From 407dc7a070d3ed86eeecc3b9e6a6dec11f961493 Mon Sep 17 00:00:00 2001 From: Ulrich Drepper Date: Sun, 7 Mar 1999 08:16:52 +0000 Subject: (Tools for Compilation): Update required texinfo version. --- manual/texinfo.tex | 1253 +++++++++++++++++++++++++++------------------------- 1 file changed, 663 insertions(+), 590 deletions(-) (limited to 'manual/texinfo.tex') diff --git a/manual/texinfo.tex b/manual/texinfo.tex index a57d2a85de..dab4345571 100644 --- a/manual/texinfo.tex +++ b/manual/texinfo.tex @@ -3,7 +3,7 @@ % Load plain if necessary, i.e., if running under initex. \expandafter\ifx\csname fmtname\endcsname\relax\input plain\fi % -\def\texinfoversion{1999-01-29}% +\def\texinfoversion{1999-02-21.16}% % % Copyright (C) 1985, 86, 88, 90, 91, 92, 93, 94, 95, 96, 97, 98, 99 % Free Software Foundation, Inc. @@ -30,29 +30,33 @@ % Please try the latest version of texinfo.tex before submitting bug % reports; you can get the latest version from: % ftp://ftp.gnu.org/pub/gnu/texinfo.tex -% /home/gd/gnu/doc/texinfo.tex on the GNU machines. % (and all GNU mirrors, see http://www.gnu.org/order/ftp.html) % ftp://tug.org/tex/texinfo.tex % ftp://ctan.org/macros/texinfo/texinfo.tex % (and all CTAN mirrors, finger ctan@ctan.org for a list). -% The texinfo.tex in the texinfo distribution itself could well be out +% /home/gd/gnu/doc/texinfo.tex on the GNU machines. +% The texinfo.tex in any given Texinfo distribution could well be out % of date, so if that's what you're using, please check. +% There is a small home page for Texinfo at http://texinfo.org/. % -% Send bug reports to bug-texinfo@gnu.org. -% Please include a precise test case in each bug report, -% including a complete document with which we can reproduce the problem. +% Send bug reports to bug-texinfo@gnu.org. Please include including a +% complete document in each bug report with which we can reproduce the +% problem. Patches are, of course, greatly appreciated. % % To process a Texinfo manual with TeX, it's most reliable to use the -% texi2dvi shell script that comes with the distribution. For simple -% manuals, however, you can get away with: +% texi2dvi shell script that comes with the distribution. For a simple +% manual foo.texi, however, you can get away with this: % tex foo.texi % texindex foo.?? % tex foo.texi % tex foo.texi -% dvips foo.dvi -o # or whatever, to process the dvi file. +% dvips foo.dvi -o # or whatever, to process the dvi file; this makes foo.ps. % The extra runs of TeX get the cross-reference information correct. % Sometimes one run after texindex suffices, and sometimes you need more % than two; texi2dvi does it as many times as necessary. +% +% It is possible to adapt texinfo.tex for other languages. You can get +% the existing language-specific files from ftp://ftp.gnu.org/gnu/texinfo/. \message{Loading texinfo [version \texinfoversion]:} @@ -92,29 +96,29 @@ \newlinechar = `^^J % Set up fixed words for English if not already set. -\ifx\putwordAppendix\undefined \gdef\putwordAppendix{Appendix}\fi +\ifx\putwordAppendix\undefined \gdef\putwordAppendix{Appendix}\fi \ifx\putwordChapter\undefined \gdef\putwordChapter{Chapter}\fi \ifx\putwordfile\undefined \gdef\putwordfile{file}\fi \ifx\putwordIndexIsEmpty\undefined \gdef\putwordIndexIsEmpty{(Index is empty)}\fi \ifx\putwordIndexNonexistent\undefined \gdef\putwordIndexNonexistent{(Index is nonexistent)}\fi \ifx\putwordInfo\undefined \gdef\putwordInfo{Info}\fi \ifx\putwordMethodon\undefined \gdef\putwordMethodon{Method on}\fi -\ifx\putwordNoTitle\undefined \gdef\putwordNoTitle{No Title}\fi -\ifx\putwordOf\undefined \gdef\putwordOf{of}\fi +\ifx\putwordNoTitle\undefined \gdef\putwordNoTitle{No Title}\fi +\ifx\putwordof\undefined \gdef\putwordof{of}\fi \ifx\putwordon\undefined \gdef\putwordon{on}\fi \ifx\putwordpage\undefined \gdef\putwordpage{page}\fi \ifx\putwordsection\undefined \gdef\putwordsection{section}\fi \ifx\putwordSection\undefined \gdef\putwordSection{Section}\fi \ifx\putwordsee\undefined \gdef\putwordsee{see}\fi \ifx\putwordSee\undefined \gdef\putwordSee{See}\fi -\ifx\putwordShortTOC\undefined \gdef\putwordShortTOC{Short Contents}\fi -\ifx\putwordTOC\undefined \gdef\putwordTOC{Table of Contents}\fi +\ifx\putwordShortTOC\undefined \gdef\putwordShortTOC{Short Contents}\fi +\ifx\putwordTOC\undefined \gdef\putwordTOC{Table of Contents}\fi % \ifx\putwordMJan\undefined \gdef\putwordMJan{January}\fi \ifx\putwordMFeb\undefined \gdef\putwordMFeb{February}\fi \ifx\putwordMMar\undefined \gdef\putwordMMar{March}\fi \ifx\putwordMApr\undefined \gdef\putwordMApr{April}\fi -\ifx\putwordMMai\undefined \gdef\putwordMMai{May}\fi +\ifx\putwordMMay\undefined \gdef\putwordMMay{May}\fi \ifx\putwordMJun\undefined \gdef\putwordMJun{June}\fi \ifx\putwordMJul\undefined \gdef\putwordMJul{July}\fi \ifx\putwordMAug\undefined \gdef\putwordMAug{August}\fi @@ -123,14 +127,14 @@ \ifx\putwordMNov\undefined \gdef\putwordMNov{November}\fi \ifx\putwordMDec\undefined \gdef\putwordMDec{December}\fi % -\ifx\putwordDefmac\undefined \gdef\putwordDefmac{Macro}\fi -\ifx\putwordDefspec\undefined \gdef\putwordDefspec{Special Form}\fi -\ifx\putwordDefivar\undefined \gdef\putwordDefivar{Instance Variable}\fi -\ifx\putwordDefvar\undefined \gdef\putwordDefvar{Variable}\fi -\ifx\putwordDefopt\undefined \gdef\putwordDefopt{User Option}\fi -\ifx\putwordDeftypevar\undefined \gdef\putwordDeftypevar{Variable}\fi -\ifx\putwordDeffunc\undefined \gdef\putwordDeffunc{Function}\fi -\ifx\putwordDeftypefun\undefined \gdef\putwordDeftypefun{Function}\fi +\ifx\putwordDefmac\undefined \gdef\putwordDefmac{Macro}\fi +\ifx\putwordDefspec\undefined \gdef\putwordDefspec{Special Form}\fi +\ifx\putwordDefivar\undefined \gdef\putwordDefivar{Instance Variable}\fi +\ifx\putwordDefvar\undefined \gdef\putwordDefvar{Variable}\fi +\ifx\putwordDefopt\undefined \gdef\putwordDefopt{User Option}\fi +\ifx\putwordDeftypevar\undefined\gdef\putwordDeftypevar{Variable}\fi +\ifx\putwordDeffunc\undefined \gdef\putwordDeffunc{Function}\fi +\ifx\putwordDeftypefun\undefined\gdef\putwordDeftypefun{Function}\fi % Ignore a token. % @@ -731,416 +735,89 @@ where each line of input produces a line of output.