@c \input /gd/gnu/doc/texinfo @c This is for making the `INSTALL' file for the distribution. @c Makeinfo ignores it when processing the file from the include. @setfilename INSTALL @node Maintenance, Copying, Library Summary, Top @appendix Library Maintenance @menu * Installation:: How to configure, compile and install the GNU C library. * Reporting Bugs:: How to report bugs (if you want to get them fixed) and other troubles you may have with the GNU C library. * Source Layout:: How to add new functions or header files to the GNU C library. * Porting:: How to port the GNU C library to a new machine or operating system. * Contributors:: Contributors to the GNU C Library. @end menu @node Installation @appendixsec How to Install the GNU C Library @cindex installing the library Installation of the GNU C library is relatively simple, but usually requires several GNU tools to be installed already. @iftex (@pxref{Tools for Installation}, below.) @end iftex @menu * Tools for Installation:: We recommend using these tools to build. * Supported Configurations:: What systems the GNU C library runs on. @end menu To configure the GNU C library for your system, run the shell script @file{configure} with @code{sh}. Use an argument which is the conventional GNU name for your system configuration---for example, @samp{sparc-sun-sunos4.1}, for a Sun 4 running SunOS 4.1. @xref{Installation, Installation, Installing GNU CC, gcc.info, Using and Porting GNU CC}, for a full description of standard GNU configuration names. If you omit the configuration name, @file{configure} will try to guess one for you by inspecting the system it is running on. It may or may not be able to come up with a guess, and the its guess might be wrong. @file{configure} will tell you the canonical name of the chosen configuration before proceeding. Here are some options that you should specify (if appropriate) when you run @code{configure}: @table @samp @item --with-binutils=@var{directory} Use the binutils (assembler and linker) in @file{@var{directory}}, not the ones the C compiler would default to. You could use this option if the default binutils on your system cannot deal with all the constructs in the GNU C library. (@code{configure} will detect the problem and suppress these constructs, so the library will still be usable, but functionality may be lost---for example, you can not build a shared libc with old binutils.) @c extra blank line makes it look better @item --without-fp @itemx --nfp Use this option if your computer lacks hardware floating-point support and your operating system does not emulate an FPU. @item --prefix=@var{directory} Install machine-independent data files in subdirectories of @file{@var{directory}}. (You can also set this in @file{configparms}; see below.) The default is to install in `/usr/local'. @item --exec-prefix=@var{directory} Install the library and other machine-dependent files in subdirectories of @file{@var{directory}}. (You can also set this in @file{configparms}; see below.) The default is to use /bin and /sbin. @item --enable-shared @itemx --disable-shared Enable or disable building of an ELF shared library on systems that support it. The default is to build the shared library on systems using ELF when the GNU @code{binutils} are available. @item --enable-profile @itemx --disable-profile Enable or disable building of the profiled C library, @samp{-lc_p}. The default is to build the profiled library. You may wish to disable it if you don't plan to do profiling, because it doubles the build time of compiling just the unprofiled static library. @item --enable-omitfp Enable building a highly-optimized but possibly undebuggable static C library. This causes the normal static and shared (if enabled) C libraries to be compiled with maximal optimization, including the @samp{-fomit-frame-pointer} switch that makes debugging impossible on many machines, and without debugging information (which makes the binaries substantially smaller). An additional static library is compiled with no optimization and full debugging information, and installed as @samp{-lc_g}. @end table The simplest way to run @code{configure} is to do it in the directory that contains the library sources. This prepares to build the library in that very directory. You can prepare to build the library in some other directory by going to that other directory to run @code{configure}. In order to run configure, you will have to specify a directory for it, like this: @smallexample mkdir sun4 cd sun4 ../configure sparc-sun-sunos4.1 @end smallexample @noindent @code{configure} looks for the sources in whatever directory you specified for finding @code{configure} itself. It does not matter where in the file system the source and build directories are---as long as you specify the source directory when you run @code{configure}, you will get the proper results. This feature lets you keep sources and binaries in different directories, and that makes it easy to build the library for several different machines from the same set of sources. Simply create a build directory for each target machine, and run @code{configure} in that directory specifying the target machine's configuration name. The library has a number of special-purpose configuration parameters. These are defined in the file @file{Makeconfig}; see the comments in that file for the details. But don't edit the file @file{Makeconfig} yourself---instead, create a file @file{configparms} in the directory where you are building the library, and define in that file the parameters you want to specify. @file{configparms} should @strong{not} be an edited copy of @file{Makeconfig}; specify only the parameters that you want to override. To see how to set these parameters, find the section of @file{Makeconfig} that says ``These are the configuration variables.'' Then for each parameter that you want to change, copy the definition from @file{Makeconfig} to your new @file{configparms} file, and change the value as