
+ printk(KERN_WARNING "DMA: unaligned start address (0x%08lx)\n",
+ (unsigned long)dma_ptr);
+
+ if (size > MAX_DMA_SIZE)
+ return -EOVERFLOW;
+
+ local_irq_save(flags);
+ status = regs->RdDCSR;
+
+ /* If both DMA buffers are started, there's nothing else we can do. */
+ if ((status & (DCSR_STRTA | DCSR_STRTB)) == (DCSR_STRTA | DCSR_STRTB)) {
+ DPRINTK("start: st %#x busy\n", status);
+ ret = -EBUSY;
+ goto out;
+ }
+
+ if (((status & DCSR_BIU) && (status & DCSR_STRTB)) ||
+ (!(status & DCSR_BIU) && !(status & DCSR_STRTA))) {
+ if (status & DCSR_DONEA) {
+ /* give a chance for the interrupt to be processed */
+ ret = -EAGAIN;
+ goto out;
+ }
+ regs->DBSA = dma_ptr;
+ regs->DBTA = size;
+ regs->SetDCSR = DCSR_STRTA | DCSR_IE | DCSR_RUN;
+ DPRINTK("start a=%#x s=%d on A\n", dma_ptr, size);
+ } else {
+ if (status & DCSR_DONEB) {
+ /* give a chance for the interrupt to be processed */
+ ret = -EAGAIN;
+ goto out;
+ }
+ regs->DBSB = dma_ptr;
+ regs->DBTB = size;
+ regs->SetDCSR = DCSR_STRTB | DCSR_IE | DCSR_RUN;
+ DPRINTK("start a=%#x s=%d on B\n", dma_ptr, size);
+ }
+ ret = 0;
+
+out:
+ local_irq_restore(flags);
+ return ret;
+}
+
+
+/**
+ * sa1100_get_dma_pos - return current DMA position
+ * @regs: identifier for the channel to use
+ *
+ * This function returns the current physical (or bus) address for the
+ * given DMA channel. If the channel is running i.e. not in a stopped
+ * state then the caller must disable interrupts prior calling this
+ * function and process the returned value before re-enabling them to
+ * prevent races with the completion interrupt handler and the callback
+ * function. The validation of the returned value is the caller's
+ * responsibility as well -- the hardware seems to return out of range
+ * values when the DMA engine completes a buffer.
+ *
+ * The @regs identifier is provided by a successful call to
+ * sa1100_request_dma().
+ **/
+
+dma_addr_t sa1100_get_dma_pos(dma_regs_t *regs)
+{
+ int status;
+
+ /*
+ * We must determine whether buffer A or B is active.
+ * Two possibilities: either we are in the middle of
+ * a buffer, or the DMA controller just switched to the
+ * next toggle but the interrupt hasn't been serviced yet.
+ * The former case is straight forward. In the later case,
+ * we'll do like if DMA is just at the end of the previous
+ * toggle since all registers haven't been reset yet.
+ * This goes around the edge case and since we're always
+ * a little behind anyways it shouldn't make a big difference.
+ * If DMA has been stopped prior calling this then the
+ * position is exact.
+ */
+ status = regs->RdDCSR;
+ if ((!(status & DCSR_BIU) && (status & DCSR_STRTA)) ||
+ ( (status & DCSR_BIU) && !(status & DCSR_STRTB)))
+ return regs->DBSA;
+ else
+ return regs->DBSB;
+}
+
+
+/**
+ * sa1100_reset_dma - reset a DMA channel
+ * @regs: identifier for the channel to use
+ *
+ * This function resets and reconfigure the given DMA channel. This is
+ * particularly useful after a sleep/wakeup event.
+ *
+ * The @regs identifier is provided by a successful call to
+ * sa1100_request_dma().
+ **/
+
+void sa1100_reset_dma(dma_regs_t *regs)
+{
+ int i;
+
+ for (i = 0; i < SA1100_DMA_CHANNELS; i++)
+ if (regs == (dma_regs_t *)&DDAR(i))
+ break;
+ if (i >= SA1100_DMA_CHANNELS) {
+ printk(KERN_ERR "%s: bad DMA identifier\n", __FUNCTION__);
+ return;
+ }
+
+ regs->ClrDCSR =
+ (DCSR_DONEA | DCSR_DONEB | DCSR_STRTA | DCSR_STRTB |
+ DCSR_IE | DCSR_ERROR | DCSR_RUN);
+ regs->DDAR = dma_chan[i].device;
+}
+
+
+EXPORT_SYMBOL(sa1100_request_dma);
+EXPORT_SYMBOL(sa1100_free_dma);
+EXPORT_SYMBOL(sa1100_start_dma);
+EXPORT_SYMBOL(sa1100_get_dma_pos);
+EXPORT_SYMBOL(sa1100_reset_dma);
+