} \let\c=\comment -% @paragraphindent is defined for the Info formatting commands only. -\let\paragraphindent=\comment - -% Prevent errors for section commands. -% Used in @ignore and in failing conditionals. -\def\ignoresections{% -\let\chapter=\relax -\let\unnumbered=\relax -\let\top=\relax -\let\unnumberedsec=\relax -\let\unnumberedsection=\relax -\let\unnumberedsubsec=\relax -\let\unnumberedsubsection=\relax -\let\unnumberedsubsubsec=\relax -\let\unnumberedsubsubsection=\relax -\let\section=\relax -\let\subsec=\relax -\let\subsubsec=\relax -\let\subsection=\relax -\let\subsubsection=\relax -\let\appendix=\relax -\let\appendixsec=\relax -\let\appendixsection=\relax -\let\appendixsubsec=\relax -\let\appendixsubsection=\relax -\let\appendixsubsubsec=\relax -\let\appendixsubsubsection=\relax -\let\contents=\relax -\let\smallbook=\relax -\let\titlepage=\relax -} - -% Used in nested conditionals, where we have to parse the Texinfo source -% and so want to turn off most commands, in case they are used -% incorrectly. +% @paragraphindent NCHARS +% We'll use ems for NCHARS, close enough. +% We cannot implement @paragraphindent asis, though. +% +\def\asisword{asis} % no translation, these are keywords +\def\noneword{none} % -\def\ignoremorecommands{% - \let\defcodeindex = \relax - \let\defcv = \relax - \let\deffn = \relax - \let\deffnx = \relax - \let\defindex = \relax - \let\defivar = \relax - \let\defmac = \relax - \let\defmethod = \relax - \let\defop = \relax - \let\defopt = \relax - \let\defspec = \relax - \let\deftp = \relax - \let\deftypefn = \relax - \let\deftypefun = \relax - \let\deftypevar = \relax - \let\deftypevr = \relax - \let\defun = \relax - \let\defvar = \relax - \let\defvr = \relax - \let\ref = \relax - \let\xref = \relax - \let\printindex = \relax - \let\pxref = \relax - \let\settitle = \relax - \let\setchapternewpage = \relax - \let\setchapterstyle = \relax - \let\everyheading = \relax - \let\evenheading = \relax - \let\oddheading = \relax - \let\everyfooting = \relax - \let\evenfooting = \relax - \let\oddfooting = \relax - \let\headings = \relax - \let\include = \relax - \let\lowersections = \relax - \let\down = \relax - \let\raisesections = \relax - \let\up = \relax - \let\set = \relax - \let\clear = \relax - \let\item = \relax +\def\paragraphindent{\parsearg\doparagraphindent} +\def\doparagraphindent#1{% + \def\temp{#1}% + \ifx\temp\asisword + \else + \ifx\temp\noneword + \defaultparindent = 0pt + \else + \defaultparindent = #1em + \fi + \fi + \parindent = \defaultparindent } -% Ignore @ignore ... @end ignore. +% @asis just yields its argument. Used with @table, for example. % -\def\ignore{\doignore{ignore}} +\def\asis#1{#1} -% Ignore @ifinfo, @ifhtml, @ifnottex, @html, @menu, and @direntry text. +% @math means output in math mode. +% We don't use $'s directly in the definition of \math because control +% sequences like \math are expanded when the toc file is written. Then, +% we read the toc file back, the $'s will be normal characters (as they +% should be, according to the definition of Texinfo). So we must use a +% control sequence to switch into and out of math mode. % -\def\ifinfo{\doignore{ifinfo}} -\def\ifhtml{\doignore{ifhtml}} -\def\ifnottex{\doignore{ifnottex}} -\def\html{\doignore{html}} -\def\menu{\doignore{menu}} -\def\direntry{\doignore{direntry}} +% This isn't quite enough for @math to work properly in indices, but it +% seems unlikely it will ever be needed there. +% +\let\implicitmath = $ +\def\math#1{\implicitmath #1\implicitmath} -% @dircategory CATEGORY -- specify a category of the dir file -% which this file should belong to. Ignore this in TeX. -\let\dircategory = \comment +% @bullet and @minus need the same treatment as @math, just above. +\def\bullet{\implicitmath\ptexbullet\implicitmath} +\def\minus{\implicitmath-\implicitmath} -% Ignore text until a line `@end #1'. -% -\def\doignore#1{\begingroup - % Don't complain about control sequences we have declared \outer. - \ignoresections - % - % Define a command to swallow text until we reach `@end #1'. - % This @ is a catcode 12 token (that is the normal catcode of @ in - % this texinfo.tex file). We change the catcode of @ below to match. - \long\def\doignoretext##1@end #1{\enddoignore}% - % - % Make sure that spaces turn into tokens that match what \doignoretext wants. - \catcode32 = 10 - % - % Ignore braces, too, so mismatched braces don't cause trouble. - \catcode`\{ = 9 - \catcode`\} = 9 - % - % We must not have @c interpreted as a control sequence. - \catcode`\@ = 12 - % - % Make the letter c a comment character so that the rest of the line - % will be ignored. This way, the document can have (for example) - % @c @end ifinfo - % and the @end ifinfo will be properly ignored. - % (We've just changed @ to catcode 12.) - \catcode`\c = 14 - % - % And now expand that command. - \doignoretext -} +% @refill is a no-op. +\let\refill=\relax -% What we do to finish off ignored text. +% If working on a large document in chapters, it is convenient to +% be able to disable indexing, cross-referencing, and contents, for test runs. +% This is done with @novalidate (before @setfilename). % -\def\enddoignore{\endgroup\ignorespaces}% +\newif\iflinks \linkstrue % by default we want the aux files. +\let\novalidate = \linksfalse -\newif\ifwarnedobs\warnedobsfalse -\def\obstexwarn{% - \ifwarnedobs\relax\else - % We need to warn folks that they may have trouble with TeX 3.0. - % This uses \immediate\write16 rather than \message to get newlines. - \immediate\write16{} - \immediate\write16{WARNING: for users of Unix TeX 3.0!} - \immediate\write16{This manual trips a bug in TeX version 3.0 (tex hangs).} - \immediate\write16{If you are running another version of TeX, relax.} - \immediate\write16{If you are running Unix TeX 3.0, kill this TeX process.} - \immediate\write16{ Then upgrade your TeX installation if you can.} - \immediate\write16{ (See ftp://ftp.gnu.org/pub/gnu/TeX.README.)} - \immediate\write16{If you are stuck with version 3.0, run the} - \immediate\write16{ script ``tex3patch'' from the Texinfo distribution} - \immediate\write16{ to use a workaround.