appropriate for your system. It is easy to configure the GNU C library for cross-compilation by setting a few variables in @file{configparms}. Set @code{CC} to the cross-compiler for the target you configured the library for; it is important to use this same @code{CC} value when running @code{configure}, like this: @samp{CC=@var{target}-gcc configure @var{target}}. Set @code{BUILD_CC} to the compiler to use for for programs run on the build system as part of compiling the library. You may need to set @code{AR} and @code{RANLIB} to cross-compiling versions of @code{ar} and @code{ranlib} if the native tools are not configured to work with object files for the target you configured for. Some of the machine-dependent code for some machines uses extensions in the GNU C compiler, so you may need to compile the library with GCC. (In fact, all of the existing complete ports require GCC.) To build the library and related programs, type @code{make}. This will produce a lot of output, some of which may look like errors from @code{make} (but isn't). Look for error messages from @code{make} containing @samp{***}. Those indicate that something is really wrong. To build and run some test programs which exercise some of the library facilities, type @code{make check}. This will produce several files with names like @file{@var{program}.out}. To format the @cite{GNU C Library Reference Manual} for printing, type @w{@code{make dvi}}. You need a working @TeX{} installation to do this. To install the library and its header files, and the Info files of the manual, type @code{make install}. This will build things if necessary, before installing them. If you want to install the files in a different place than the one specified at configuration time you can specify a value for the Makefile variable @code{install_root} on the command line. This is useful to create chroot'ed environment or to prepare binary releases.@refill @node Tools for Installation @appendixsubsec Recommended Tools to Install the GNU C Library @cindex installation tools @cindex tools, for installing library We recommend installing the following GNU tools before attempting to build the GNU C library: @itemize @bullet @item @code{make} 3.76.1 You need the latest version of GNU @code{make}. Modifying the GNU C Library to work with other @code{make} programs would be so hard that we recommend you port GNU @code{make} instead. @strong{Really.} We recommend version GNU @code{make} version 3.75, 3.76.1 or later. Version 3.76 is known to have a bug which only shows up in big projects like GNU @code{libc}. @item GCC 2.7.2.3 On most platforms, the GNU C library can only be compiled with the GNU C compiler. We recommend GCC version 2.7.2 or later; earlier versions may have problems. On PowerPC, GCC versions dated earlier than 970904 are known not to work (they crash), including 2.7.2. @item @code{binutils} 2.8.1 Using the GNU @code{binutils} (assembler, linker, and related tools) is preferable when possible, and they are required to build an ELF shared C library. We recommend @code{binutils} version 2.8.1 or later; earlier versions are known to have problems or to not support all architectures. @item @code{texinfo} 3.11 To correctly translate and install the Texinfo documentation you need this version of the @code{texinfo} package. Former versions did not understand all the tags used in the document and also the installation mechanisms for the info files was not present or worked differently. On some Debian Linux based systems the used @code{install-info} program works differently. Here you have to run make like this: @smallexample make INSTALL_INFO=/path/to/GNU/install-info install @end smallexample @end itemize If you change any configuration file you will need also @itemize @bullet @item @code{autoconf} 2.12 @end itemize @noindent and if you change any of the message translation files you will also need @itemize @bullet @item @code{GNU gettext} 0.10 or later @end itemize @noindent If you upgrade your source tree using the patches made available you probably will need those package above in any case. @node Supported Configurations @appendixsubsec Supported Configurations @cindex configurations, all supported The GNU C Library currently supports configurations that match the following patterns: @smallexample alpha-@var{anything}-linux i@var{x}86-@var{anything}-gnu i@var{x}86-@var{anything}-linux m68k-@var{anything}-linux powerpc-@var{anything}-linux sparc64-@var{anything}-linux @end smallexample Former releases of this library (version 1.09.1 and perhaps earlier versions) used to run on the following configurations: @smallexample alpha-dec-osf1 alpha-@var{anything}-linuxecoff i@var{x}86-@var{anything}-bsd4.3 i@var{x}86-@var{anything}-isc2.2 i@var{x}86-@var{anything}-isc3.@var{n} i@var{x}86-@var{anything}-sco3.2 i@var{x}86-@var{anything}-sco3.2v4 i@var{x}86-@var{anything}-sysv i@var{x}86-@var{anything}-sysv4 i@var{x}86-force_cpu386-none i@var{x}86-sequent-bsd i960-nindy960-none m68k-hp-bsd4.3 m68k-mvme135-none m68k-mvme136-none m68k-sony-newsos3 m68k-sony-newsos4 m68k-sun-sunos4.@var{n} mips-dec-ultrix4.@var{n} mips-sgi-irix4.@var{n} sparc-sun-solaris2.@var{n} sparc-sun-sunos4.@var{n} @end smallexample Since no one has volunteered to test and fix the above configurations, these are not supported at the moment. It's expected that these don't work anymore. Porting the library is not hard. If you are interested in doing a port, please contact the glibc maintainers by sending electronic mail to @email{bug-glibc@@prep.ai.mit.edu}. Each case of @samp{i@var{x}86} can be @samp{i386}, @samp{i486}, @samp{i586}, or @samp{i686}. All of those configurations produce a library that can run on any of these processors. The library will be optimized for the specified processor, but will not use instructions not available on all of them. While no other configurations are supported, there are handy aliases for these few. (These aliases work in other GNU software as well.) @smallexample decstation hp320-bsd4.3 hp300bsd i486-gnu i586-linux i386-sco i386-sco3.2v4 i386-sequent-dynix i386-svr4 news sun3-sunos4.@var{n} sun3 sun4-solaris2.@var{n} sun4-sunos5.@var{n} sun4-sunos4.@var{n} sun4 @end smallexample @node Reporting Bugs @appendixsec Reporting Bugs @cindex reporting bugs @cindex bugs, reporting There are probably bugs in the GNU C library. There are certainly errors and omissions in this manual. If you report them, they will get fixed. If you don't, no one will ever know about them and they will remain unfixed for all eternity, if not longer. To report a bug, first you must find it. Hopefully, this will be the hard part. Once you've found a bug, make sure it's really a bug. A good way to do this is to see if the GNU C library behaves the same way some other C library does. If so, probably you are wrong and the libraries are right (but not necessarily). If not, one of the libraries is probably wrong. Once you're sure you've found a bug, try to narrow it down to the smallest test case that reproduces the problem. In the case of a C library, you really only need to narrow it down to one library function call, if possible. This should not be too difficult. The final step when you have a simple test case is to report the bug. When reporting a bug, send your test case, the results you got, the results you expected, what you think the problem might be (if you've thought of anything), your system type, and the version of the GNU C library which you are using. Also include the files @file{config.status} and @file{config.make} which are created by running @file{configure}; they will be in whatever directory was current when you ran @file{configure}. If you think you have found some way in which the GNU C library does not conform to the ISO and POSIX standards (@pxref{Standards and Portability}), that is definitely a bug. Report it!@refill Send bug reports to the Internet address @email{bug-glibc@@prep.ai.mit.edu} or the UUCP path @email{mit-eddie!prep.ai.mit.edu!bug-glibc}. If you have other problems with installation or use, please report those as well.@refill If you are not sure how a function should behave, and this manual doesn't tell you, that's a bug in the manual. Report that too! If the function's behavior disagrees with the manual, then either the library or the manual has a bug, so report the disagreement. If you find any errors or omissions in this manual, please report them to the Internet address @email{bug-glibc-manual@@prep.ai.mit.edu} or the UUCP path @email{mit-eddie!prep.ai.mit.edu!bug-glibc-manual}. @node Source Layout @appendixsec Adding New Functions The process of building the library is driven by the makefiles, which make heavy use of special features of GNU @code{make}. The makefiles are very complex, and you probably don't want to try to understand them. But what they do is fairly straightforward, and only requires that you define a few variables in the right places. The library sources are divided into subdirectories, grouped by topic. The @file{string} subdirectory has all the string-manipulation functions, @file{math} has all the mathematical functions, etc. Each subdirectory contains a simple makefile, called @file{Makefile}, which defines a few @code{make} variables and then includes the global makefile @file{Rules} with a line like: @smallexample include ../Rules @end smallexample @noindent The basic variables that a subdirectory makefile defines are: @table @code @item subdir The name of the subdirectory, for example @file{stdio}. This variable @strong{must} be defined. @item headers The names of the header files in this section of the library, such as @file{stdio.h}. @item routines @itemx aux The names of the modules (source files) in this section of the library. These should be simple names, such as @samp{strlen} (rather than complete file names, such as @file{strlen.c}). Use @code{routines} for modules that define functions in the library, and @code{aux} for auxiliary modules containing things like data definitions. But the values of @code{routines} and @code{aux} are just concatenated, so there really is no practical difference.@refill @item tests The names of test programs for this section of the library. These should be simple names, such as @samp{tester} (rather than complete file names, such as @file{tester.c}). @w{@samp{make tests}} will build and run all the test programs. If a test program needs input, put the test data in a file called @file{@var{test-program}.input}; it will be given to the test program on its standard input. If a test program wants to be run with arguments, put the arguments (all on a single line) in a file called @file{@var{test-program}.args}. Test programs should exit with zero status when the test passes, and nonzero status when the test indicates a bug in the library or error in building. @item others The names of ``other'' programs associated with this section of the library. These are programs which are not tests per se, but are other small programs included with the library. They are built by @w{@samp{make others}}.@refill @item install-lib @itemx install-data @itemx install Files to be installed by @w{@samp{make install}}. Files listed in @samp{install-lib} are installed in the directory specified by @samp{libdir} in @file{configparms} or @file{Makeconfig} (@pxref{Installation}). Files listed in @code{install-data} are installed in the directory specified by @samp{datadir} in @file{configparms} or @file{Makeconfig}. Files listed in @code{install} are installed in the directory specified by @samp{bindir} in @file{configparms} or @file{Makeconfig}.