} - \immediate\write16{} - \global\warnedobstrue - \fi +% @setfilename is done at the beginning of every texinfo file. +% So open here the files we need to have open while reading the input. +% This makes it possible to make a .fmt file for texinfo. +\def\setfilename{% + \iflinks + \readauxfile + \fi % \openindices needs to do some work in any case. + \openindices + \fixbackslash % Turn off hack to swallow `\input texinfo'. + \global\let\setfilename=\comment % Ignore extra @setfilename cmds. + % + % If texinfo.cnf is present on the system, read it. + % Useful for site-wide @afourpaper, etc. + % Just to be on the safe side, close the input stream before the \input. + \openin 1 texinfo.cnf + \ifeof1 \let\temp=\relax \else \def\temp{\input texinfo.cnf }\fi + \closein1 + \temp + % + \comment % Ignore the actual filename. } -% **In TeX 3.0, setting text in \nullfont hangs tex. For a -% workaround (which requires the file ``dummy.tfm'' to be installed), -% uncomment the following line: -%%%%%\font\nullfont=dummy\let\obstexwarn=\relax - -% Ignore text, except that we keep track of conditional commands for -% purposes of nesting, up to an `@end #1' command. +% Called from \setfilename. % -\def\nestedignore#1{% - \obstexwarn - % We must actually expand the ignored text to look for the @end - % command, so that nested ignore constructs work. Thus, we put the - % text into a \vbox and then do nothing with the result. To minimize - % the change of memory overflow, we follow the approach outlined on - % page 401 of the TeXbook: make the current font be a dummy font. - % - \setbox0 = \vbox\bgroup - % Don't complain about control sequences we have declared \outer. - \ignoresections - % - % Define `@end #1' to end the box, which will in turn undefine the - % @end command again. - \expandafter\def\csname E#1\endcsname{\egroup\ignorespaces}% - % - % We are going to be parsing Texinfo commands. Most cause no - % trouble when they are used incorrectly, but some commands do - % complicated argument parsing or otherwise get confused, so we - % undefine them. - % - % We can't do anything about stray @-signs, unfortunately; - % they'll produce `undefined control sequence' errors. - \ignoremorecommands - % - % Set the current font to be \nullfont, a TeX primitive, and define - % all the font commands to also use \nullfont. We don't use - % dummy.tfm, as suggested in the TeXbook, because not all sites - % might have that installed. Therefore, math mode will still - % produce output, but that should be an extremely small amount of - % stuff compared to the main input. - % - \nullfont - \let\tenrm = \nullfont \let\tenit = \nullfont \let\tensl = \nullfont - \let\tenbf = \nullfont \let\tentt = \nullfont \let\smallcaps = \nullfont - \let\tensf = \nullfont - % Similarly for index fonts (mostly for their use in - % smallexample) - \let\indrm = \nullfont \let\indit = \nullfont \let\indsl = \nullfont - \let\indbf = \nullfont \let\indtt = \nullfont \let\indsc = \nullfont - \let\indsf = \nullfont - % - % Don't complain when characters are missing from the fonts. - \tracinglostchars = 0 - % - % Don't bother to do space factor calculations. - \frenchspacing - % - % Don't report underfull hboxes. - \hbadness = 10000 - % - % Do minimal line-breaking. - \pretolerance = 10000 - % - % Do not execute instructions in @tex - \def\tex{\doignore{tex}}% - % Do not execute macro definitions. - % `c' is a comment character, so the word `macro' will get cut off. - \def\macro{\doignore{ma}}% -} - -% @set VAR sets the variable VAR to an empty value. -% @set VAR REST-OF-LINE sets VAR to the value REST-OF-LINE. -% -% Since we want to separate VAR from REST-OF-LINE (which might be -% empty), we can't just use \parsearg; we have to insert a space of our -% own to delimit the rest of the line, and then take it out again if we -% didn't need it. Make sure the catcode of space is correct to avoid -% losing inside @example, for instance. -% -\def\set{\begingroup\catcode` =10 - \catcode`\-=12 \catcode`\_=12 % Allow - and _ in VAR. - \parsearg\setxxx} -\def\setxxx#1{\setyyy#1 \endsetyyy} -\def\setyyy#1 #2\endsetyyy{% - \def\temp{#2}% - \ifx\temp\empty \global\expandafter\let\csname SET#1\endcsname = \empty - \else \setzzz{#1}#2\endsetzzz % Remove the trailing space \setxxx inserted. - \fi - \endgroup -} -% Can't use \xdef to pre-expand #2 and save some time, since \temp or -% \next or other control sequences that we've defined might get us into -% an infinite loop. Consider `@set foo @cite{bar}'. -\def\setzzz#1#2 \endsetzzz{\expandafter\gdef\csname SET#1\endcsname{#2}} - -% @clear VAR clears (i.e., unsets) the variable VAR. -% -\def\clear{\parsearg\clearxxx} -\def\clearxxx#1{\global\expandafter\let\csname SET#1\endcsname=\relax} - -% @value{foo} gets the text saved in variable foo. -% -{ - \catcode`\_ = \active - % - % We might end up with active _ or - characters in the argument if - % we're called from @code, as @code{@value{foo-bar_}}. So \let any - % such active characters to their normal equivalents. - \gdef\value{\begingroup - \catcode`\-=12 \catcode`\_=12 - \indexbreaks \let_\normalunderscore - \valuexxx} -} -\def\valuexxx#1{\expandablevalue{#1}\endgroup} - -% We have this subroutine so that we can handle at least some @value's -% properly in indexes (we \let\value to this in \indexdummies). Ones -% whose names contain - or _ still won't work, but we can't do anything -% about that. The command has to be fully expandable, since the result -% winds up in the index file. This means that if the variable's value -% contains other Texinfo commands, it's almost certain it will fail -% (although perhaps we could fix that with sufficient work to do a -% one-level expansion on the result, instead of complete). -% -\def\expandablevalue#1{% - \expandafter\ifx\csname SET#1\endcsname\relax - {[No value for ``#1'']}% - \else - \csname SET#1\endcsname - \fi -} - -% @ifset VAR ... @end ifset reads the `...' iff VAR has been defined -% with @set. -% -\def\ifset{\parsearg\ifsetxxx} -\def\ifsetxxx #1{% - \expandafter\ifx\csname SET#1\endcsname\relax - \expandafter\ifsetfail - \else - \expandafter\ifsetsucceed - \fi -} -\def\ifsetsucceed{\conditionalsucceed{ifset}} -\def\ifsetfail{\nestedignore{ifset}} -\defineunmatchedend{ifset} - -% @ifclear VAR ... @end ifclear reads the `...' iff VAR has never been -% defined with @set, or has been undefined with @clear. -% -\def\ifclear{\parsearg\ifclearxxx} -\def\ifclearxxx #1{% - \expandafter\ifx\csname SET#1\endcsname\relax - \expandafter\ifclearsucceed - \else - \expandafter\ifclearfail - \fi -} -\def\ifclearsucceed{\conditionalsucceed{ifclear}} -\def\ifclearfail{\nestedignore{ifclear}} -\defineunmatchedend{ifclear} - -% @iftex, @ifnothtml, @ifnotinfo always succeed; we read the text -% following, through the first @end iftex (etc.). Make `@end iftex' -% (etc.) valid only after an @iftex. -% -\def\iftex{\conditionalsucceed{iftex}} -\def\ifnothtml{\conditionalsucceed{ifnothtml}} -\def\ifnotinfo{\conditionalsucceed{ifnotinfo}} -\defineunmatchedend{iftex} -\defineunmatchedend{ifnothtml} -\defineunmatchedend{ifnotinfo} - -% We can't just want to start a group at @iftex (for example) and end it -% at @end iftex, since then @set commands inside the conditional have no -% effect (they'd get reverted at the end of the group). So we must -% define \Eiftex to redefine itself to be its previous value. (We can't -% just define it to fail again with an ``unmatched end'' error, since -% the @ifset might be nested.) -% -\def\conditionalsucceed#1{% - \edef\temp{% - % Remember the current value of \E#1. - \let\nece{prevE#1} = \nece{E#1}% - % - % At