@refill @item distribute Other files from this subdirectory which should be put into a distribution tar file. You need not list here the makefile itself or the source and header files listed in the other standard variables. Only define @code{distribute} if there are files used in an unusual way that should go into the distribution. @item generated Files which are generated by @file{Makefile} in this subdirectory. These files will be removed by @w{@samp{make clean}}, and they will never go into a distribution. @item extra-objs Extra object files which are built by @file{Makefile} in this subdirectory. This should be a list of file names like @file{foo.o}; the files will actually be found in whatever directory object files are being built in. These files will be removed by @w{@samp{make clean}}. This variable is used for secondary object files needed to build @code{others} or @code{tests}. @end table @node Porting @appendixsec Porting the GNU C Library The GNU C library is written to be easily portable to a variety of machines and operating systems. Machine- and operating system-dependent functions are well separated to make it easy to add implementations for new machines or operating systems. This section describes the layout of the library source tree and explains the mechanisms used to select machine-dependent code to use. All the machine-dependent and operating system-dependent files in the library are in the subdirectory @file{sysdeps} under the top-level library source directory. This directory contains a hierarchy of subdirectories (@pxref{Hierarchy Conventions}). Each subdirectory of @file{sysdeps} contains source files for a particular machine or operating system, or for a class of machine or operating system (for example, systems by a particular vendor, or all machines that use IEEE 754 floating-point format). A configuration specifies an ordered list of these subdirectories. Each subdirectory implicitly appends its parent directory to the list. For example, specifying the list @file{unix/bsd/vax} is equivalent to specifying the list @file{unix/bsd/vax unix/bsd unix}. A subdirectory can also specify that it implies other subdirectories which are not directly above it in the directory hierarchy. If the file @file{Implies} exists in a subdirectory, it lists other subdirectories of @file{sysdeps} which are appended to the list, appearing after the subdirectory containing the @file{Implies} file. Lines in an @file{Implies} file that begin with a @samp{#} character are ignored as comments. For example, @file{unix/bsd/Implies} contains:@refill @smallexample # BSD has Internet-related things. unix/inet @end smallexample @noindent and @file{unix/Implies} contains: @need 300 @smallexample posix @end smallexample @noindent So the final list is @file{unix/bsd/vax unix/bsd unix/inet unix posix}. @file{sysdeps} has two ``special'' subdirectories, called @file{generic} and @file{stub}. These two are always implicitly appended to the list of subdirectories (in that order), so you needn't put them in an @file{Implies} file, and you should not create any subdirectories under them intended to be new specific categories. @file{generic} is for things that can be implemented in machine-independent C, using only other machine-independent functions in the C library. @file{stub} is for @dfn{stub} versions of functions which cannot be implemented on a particular machine or operating system. The stub functions always return an error, and set @code{errno} to @code{ENOSYS} (Function not implemented). @xref{Error Reporting}. A source file is known to be system-dependent by its having a version in @file{generic} or @file{stub}; every generally-available function whose implementation is system-dependent in should have either a generic or stub implementation (there is no point in having both). Some rare functions are only useful on specific systems and aren't defined at all on others; these do not appear anywhere in the system-independent source code or makefiles (including the @file{generic} and @file{stub} directories), only in the system-dependent @file{Makefile} in the specific system's subdirectory. If you come across a file that is in one of the main source directories (@file{string}, @file{stdio}, etc.), and you want to write a machine- or operating system-dependent version of it, move the file into @file{sysdeps/generic} and write your new implementation in the appropriate system-specific subdirectory. Note that if a file is to be system-dependent, it @strong{must not} appear in one of the main source directories.@refill There are a few special files that may exist in each subdirectory of @file{sysdeps}: @comment Blank lines after items make the table look better. @table @file @item Makefile A makefile for this machine or operating system, or class of machine or operating system. This file is included by the library makefile @file{Makerules}, which is used by the top-level makefile and the subdirectory makefiles. It can change the variables set in the including makefile or add new rules. It can use GNU @code{make} conditional directives based on the variable @samp{subdir} (see above) to select different sets of variables and rules for different sections of the library. It can also set the @code{make} variable @samp{sysdep-routines}, to specify extra modules to be included in the library. You should use @samp{sysdep-routines} rather than adding modules to @samp{routines} because the latter is used in determining what to distribute for each subdirectory of the main source tree.@refill Each makefile in a subdirectory in the ordered list of subdirectories to be searched is included in order. Since several system-dependent makefiles may be included, each should append to @samp{sysdep-routines} rather than simply setting it: @smallexample sysdep-routines := $(sysdep-routines) foo bar @end smallexample @need 1000 @item Subdirs This file contains the names of new whole subdirectories under the top-level library source tree that should be included for this system. These subdirectories are treated just like the system-independent subdirectories in the library source tree, such as @file{stdio} and @file{math}. Use this when there are completely new sets of functions and header files that should go into the library for the system this subdirectory of @file{sysdeps} implements. For example, @file{sysdeps/unix/inet/Subdirs} contains @file{inet}; the @file{inet} directory contains various network-oriented operations which only make sense to put in the library on systems that support the Internet.@refill @item Dist This file contains the names of files (relative to the subdirectory of @file{sysdeps} in which it appears) which should be included in the distribution. List any new files used by rules in the @file{Makefile} in the same directory, or header files used by the source files in that directory. You don't need to list files that are implementations (either C or assembly source) of routines whose names are given in the machine-independent makefiles in the main source tree. @item configure This file is a shell script fragment to be run at configuration time. The top-level @file{configure} script uses the shell @code{.} command to read the @file{configure} file in each system-dependent directory chosen, in order. The @file{configure} files are often generated from @file{configure.in} files using Autoconf. A system-dependent @file{configure} script will usually add things to the shell variables @samp{DEFS} and @samp{config_vars}; see the top-level @file{configure} script for details. The script can check for @w{@samp{--with-@var{package}}} options that were passed to the top-level @file{configure}. For an option @w{@samp{--with-@var{package}=@var{value}}} @file{configure} sets the shell variable @w{@samp{with_@var{package}}} (with any dashes in @var{package} converted to underscores) to @var{value}; if the option is just @w{@samp{--with-@var{package}}} (no argument), then it sets @w{@samp{with_@var{package}}} to @samp{yes}. @item configure.in This file is an Autoconf input fragment to be processed into the file @file{configure} in this subdirectory. @xref{Introduction,,, autoconf.info, Autoconf: Generating Automatic Configuration Scripts}, for a description of Autoconf. You should write either @file{configure} or @file{configure.in}, but not both. The first line of @file{configure.in} should invoke the @code{m4} macro @samp{GLIBC_PROVIDES}. This macro does several @code{AC_PROVIDE} calls for Autoconf macros which are used by the top-level @file{configure} script; without this, those macros might be invoked again unnecessarily by Autoconf. @end table That is the general system for how system-dependencies are isolated. @iftex The next section explains how to decide what directories in @file{sysdeps} to use. @ref{Porting to Unix}, has some tips on porting the library to Unix variants. @end iftex @menu * Hierarchy Conventions:: The layout of the @file{sysdeps} hierarchy. * Porting to Unix:: Porting the library to an average Unix-like system. @end menu @node Hierarchy Conventions @appendixsubsec Layout of the @file{sysdeps} Directory Hierarchy A GNU configuration name has three parts: the CPU type, the manufacturer's name, and the operating system. @file{configure} uses these to pick the list of system-dependent directories to look for. If the @samp{--nfp} option is @emph{not} passed to @file{configure}, the directory @file{@var{machine}/fpu} is also used. The operating system often has a @dfn{base operating system}; for example, if the operating system is @samp{sunos4.1}, the base operating system is @samp{unix/bsd}. The algorithm used to pick the list of directories is simple: @file{configure} makes a list of the base operating system, manufacturer, CPU type, and operating system, in that order. It then concatenates all these together with slashes in between, to produce a directory name; for example, the configuration @w{@samp{sparc-sun-sunos4.1}} results in @file{unix/bsd/sun/sparc/sunos4.1}. @file{configure} then tries removing each element of the list in turn, so @file{unix/bsd/sparc} and @file{sun/sparc} are also tried, among others. Since the precise version number of the operating system is often not important, and it would be very inconvenient, for example, to have identical @file{sunos4.1.1} and @file{sunos4.1.2} directories, @file{configure} tries successively less specific operating system names by removing trailing suffixes starting with a period. As an example, here is the complete list of directories that would be tried for the configuration @w{@samp{sparc-sun-sunos4.1}} (without the @w{@samp{--nfp}} option): @smallexample sparc/fpu unix/bsd/sun/sunos4.1/sparc unix/bsd/sun/sunos4.1 unix/bsd/sun/sunos4/sparc unix/bsd/sun/sunos4 unix/bsd/sun/sunos/sparc unix/bsd/sun/sunos unix/bsd/sun/sparc unix/bsd/sun unix/bsd/sunos4.1/sparc unix/bsd/sunos4.1 unix/bsd/sunos4/sparc unix/bsd/sunos4 unix/bsd/sunos/sparc unix/bsd/sunos unix/bsd/sparc unix/bsd unix/sun/sunos4.1/sparc unix/sun/sunos4.1 unix/sun/sunos4/sparc unix/sun/sunos4 unix/sun/sunos/sparc unix/sun/sunos unix/sun/sparc unix/sun unix/sunos4.1/sparc unix/sunos4.1 unix/sunos4/sparc unix/sunos4 unix/sunos/sparc unix/sunos unix/sparc unix sun/sunos4.1/sparc sun/sunos4.1 sun/sunos4/sparc sun/sunos4 sun/sunos/sparc sun/sunos sun/sparc sun sunos4.1/sparc sunos4.1 sunos4/sparc sunos4 sunos/sparc sunos sparc @end smallexample Different machine architectures are conventionally subdirectories at the top level of the @file{sysdeps} directory tree. For example, @w{@file{sysdeps/sparc}} and @w{@file{sysdeps/m68k}}. These contain files specific to those machine architectures, but not specific to any particular operating system. There might be subdirectories for specializations of those architectures, such as @w{@file{sysdeps/m68k/68020}}. Code which is specific to the floating-point coprocessor used with a particular machine should go in @w{@file{sysdeps/@var{machine}/fpu}}. There are a few directories at the top level of the @file{sysdeps} hierarchy that are not for particular machine architectures. @table @file @item generic @itemx stub As described above (@pxref{Porting}), these are the two subdirectories that every configuration implicitly uses after all others. @item ieee754 This directory is for code using the IEEE 754 floating-point