the `@end #1', redefine \E#1 to be its previous value. - \def\nece{E#1}{\let\nece{E#1} = \nece{prevE#1}}% - }% - \temp -} - -% We need to expand lots of \csname's, but we don't want to expand the -% control sequences after we've constructed them. -% -\def\nece#1{\expandafter\noexpand\csname#1\endcsname} - -% @asis just yields its argument. Used with @table, for example. -% -\def\asis#1{#1} - -% @math means output in math mode. -% We don't use $'s directly in the definition of \math because control -% sequences like \math are expanded when the toc file is written. Then, -% we read the toc file back, the $'s will be normal characters (as they -% should be, according to the definition of Texinfo). So we must use a -% control sequence to switch into and out of math mode. -% -% This isn't quite enough for @math to work properly in indices, but it -% seems unlikely it will ever be needed there. -% -\let\implicitmath = $ -\def\math#1{\implicitmath #1\implicitmath} - -% @bullet and @minus need the same treatment as @math, just above. -\def\bullet{\implicitmath\ptexbullet\implicitmath} -\def\minus{\implicitmath-\implicitmath} - -% @refill is a no-op. -\let\refill=\relax - -% If working on a large document in chapters, it is convenient to -% be able to disable indexing, cross-referencing, and contents, for test runs. -% This is done with @novalidate (before @setfilename). -% -\newif\iflinks \linkstrue % by default we want the aux files. -\let\novalidate = \linksfalse - -% @setfilename is done at the beginning of every texinfo file. -% So open here the files we need to have open while reading the input. -% This makes it possible to make a .fmt file for texinfo. -\def\setfilename{% - \iflinks - \readauxfile - \fi % \openindices needs to do some work in any case. - \openindices - \fixbackslash % Turn off hack to swallow `\input texinfo'. - \global\let\setfilename=\comment % Ignore extra @setfilename cmds. - % - % If texinfo.cnf is present on the system, read it. - % Useful for site-wide @afourpaper, etc. - % Just to be on the safe side, close the input stream before the \input. - \openin 1 texinfo.cnf - \ifeof1 \let\temp=\relax \else \def\temp{\input texinfo.cnf }\fi - \closein1 - \temp - % - \comment % Ignore the actual filename. -} - -% Called from \setfilename. -% -\def\openindices{% - \newindex{cp}% - \newcodeindex{fn}% - \newcodeindex{vr}% - \newcodeindex{tp}% - \newcodeindex{ky}% - \newcodeindex{pg}% +\def\openindices{% + \newindex{cp}% + \newcodeindex{fn}% + \newcodeindex{vr}% + \newcodeindex{tp}% + \newcodeindex{ky}% + \newcodeindex{pg}% } % @bye. @@ -1505,17 +1182,24 @@ where each line of input produces a line of output.} \let\env=\code \let\command=\code -% @uref (abbreviation for `urlref') takes an optional second argument -% specifying the text to display. First (mandatory) arg is the url. -% Perhaps eventually put in a hypertex \special here. +% @uref (abbreviation for `urlref') takes an optional (comma-separated) +% second argument specifying the text to display and an optional third +% arg as text to display instead of (rather than in addition to) the url +% itself. First (mandatory) arg is the url. Perhaps eventually put in +% a hypertex \special here. % -\def\uref#1{\urefxxx #1,,\finish} -\def\urefxxx#1,#2,#3\finish{% - \setbox0 = \hbox{\ignorespaces #2}% +\def\uref#1{\douref #1,,,\finish} +\def\douref#1,#2,#3,#4\finish{% + \setbox0 = \hbox{\ignorespaces #3}% \ifdim\wd0 > 0pt - \unhbox0\ (\code{#1})% + \unhbox0 % third arg given, show only that \else - \code{#1}% + \setbox0 = \hbox{\ignorespaces #2}% + \ifdim\wd0 > 0pt + \unhbox0\ (\code{#1})% second arg given, show both it and url + \else + \code{#1}% only url given, so show it + \fi \fi } @@ -2159,156 +1843,505 @@ where each line of input produces a line of output.} \multitablecolspace=12pt \multitablelinespace=0pt -% Macros used to set up halign preamble: +% Macros used to set up halign preamble: +% +\let\endsetuptable\relax +\def\xendsetuptable{\endsetuptable} +\let\columnfractions\relax +\def\xcolumnfractions{\columnfractions} +\newif\ifsetpercent + +% #1 is the part of the @columnfraction before the decimal point, which +% is presumably either 0 or the empty string (but we don't check, we +% just throw it away). #2 is the decimal part, which we use as the +% percent of \hsize for this column. +\def\pickupwholefraction#1.#2 {% + \global\advance\colcount by 1 + \expandafter\xdef\csname col\the\colcount\endcsname{.#2\hsize}% + \setuptable +} + +\newcount\colcount +\def\setuptable#1{% + \def\firstarg{#1}% + \ifx\firstarg\xendsetuptable + \let\go = \relax + \else + \ifx\firstarg\xcolumnfractions + \global\setpercenttrue + \else + \ifsetpercent + \let\go\pickupwholefraction + \else + \global\advance\colcount by 1 + \setbox0=\hbox{#1\unskip }% Add a normal word space as a separator; + % typically that is always in the input, anyway. + \expandafter\xdef\csname col\the\colcount\endcsname{\the\wd0}% + \fi + \fi + \ifx\go\pickupwholefraction + % Put the argument back for the \pickupwholefraction call, so + % we'll always have a period there to be parsed. + \def\go{\pickupwholefraction#1}% + \else + \let\go = \setuptable + \fi% + \fi + \go +} + +% multitable syntax +\def\tab{&\hskip1sp\relax} % 2/2/96 + % tiny skip here makes sure this column space is + % maintained, even if it is never used. + +% @multitable ... @end multitable definitions: +% +\def\multitable{\parsearg\dotable} +\def\dotable#1{\bgroup + \vskip\parskip + \let\item\crcr + \tolerance=9500 + \hbadness=9500 + \setmultitablespacing + \parskip=\multitableparskip + \parindent=\multitableparindent + \overfullrule=0pt + \global\colcount=0 + \def\Emultitable{\global\setpercentfalse\cr\egroup\egroup}% + % + % To parse everything between @multitable and @item: + \setuptable#1 \endsetuptable + % + % \everycr will reset column counter, \colcount, at the end of + % each line. Every column entry will cause \colcount to advance by one. + % The table preamble + % looks at the current \colcount to find the correct column width. + \everycr{\noalign{% + % + % \filbreak%% keeps underfull box messages off when table breaks over pages. + % Maybe so, but it also creates really weird page breaks when the table + % breaks over pages. Wouldn't \vfil be better? Wait until the problem + % manifests itself, so it can be fixed for real --karl. + \global\colcount=0\relax}}% + % + % This preamble sets up a generic column definition, which will + % be used as many times as user calls for columns. + % \vtop will set a single line and will also let text wrap and + % continue for many paragraphs if