format, where the C type @code{float} is IEEE 754 single-precision format, and @code{double} is IEEE 754 double-precision format. Usually this directory is referred to in the @file{Implies} file in a machine architecture-specific directory, such as @file{m68k/Implies}. @item posix This directory contains implementations of things in the library in terms of @sc{POSIX.1} functions. This includes some of the @sc{POSIX.1} functions themselves. Of course, @sc{POSIX.1} cannot be completely implemented in terms of itself, so a configuration using just @file{posix} cannot be complete. @item unix This is the directory for Unix-like things. @xref{Porting to Unix}. @file{unix} implies @file{posix}. There are some special-purpose subdirectories of @file{unix}: @table @file @item unix/common This directory is for things common to both BSD and System V release 4. Both @file{unix/bsd} and @file{unix/sysv/sysv4} imply @file{unix/common}. @item unix/inet This directory is for @code{socket} and related functions on Unix systems. The @file{inet} top-level subdirectory is enabled by @file{unix/inet/Subdirs}. @file{unix/common} implies @file{unix/inet}. @end table @item mach This is the directory for things based on the Mach microkernel from CMU (including the GNU operating system). Other basic operating systems (VMS, for example) would have their own directories at the top level of the @file{sysdeps} hierarchy, parallel to @file{unix} and @file{mach}. @end table @node Porting to Unix @appendixsubsec Porting the GNU C Library to Unix Systems Most Unix systems are fundamentally very similar. There are variations between different machines, and variations in what facilities are provided by the kernel. But the interface to the operating system facilities is, for the most part, pretty uniform and simple. The code for Unix systems is in the directory @file{unix}, at the top level of the @file{sysdeps} hierarchy. This directory contains subdirectories (and subdirectory trees) for various Unix variants. The functions which are system calls in most Unix systems are implemented in assembly code, which is generated automatically from specifications in the file @file{sysdeps/unix/syscalls.list}. Some special system calls are implemented in files that are named with a suffix of @samp{.S}; for example, @file{_exit.S}. Files ending in @samp{.S} are run through the C preprocessor before being fed to the assembler. These files all use a set of macros that should be defined in @file{sysdep.h}. The @file{sysdep.h} file in @file{sysdeps/unix} partially defines them; a @file{sysdep.h} file in another directory must finish defining them for the particular machine and operating system variant. See @file{sysdeps/unix/sysdep.h} and the machine-specific @file{sysdep.h} implementations to see what these macros are and what they should do.@refill The system-specific makefile for the @file{unix} directory (that is, the file @file{sysdeps/unix/Makefile}) gives rules to generate several files from the Unix system you are building the library on (which is assumed to be the target system you are building the library @emph{for}). All the generated files are put in the directory where the object files are kept; they should not affect the source tree itself. The files generated are @file{ioctls.h}, @file{errnos.h}, @file{sys/param.h}, and @file{errlist.c} (for the @file{stdio} section of the library). @ignore @c This section might be a good idea if it is finished, @c but there's no point including it as it stands. --rms @c @appendixsec Compatibility with Traditional C @c ??? This section is really short now. Want to keep it? --roland Although the GNU C library implements the @w{ISO C} library facilities, you @emph{can} use the GNU C library with traditional, ``pre-ISO'' C compilers. However, you need to be careful because the content and organization of the GNU C library header files differs from that of traditional C implementations. This means you may need to make changes to your program in order to get it to compile. @end ignore @node Contributors @appendixsec Contributors to the GNU C Library The GNU C library was written originally by Roland McGrath. Some parts of the library were contributed or worked on by other people. @itemize @bullet @item The @code{getopt} function and related code were written by Richard Stallman, @w{David J. MacKenzie}, and @w{Roland McGrath}. @item The merge sort function @code{qsort} was written by Michael J. Haertel. @item The quick sort function used as a fallback by @code{qsort} was written by Douglas C. Schmidt. @item The memory allocation functions @code{malloc}, @code{realloc} and @code{free} and related code were written by Michael J. Haertel. @item Fast implementations of many of the string functions (@code{memcpy}, @code{strlen}, etc.) were written by Torbj@"orn Granlund. @item The @file{tar.h} header file was written by David J. MacKenzie. @item The port to the MIPS DECStation running Ultrix 4 (@code{mips-dec-ultrix4}) was contributed by Brendan Kehoe and Ian Lance Taylor. @item The DES encryption function @code{crypt} and related functions were contributed by Michael Glad. @item The @code{ftw} and @code{nftw} function was contributed by Ulrich Drepper. @item The startup code to support SunOS shared libraries was contributed by Tom Quinn. @item The @code{mktime} function was contributed by Paul Eggert. @item The port to the Sequent Symmetry running Dynix version 3 (@code{i386-sequent-bsd}) was contributed by Jason Merrill. @item The timezone support code is derived from the public-domain timezone package by Arthur David Olson and his many contributors. @item The port to the DEC Alpha running OSF/1 (@code{alpha-dec-osf1}) was contributed by Brendan Kehoe, using some code written by Roland McGrath. @item The port to SGI machines running Irix 4 (@code{mips-sgi-irix4}) was contributed by Tom Quinn. @item The port of the Mach and Hurd code to the MIPS architecture (@code{mips-@var{anything}-gnu}) was contributed by Kazumoto Kojima. @item The floating-point printing function used by @code{printf} and friends and the floating-point reading function used by @code{scanf}, @code{strtod} and friends were written by Ulrich Drepper. The multi-precision integer functions used in those functions are taken from GNU MP, which was contributed by Torbj@"orn Granlund. @item The internationalization support in the library, and the support programs @code{locale} and @code{localedef}, were written by Ulrich Drepper. Ulrich Drepper adapted the support code for message catalogs (@file{libintl.h}, etc.) from the GNU @code{gettext} package, which he also wrote. He also contributed the @code{catgets} support and the entire suite of multi-byte and wide-character support functions (@file{wctype.h}, @file{wchar.h}, etc.). @item The implementations of the @file{nsswitch.conf} mechanism and the files and DNS backends for it were designed and written by Ulrich Drepper and Roland McGrath, based on a backend interface defined by Peter Eriksson. @item The port to Linux i386/ELF (@code{i386-@var{anything}-linux}) was contributed by Ulrich Drepper, based in large part on work done in Hongjiu Lu's Linux version of the GNU C Library. @item The port to Linux/m68k (@code{m68k-@var{anything}-linux}) was contributed by Andreas Schwab. @item The ports to Linux/ARM (@code{arm-@var{ANYTHING}-linuxaout}) and ARM standalone (@code{arm-@var{ANYTHING}-none}), as well as parts of the IPv6 support code, were contributed by Philip Blundell. @item Richard Henderson contributed the ELF dynamic linking code and other support for the Alpha processor. @item David Mosberger-Tang contributed the port to Linux/Alpha (@code{alpha-@var{anything}-linux}). @item The port to Linux on PowerPC (@code{powerpc-@var{anything}-linux}) was contributed by Geoffrey Keating. @item Miles Bader wrote the argp argument-parsing package, and the argz/envz interfaces. @item Stephen R. van den Berg contributed a highly-optimized @code{strstr} function. @item Ulrich Drepper contributed the @code{hsearch} and @code{drand48} families of functions; reentrant @samp{@dots{}@code{_r}} versions of the @code{random} family; System V shared memory and IPC support code; and several highly-optimized string functions for i@var{x}86 processors. @item The math functions are taken from @code{fdlibm-5.1} by Sun Microsystems, as modified by J.T. Conklin, Ian Lance Taylor, Ulrich Drepper, Andreas Schwab, and Roland McGrath. @item The @code{libio} library used to implement @code{stdio} functions on some platforms was written by Per Bothner and modified by Ulrich Drepper. @item The Internet-related code (most of the @file{inet} subdirectory) and several other miscellaneous functions and header files have been included from 4.4 BSD with little or no modification. All code incorporated from 4.4 BSD is under the following copyright: @quotation @display Copyright @copyright{} 1991 Regents of the University of California. All rights reserved. @end display Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: @enumerate @item Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. @item Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. @item All advertising materials mentioning features or use of this software must display the following acknowledgement: @quotation This product includes software developed by the University of California, Berkeley and its contributors. @end quotation @item Neither the name of the University nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission. @end enumerate @sc{this software is provided by the regents and contributors ``as is'' and any express or implied warranties, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose are disclaimed. in no event shall the regents or contributors be liable for any direct, indirect, incidental, special, exemplary, or consequential damages (including, but not limited to, procurement of substitute goods or services; loss of use, data, or profits; or business interruption) however caused and on any theory of liability, whether in contract, strict liability, or tort (including negligence or otherwise) arising in any way out of the use of this software, even if advised of the possibility of such damage.} @end quotation @item The random number generation functions @code{random}, @code{srandom}, @code{setstate} and @code{initstate}, which are also the basis for the @code{rand} and @code{srand} functions, were written by Earl T. Cohen for the University of California at Berkeley and are copyrighted by the Regents of the University of California. They have undergone minor changes to fit into the GNU C library and to fit the @w{ISO C} standard, but the functional code is Berkeley's.@refill @item The Internet resolver code is taken directly from BIND 4.9.5, which is under both the Berkeley copyright above and also: @quotation Portions Copyright @copyright{} 1993 by Digital Equipment Corporation. Permission to use, copy, modify, and distribute this software for any purpose with or without fee is hereby granted, provided that the above copyright notice and this permission notice appear in all copies, and that the name of Digital Equipment Corporation not be used in advertising or publicity pertaining to distribution of the document or software without specific, written prior permission. @sc{the software is provided ``as is'' and digital equipment corp. disclaims all warranties with regard to this software, including all implied warranties of merchantability and fitness. in no event shall digital equipment corporation be liable for any special, direct, indirect, or consequential damages or any damages whatsoever resulting from loss of use, data or profits, whether in an action of contract, negligence or other tortious action, arising out of or in connection with the use or performance of this software.