desired. + \halign\bgroup&\global\advance\colcount by 1\relax + \multistrut\vtop{\hsize=\expandafter\csname col\the\colcount\endcsname + % + % In order to keep entries from bumping into each other + % we will add a \leftskip of \multitablecolspace to all columns after + % the first one. + % + % If a template has been used, we will add \multitablecolspace + % to the width of each template entry. + % + % If the user has set preamble in terms of percent of \hsize we will + % use that dimension as the width of the column, and the \leftskip + % will keep entries from bumping into each other. Table will start at + % left margin and final column will justify at right margin. + % + % Make sure we don't inherit \rightskip from the outer environment. + \rightskip=0pt + \ifnum\colcount=1 + % The first column will be indented with the surrounding text. + \advance\hsize by\leftskip + \else + \ifsetpercent \else + % If user has not set preamble in terms of percent of \hsize + % we will advance \hsize by \multitablecolspace. + \advance\hsize by \multitablecolspace + \fi + % In either case we will make \leftskip=\multitablecolspace: + \leftskip=\multitablecolspace + \fi + % Ignoring space at the beginning and end avoids an occasional spurious + % blank line, when TeX decides to break the line at the space before the + % box from the multistrut, so the strut ends up on a line by itself. + % For example: + % @multitable @columnfractions .11 .89 + % @item @code{#} + % @tab Legal holiday which is valid in major parts of the whole country. + % Is automatically provided with highlighting sequences respectively marking + % characters. + \noindent\ignorespaces##\unskip\multistrut}\cr +} + +\def\setmultitablespacing{% test to see if user has set \multitablelinespace. +% If so, do nothing. If not, give it an appropriate dimension based on +% current baselineskip. +\ifdim\multitablelinespace=0pt +%% strut to put in table in case some entry doesn't have descenders, +%% to keep lines equally spaced +\let\multistrut = \strut +%% Test to see if parskip is larger than space between lines of +%% table. If not, do nothing. +%% If so, set to same dimension as multitablelinespace. +\else +\gdef\multistrut{\vrule height\multitablelinespace depth\dp0 +width0pt\relax} \fi +\ifdim\multitableparskip>\multitablelinespace +\global\multitableparskip=\multitablelinespace +\global\advance\multitableparskip-7pt %% to keep parskip somewhat smaller + %% than skip between lines in the table. +\fi% +\ifdim\multitableparskip=0pt +\global\multitableparskip=\multitablelinespace +\global\advance\multitableparskip-7pt %% to keep parskip somewhat smaller + %% than skip between lines in the table. +\fi} + + +\message{conditionals,} +% Prevent errors for section commands. +% Used in @ignore and in failing conditionals. +\def\ignoresections{% + \let\chapter=\relax + \let\unnumbered=\relax + \let\top=\relax + \let\unnumberedsec=\relax + \let\unnumberedsection=\relax + \let\unnumberedsubsec=\relax + \let\unnumberedsubsection=\relax + \let\unnumberedsubsubsec=\relax + \let\unnumberedsubsubsection=\relax + \let\section=\relax + \let\subsec=\relax + \let\subsubsec=\relax + \let\subsection=\relax + \let\subsubsection=\relax + \let\appendix=\relax + \let\appendixsec=\relax + \let\appendixsection=\relax + \let\appendixsubsec=\relax + \let\appendixsubsection=\relax + \let\appendixsubsubsec=\relax + \let\appendixsubsubsection=\relax + \let\contents=\relax + \let\smallbook=\relax + \let\titlepage=\relax +} + +% Used in nested conditionals, where we have to parse the Texinfo source +% and so want to turn off most commands, in case they are used +% incorrectly. +% +\def\ignoremorecommands{% + \let\defcodeindex = \relax + \let\defcv = \relax + \let\deffn = \relax + \let\deffnx = \relax + \let\defindex = \relax + \let\defivar = \relax + \let\defmac = \relax + \let\defmethod = \relax + \let\defop = \relax + \let\defopt = \relax + \let\defspec = \relax + \let\deftp = \relax + \let\deftypefn = \relax + \let\deftypefun = \relax + \let\deftypevar = \relax + \let\deftypevr = \relax + \let\defun = \relax + \let\defvar = \relax + \let\defvr = \relax + \let\ref = \relax + \let\xref = \relax + \let\printindex = \relax + \let\pxref = \relax + \let\settitle = \relax + \let\setchapternewpage = \relax + \let\setchapterstyle = \relax + \let\everyheading = \relax + \let\evenheading = \relax + \let\oddheading = \relax + \let\everyfooting = \relax + \let\evenfooting = \relax + \let\oddfooting = \relax + \let\headings = \relax + \let\include = \relax + \let\lowersections = \relax + \let\down = \relax + \let\raisesections = \relax + \let\up = \relax + \let\set = \relax + \let\clear = \relax + \let\item = \relax +} + +% Ignore @ignore ... @end ignore. +% +\def\ignore{\doignore{ignore}} + +% Ignore @ifinfo, @ifhtml, @ifnottex, @html, @menu, and @direntry text. +% +\def\ifinfo{\doignore{ifinfo}} +\def\ifhtml{\doignore{ifhtml}} +\def\ifnottex{\doignore{ifnottex}} +\def\html{\doignore{html}} +\def\menu{\doignore{menu}} +\def\direntry{\doignore{direntry}} + +% @dircategory CATEGORY -- specify a category of the dir file +% which this file should belong to. Ignore this in TeX. +\let\dircategory = \comment + +% Ignore text until a line `@end #1'. +% +\def\doignore#1{\begingroup + % Don't complain about control sequences we have declared \outer. + \ignoresections + % + % Define a command to swallow text until we reach `@end #1'. + % This @ is a catcode 12 token (that is the normal catcode of @ in + % this texinfo.tex file). We change the catcode of @ below to match. + \long\def\doignoretext##1@end #1{\enddoignore}% + % + % Make sure that spaces turn into tokens that match what \doignoretext wants. + \catcode32 = 10 + % + % Ignore braces, too, so mismatched braces don't cause trouble. + \catcode`\{ = 9 + \catcode`\} = 9 + % + % We must not have @c interpreted as a control sequence. + \catcode`\@ = 12 + % + % Make the letter c a comment character so that the rest of the line + % will be ignored. This way, the document can have (for example) + % @c @end ifinfo + % and the @end ifinfo will be properly ignored. + % (We've just changed @ to catcode 12.) + \catcode`\c = 14 + % + % And now expand that command. + \doignoretext +} + +% What we do to finish off ignored text. +% +\def\enddoignore{\endgroup\ignorespaces}% + +\newif\ifwarnedobs\warnedobsfalse +\def\obstexwarn{% + \ifwarnedobs\relax\else + % We need to warn folks that they may have trouble with TeX 3.0. + % This uses \immediate\write16 rather than \message to get newlines. + \immediate\write16{} + \immediate\write16{WARNING: for users of Unix TeX 3.0!} + \immediate\write16{This manual trips a bug in TeX version 3.0 (tex hangs).} + \immediate\write16{If you are running another version of TeX, relax.} + \immediate\write16{If you are running Unix TeX 3.0, kill this TeX process.} + \immediate\write16{ Then upgrade your TeX installation if you can.} + \immediate\write16{ (See ftp://ftp.gnu.org/pub/gnu/TeX.README.)} + \immediate\write16{If you are stuck with version 3.0, run the} + \immediate\write16{ script ``tex3patch'' from the Texinfo distribution} + \immediate\write16{ to use a workaround.} + \immediate\write16{} + \global\warnedobstrue + \fi +} + +% **In TeX 3.0, setting text in \nullfont hangs tex. For a +% workaround (which requires the file ``dummy.tfm'' to be installed), +% uncomment the following line: +%%%%%\font\nullfont=dummy\let\obstexwarn=\relax + +% Ignore text, except that we keep track of conditional commands for +% purposes of nesting, up to an `@end #1' command. +% +\def\nestedignore#1{% + \obstexwarn + % We must actually expand the ignored text to look for the @end + % command, so that nested ignore constructs work. Thus, we put the + % text into a \vbox and then do nothing with the result. To minimize + % the change of memory overflow, we follow the approach outlined on + % page 401 of the TeXbook: make the current font be a dummy font. + % + \setbox0 = \vbox\bgroup + % Don't complain about control sequences we have declared \outer. + \ignoresections + % + % Define `@end #1' to end the box, which will in turn undefine the + % @end command again. + \expandafter\def\csname E#1\endcsname{\egroup\ignorespaces}% + % + % We are going to be parsing Texinfo commands. Most cause no + % trouble when they are used incorrectly, but some commands do + % complicated argument parsing or otherwise get confused, so we + % undefine them. + % + % We can't do anything about stray @-signs, unfortunately; + % they'll produce `undefined control sequence' errors. + \ignoremorecommands + % + % Set the current font to be \nullfont, a TeX primitive, and define + % all the font commands to also use \nullfont. We don't use + % dummy.tfm, as suggested in the TeXbook, because not all sites + % might have that installed. Therefore, math mode will still + % produce output, but that should be an extremely small amount of + % stuff compared to the main input. + % + \nullfont + \let\tenrm = \nullfont \let\tenit = \nullfont \let\tensl = \nullfont + \let\tenbf = \nullfont \let\tentt = \nullfont \let\smallcaps = \nullfont + \let\tensf = \nullfont + % Similarly for index fonts (mostly for their use in + % smallexample) + \let\indrm = \nullfont \let\indit = \nullfont \let\indsl = \nullfont + \let\indbf = \nullfont \let\indtt = \nullfont \let\indsc = \nullfont + \let\indsf = \nullfont + % + % Don't complain when characters are missing from the fonts. + \tracinglostchars = 0 + % + % Don't bother to do space factor calculations. + \frenchspacing + % + % Don't report underfull hboxes. + \hbadness = 10000 + % + % Do minimal line-breaking. + \pretolerance = 10000 + % + % Do not execute instructions in @tex + \def\tex{\doignore{tex}}% + % Do not execute macro definitions. + % `c' is a comment character, so the word `macro' will get cut off. + \def\macro{\doignore{ma}}% +} + +% @set VAR sets the variable VAR to an empty value. +% @set VAR REST-OF-LINE sets VAR to the value REST-OF-LINE. +% +% Since we want to separate VAR from REST-OF-LINE (which might be +% empty), we can't just use \parsearg; we have to insert a space of our +% own to delimit the rest of the line, and then take it out again if we +% didn't need it. Make sure the catcode of space is correct to avoid +% losing inside @example, for instance. +% +\def\set{\begingroup\catcode` =10 + \catcode`\-=12 \catcode`\_=12 % Allow - and _ in VAR. + \parsearg\setxxx} +\def\setxxx#1{\setyyy#1 \endsetyyy} +\def\setyyy#1 #2\endsetyyy{% + \def\temp{#2}% + \ifx\temp\empty \global\expandafter\let\csname SET#1\endcsname = \empty + \else \setzzz{#1}#2\endsetzzz % Remove the trailing space \setxxx inserted. + \fi + \endgroup +} +% Can't use \xdef to pre-expand #2 and save some time, since \temp or +% \next or other control sequences that we've defined might get us into +% an infinite loop. Consider `@set foo @cite{bar}'. +\def\setzzz#1#2 \endsetzzz{\expandafter\gdef\csname SET#1\endcsname{#2}} + +% @clear VAR clears (i.e., unsets) the variable VAR. % -\let\endsetuptable\relax -\def\xendsetuptable{\endsetuptable} -\let\columnfractions\relax -\def\xcolumnfractions{\columnfractions} -\newif\ifsetpercent +\def\clear{\parsearg\clearxxx} +\def\clearxxx#1{\global\expandafter\let\csname SET#1\endcsname=\relax} -% #1 is the part of the @columnfraction before the decimal point, which -% is presumably either 0 or the empty string (but we don't check, we -% just throw it away). #2 is the decimal part, which we use as the -% percent of \hsize for this column. -\def\pickupwholefraction#1.#2 {% - \global\advance\colcount by 1 - \expandafter\xdef\csname col\the\colcount\endcsname{.#2\hsize}% - \setuptable +% @value{foo} gets the text saved in variable foo. +{ + \catcode`\_ = \active + % + % We might end up with active _ or - characters in the argument if + % we're called from @code, as @code{@value{foo-bar_}}. So \let any + % such active characters to their normal equivalents. + \gdef\value{\begingroup + \catcode`\-=12 \catcode`\_=12 + \indexbreaks \let_\normalunderscore + \valuexxx} } +\def\valuexxx#1{\expandablevalue{#1}\endgroup} -\newcount\colcount -\def\setuptable#1{% - \def\firstarg{#1}% - \ifx\firstarg\xendsetuptable - \let\go = \relax +% We have this subroutine so that we can handle at least some @value's +% properly in indexes (we \let\value to this in \indexdummies). Ones +% whose names contain - or _ still won't work, but we can't do anything +% about that. The command has to be fully expandable, since the result +% winds up in the index file. This means that if the variable's value +% contains other Texinfo commands, it's almost certain it will fail +% (although perhaps we could fix that with sufficient work to do a +% one-level expansion on the result, instead of complete). +% +\def\expandablevalue#1{% + \expandafter\ifx\csname SET#1\endcsname\relax + {[No value for ``#1'']}% \else - \ifx\firstarg\xcolumnfractions - \global\setpercenttrue - \else - \ifsetpercent - \let\go\pickupwholefraction - \else - \global\advance\colcount by 1 - \setbox0=\hbox{#1\unskip }% Add a normal word space as a separator; - % typically that is always in the input, anyway. - \expandafter\xdef\csname col\the\colcount\endcsname{\the\wd0}% - \fi - \fi - \ifx\go\pickupwholefraction - % Put the argument