} @end quotation @item The code to support Sun RPC is taken verbatim from Sun's @w{@sc{rpcsrc-4.0}} distribution, and is covered by this copyright: @quotation @display Copyright @copyright{} 1984, Sun Microsystems, Inc. @end display Sun RPC is a product of Sun Microsystems, Inc. and is provided for unrestricted use provided that this legend is included on all tape media and as a part of the software program in whole or part. Users may copy or modify Sun RPC without charge, but are not authorized to license or distribute it to anyone else except as part of a product or program developed by the user. @sc{sun rpc is provided as is with no warranties of any kind including the warranties of design, merchantibility and fitness for a particular purpose, or arising from a course of dealing, usage or trade practice.} Sun RPC is provided with no support and without any obligation on the part of Sun Microsystems, Inc. to assist in its use, correction, modification or enhancement. @sc{sun microsystems, inc. shall have no liability with respect to the infringement of copyrights, trade secrets or any patents by sun rpc or any part thereof.} In no event will Sun Microsystems, Inc. be liable for any lost revenue or profits or other special, indirect and consequential damages, even if Sun has been advised of the possibility of such damages. @display Sun Microsystems, Inc. 2550 Garcia Avenue Mountain View, California 94043 @end display @end quotation @item Some of the support code for Mach is taken from Mach 3.0 by CMU, and is under the following copyright terms: @quotation @display Mach Operating System Copyright @copyright{} 1991,1990,1989 Carnegie Mellon University All Rights Reserved. @end display Permission to use, copy, modify and distribute this software and its documentation is hereby granted, provided that both the copyright notice and this permission notice appear in all copies of the software, derivative works or modified versions, and any portions thereof, and that both notices appear in supporting documentation. @sc{carnegie mellon allows free use of this software in its ``as is'' condition. carnegie mellon disclaims any liability of any kind for any damages whatsoever resulting from the use of this software.} Carnegie Mellon requests users of this software to return to @display Software Distribution Coordinator School of Computer Science Carnegie Mellon University Pittsburgh PA 15213-3890 @end display @noindent or @email{Software.Distribution@@CS.CMU.EDU} any improvements or extensions that they make and grant Carnegie Mellon the rights to redistribute these changes. @end quotation @item The code for the database library @file{libdb} comes from the 2.3 release of Berkeley DB. That code is under the same copyright as 4.4 BSD and also: @quotation @display Copyright @copyright{} 1990, 1993, 1994, 1995, 1996, 1997 Sleepycat Software. All rights reserved. @end display Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: @enumerate @item Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. @item Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. @item Redistributions in any form must be accompanied by information on how to obtain complete source code for the DB software and any accompanying software that uses the DB software. The source code must either be included in the distribution or be available for no more than the cost of distribution plus a nominal fee, and must be freely redistributable under reasonable conditions. For an executable file, complete source code means the source code for all modules it contains. It does not mean source code for modules or files that typically accompany the operating system on which the executable file runs, e.g., standard library modules or system header files. @end enumerate @sc{this software is provided by sleepycat software ``as is'' and any express or implied warranties, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose are disclaimed. in no event shall sleepycat software be liable for any direct, indirect, incidental, special, exemplary, or consequential damages (including, but not limited to, procurement of substitute goods or services; loss of use, data, or profits; or business interruption) however caused and on any theory of liability, whether in contract, strict liability, or tort (including negligence or otherwise) arising in any way out of the use of this software, even if advised of the possibility of such damage.} @display Portions copyright @copyright{} 1995, 1996 The President and Fellows of Harvard University. All rights reserved. @end display Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: @enumerate @item Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. @item Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. @item All advertising materials mentioning features or use of this software must display the following acknowledgement: @quotation This product includes software developed by Harvard University and its contributors. @end quotation @item Neither the name of the University nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission. @end enumerate @sc{this software is provided by harvard and its contributors ``as is'' and any express or implied warranties, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose are disclaimed. in no event shall harvard or its contributors be liable for any direct, indirect, incidental, special, exemplary, or consequential damages (including, but not limited to, procurement of substitute goods or services; loss of use, data, or profits; or business interruption) however caused and on any theory of liability, whether in contract, strict liability, or tort (including negligence or otherwise) arising in any way out of the use of this software, even if advised of the possibility of such damage.} @noindent For a license to use, redistribute or sell DB software under conditions other than those described above, or to purchase support for this software, please contact Sleepycat Software at @display Sleepycat Software 394 E. Riding Dr. Carlisle, MA 01741 USA +1-508-287-4781 @end display or @email{db@@sleepycat.com}. @end quotation @end itemize @c @bye