back for the \pickupwholefraction call, so - % we'll always have a period there to be parsed. - \def\go{\pickupwholefraction#1}% - \else - \let\go = \setuptable - \fi% + \csname SET#1\endcsname \fi - \go } -% multitable syntax -\def\tab{&\hskip1sp\relax} % 2/2/96 - % tiny skip here makes sure this column space is - % maintained, even if it is never used. +% @ifset VAR ... @end ifset reads the `...' iff VAR has been defined +% with @set. +% +\def\ifset{\parsearg\ifsetxxx} +\def\ifsetxxx #1{% + \expandafter\ifx\csname SET#1\endcsname\relax + \expandafter\ifsetfail + \else + \expandafter\ifsetsucceed + \fi +} +\def\ifsetsucceed{\conditionalsucceed{ifset}} +\def\ifsetfail{\nestedignore{ifset}} +\defineunmatchedend{ifset} -% @multitable ... @end multitable definitions: +% @ifclear VAR ... @end ifclear reads the `...' iff VAR has never been +% defined with @set, or has been undefined with @clear. % -\def\multitable{\parsearg\dotable} -\def\dotable#1{\bgroup - \vskip\parskip - \let\item\crcr - \tolerance=9500 - \hbadness=9500 - \setmultitablespacing - \parskip=\multitableparskip - \parindent=\multitableparindent - \overfullrule=0pt - \global\colcount=0 - \def\Emultitable{\global\setpercentfalse\cr\egroup\egroup}% - % - % To parse everything between @multitable and @item: - \setuptable#1 \endsetuptable - % - % \everycr will reset column counter, \colcount, at the end of - % each line. Every column entry will cause \colcount to advance by one. - % The table preamble - % looks at the current \colcount to find the correct column width. - \everycr{\noalign{% - % - % \filbreak%% keeps underfull box messages off when table breaks over pages. - % Maybe so, but it also creates really weird page breaks when the table - % breaks over pages. Wouldn't \vfil be better? Wait until the problem - % manifests itself, so it can be fixed for real --karl. - \global\colcount=0\relax}}% - % - % This preamble sets up a generic column definition, which will - % be used as many times as user calls for columns. - % \vtop will set a single line and will also let text wrap and - % continue for many paragraphs if desired. - \halign\bgroup&\global\advance\colcount by 1\relax - \multistrut\vtop{\hsize=\expandafter\csname col\the\colcount\endcsname - % - % In order to keep entries from bumping into each other - % we will add a \leftskip of \multitablecolspace to all columns after - % the first one. - % - % If a template has been used, we will add \multitablecolspace - % to the width of each template entry. - % - % If the user has set preamble in terms of percent of \hsize we will - % use that dimension as the width of the column, and the \leftskip - % will keep entries from bumping into each other. Table will start at - % left margin and final column will justify at right margin. - % - % Make sure we don't inherit \rightskip from the outer environment. - \rightskip=0pt - \ifnum\colcount=1 - % The first column will be indented with the surrounding text. - \advance\hsize by\leftskip +\def\ifclear{\parsearg\ifclearxxx} +\def\ifclearxxx #1{% + \expandafter\ifx\csname SET#1\endcsname\relax + \expandafter\ifclearsucceed \else - \ifsetpercent \else - % If user has not set preamble in terms of percent of \hsize - % we will advance \hsize by \multitablecolspace. - \advance\hsize by \multitablecolspace - \fi - % In either case we will make \leftskip=\multitablecolspace: - \leftskip=\multitablecolspace + \expandafter\ifclearfail \fi - % Ignoring space at the beginning and end avoids an occasional spurious - % blank line, when TeX decides to break the line at the space before the - % box from the multistrut, so the strut ends up on a line by itself. - % For example: - % @multitable @columnfractions .11 .89 - % @item @code{#} - % @tab Legal holiday which is valid in major parts of the whole country. - % Is automatically provided with highlighting sequences respectively marking - % characters. - \noindent\ignorespaces##\unskip\multistrut}\cr } +\def\ifclearsucceed{\conditionalsucceed{ifclear}} +\def\ifclearfail{\nestedignore{ifclear}} +\defineunmatchedend{ifclear} -\def\setmultitablespacing{% test to see if user has set \multitablelinespace. -% If so, do nothing. If not, give it an appropriate dimension based on -% current baselineskip. -\ifdim\multitablelinespace=0pt -%% strut to put in table in case some entry doesn't have descenders, -%% to keep lines equally spaced -\let\multistrut = \strut -%% Test to see if parskip is larger than space between lines of -%% table. If not, do nothing. -%% If so, set to same dimension as multitablelinespace. -\else -\gdef\multistrut{\vrule height\multitablelinespace depth\dp0 -width0pt\relax} \fi -\ifdim\multitableparskip>\multitablelinespace -\global\multitableparskip=\multitablelinespace -\global\advance\multitableparskip-7pt %% to keep parskip somewhat smaller - %% than skip between lines in the table. -\fi% -\ifdim\multitableparskip=0pt -\global\multitableparskip=\multitablelinespace -\global\advance\multitableparskip-7pt %% to keep parskip somewhat smaller - %% than skip between lines in the table. -\fi} +% @iftex, @ifnothtml, @ifnotinfo always succeed; we read the text +% following, through the first @end iftex (etc.). Make `@end iftex' +% (etc.) valid only after an @iftex. +% +\def\iftex{\conditionalsucceed{iftex}} +\def\ifnothtml{\conditionalsucceed{ifnothtml}} +\def\ifnotinfo{\conditionalsucceed{ifnotinfo}} +\defineunmatchedend{iftex} +\defineunmatchedend{ifnothtml} +\defineunmatchedend{ifnotinfo} + +% We can't just want to start a group at @iftex (for example) and end it +% at @end iftex, since then @set commands inside the conditional have no +% effect (they'd get reverted at the end of the group). So we must +% define \Eiftex to redefine itself to be its previous value. (We can't +% just define it to fail again with an ``unmatched end'' error, since +% the @ifset might be nested.) +% +\def\conditionalsucceed#1{% + \edef\temp{% + % Remember the current value of \E#1. + \let\nece{prevE#1} = \nece{E#1}% + % + % At the `@end #1', redefine \E#1 to be its previous value. + \def\nece{E#1}{\let\nece{E#1} = \nece{prevE#1}}% + }% + \temp +} + +% We need to expand lots of \csname's, but we don't want to expand the +% control sequences after we've constructed them. +% +\def\nece#1{\expandafter\noexpand\csname#1\endcsname} + +% @defininfoenclose. +\let\definfoenclose=\comment \message{indexing,} @@ -2596,24 +2629,28 @@ width0pt\relax} \fi \def\subentry{ #3}% \fi % - % First process the index-string with all font commands turned off - % to get the string to sort by. + % First process the index entry with all font commands turned + % off to get the string to sort by. {\indexnofonts \xdef\indexsorttmp{#2\subentry}}% % - % Now produce the complete index entry, with both the sort key and the - % original text, including any font commands. + % Now the real index entry with the fonts. \toks0 = {#2}% + % + % If third (subentry) arg is present, add it to the index + % string. And include a space. + \ifx\thirdarg\emptymacro \else + \toks0 = \expandafter{\the\toks0 \space #3}% + \fi + % + % Set up the complete index entry, with both the sort key + % and the original text, including any font commands. We write + % three arguments to \entry to the .?? file, texindex reduces to + % two when writing the .??s sorted result. \edef\temp{% \write\csname#1indfile\endcsname{% \realbackslash entry{\indexsorttmp}{\folio}{\the\toks0}}% }% % - % If third (subentry) arg is present, add it to the index string. - \ifx\thirdarg\emptymacro \else - \toks0 = {#3}% - \edef\temp{\temp{\the\toks0}}% - \fi - % % If a skip is the last thing on the list now, preserve it % by backing up by \lastskip, doing the \write, then inserting % the skip again. Otherwise, the whatsit generated by the @@ -4387,8 +4424,8 @@ width0pt\relax} \fi \defopvarparsebody\Edefcv\defcvx\defcvarheader\defcvtype} \def\defcvarheader #1#2#3{% -\dosubind {vr}{\code{#2}}{of #1}% Make entry in var index -\begingroup\defname {#2}{\defcvtype{}\putwordOf\ #1}% +\dosubind {vr}{\code{#2}}{\putwordof\ #1}% Make entry in var index +\begingroup\defname {#2}{\defcvtype\ \putwordof\ #1}% \defvarargs {#3}\endgroup % } @@ -4397,8 +4434,8 @@ width0pt\relax} \fi \def\defivar{\defvrparsebody\Edefivar\defivarx\defivarheader} \def\defivarheader #1#2#3{% -\dosubind {vr}{\code{#2}}{of #1}% Make entry in var index -\begingroup\defname {#2}{\putwordDefivar\putwordOf\ #1}% +\dosubind {vr}{\code{#2}}{\putwordof\ #1}% Make entry in var index +\begingroup\defname {#2}{\putwordDefivar\ \putwordof\ #1}% \defvarargs {#3}\endgroup % } @@ -4506,7 +4543,8 @@ width0pt\relax} \fi \begingroup \newlinechar`\^^M % Undo catcode changes of \startcontents and \doprintindex \catcode`\@=0 \catcode`\\=12 \escapechar=`\@ - \toks0={#1}% + % Append \endinput to make sure that TeX does not see the ending newline. + \toks0={#1\endinput}% \immediate\openout\macscribble=\jobname.tmp \immediate\write\macscribble{\the\toks0}% \immediate\closeout\macscribble @@ -4519,7 +4557,7 @@ width0pt\relax} \fi \begingroup \newlinechar`\^^M % Undo catcode changes of \startcontents and \doprintindex \catcode`\@=0 \catcode`\\=12 \escapechar=`\@ -\let\xeatspaces\eatspaces\scantokens{#1}\endgroup} +\let\xeatspaces\eatspaces\scantokens{#1\endinput}\endgroup} \fi \newcount\paramno % Count of parameters @@ -4633,7 +4671,7 @@ width0pt\relax} \fi \global\expandafter\let \csname ismacro.#1\endcsname=0% % Remove the macro name from \macrolist \begingroup - \edef\tempa{\expandafter\noexpand\csname#1\endcsname} + \edef\tempa{\expandafter\noexpand\csname#1\endcsname}% \def\do##1{% \def\tempb{##1}% \ifx\tempa\tempb @@ -4641,7 +4679,7 @@ width0pt\relax} \fi \else \toks0 = \expandafter{\newmacrolist\do}% \edef\newmacrolist{\the\toks0\expandafter\noexpand\tempa}% - \fi} + \fi}% \def\newmacrolist{}% % Execute macro list to define \newmacrolist \macrolist @@ -4714,7 +4752,7 @@ width0pt\relax} \fi \else % many \expandafter\xdef\csname\the\macname\endcsname{% \bgroup\noexpand\macroargctxt - \noexpand\csname\the\macname xx\endcsname} + \noexpand\csname\the\macname xx\endcsname}% \expandafter\xdef\csname\the\macname xx\endcsname##1{% \expandafter\noexpand\csname\the\macname xxx\endcsname ##1,}% \expandafter\expandafter @@ -4741,7 +4779,7 @@ width0pt\relax} \fi \else % many \expandafter\xdef\csname\the\macname\endcsname{% \bgroup\noexpand\macroargctxt - \expandafter\noexpand\csname\the\macname xx\endcsname} + \expandafter\noexpand\csname\the\macname xx\endcsname}% \expandafter\xdef\csname\the\macname xx\endcsname##1{% \expandafter\noexpand\csname\the\macname xxx\endcsname ##1,}% \expandafter\expandafter @@ -4772,6 +4810,11 @@ width0pt\relax} \fi \def\turnoffmacros{\begingroup \def\do##1{\let\noexpand##1=\relax}% \edef\next{\macrolist}\expandafter\endgroup\next} + +% @alias. +\def\alias#1=#2{\gdef#1{#2}} + + \message{cross references,} \newwrite\auxfile @@ -4828,7 +4871,7 @@ width0pt\relax} \fi \indexdummies \dosetq{#1-title}{Ytitle}% \dosetq{#1-pg}{Ypagenumber}% - \dosetq{#1-snt}{#2} + \dosetq{#1-snt}{#2}% }} % @xref, @pxref, and @ref generate cross-references. For \xrefX, #1 is @@ -5257,9 +5300,40 @@ width0pt\relax} \fi } -\message{paper sizes,} -% And other related parameters. +\message{localization,} + +% @documentlanguage is usually given very early, just after +% @setfilename. If done too late, it may not override everything +% properly. Single argument is the language abbreviation. +% It would be nice if we could set up a hyphenation file here. +% +\def\documentlanguage{\parsearg\dodocumentlanguage} +\def\dodocumentlanguage#1{% + \tex % read txi-??.tex file in plain TeX. + % Read the file if it exists. + \openin 1 txi-#1.tex + \ifeof1 + \errhelp = \nolanghelp + \errmessage{Cannot read language file txi-#1.tex}% + \let\temp = \relax + \else + \def\temp{\input txi-#1.tex }% + \fi + \temp + \endgroup +} +\newhelp\nolanghelp{The given language definition file cannot be found or +is empty. Maybe you need to install it? In the current directory +should work if nowhere else does.} + + +% @documentencoding should change something in TeX eventually, most +% likely, but for now just recognize it. +\let\documentencoding = \comment + +% Page size parameters. +% \newdimen\defaultparindent \defaultparindent = 15pt \chapheadingskip = 15pt plus 4pt minus 2pt @@ -5279,8 +5353,7 @@ width0pt\relax} \fi % Use TeX 3.0's \emergencystretch to help line breaking, but if we're % using an old version of TeX, don't do anything. We want the amount of % stretch added to depend on the line length, hence the dependence on -% \hsize. This makes it come to about 9pt for the 8.5x11 format. We -% call this whenever the paper size is set. +% \hsize. We call this whenever the paper size is set. % \def\setemergencystretch{% \ifx\emergencystretch\thisisundefined @@ -5288,7 +5361,7 @@ width0pt\relax} \fi \def\emergencystretch{\dimen0}% \else \emergencystretch = \hsize - \divide\emergencystretch by 45 + \divide\emergencystretch by 40 \fi } @@ -5547,6 +5620,6 @@ width0pt\relax} \fi @c eval: (add-hook 'write-file-hooks 'time-stamp) @c page-delimiter: "^\\\\message" @c time-stamp-start: "def\\\\texinfoversion{" -@c time-stamp-format: "%:y-%02m-%02d" +@c time-stamp-format: "%:y-%02m-%02d.%H" @c time-stamp-end: "}" @c End: -- cgit v1.2.3